The influences of lubricant groove shape on the tribological properties of journal bearing under the grease lubrication conditions

Abstract

Purpose

This paper aims to elucidate the effects of lubricant groove shape, vertical load, swing angle and grease injection cycle on the friction and wear performances of journal bearings under the grease lubrication condition.

Design/methodology/approach

Three different types of lubricant grooves, namely, numeral eight-shaped, axial straight line-shaped and circular blind hole-shaped, were designed and machined in the bearing bush of journal bearings. The tribological behaviors of these journal bearings were investigated on the self-developed reciprocating swing friction and wear tester. Experimental data including the friction coefficient, the friction temperature, the wear loss and wear time were analyzed in detail. The wear morphologies of friction pairs were observed by scanning electron microscope and confocal laser scanning microscope.

Findings

The load carrying capacity and service life of the journal bearing with circular blind hole-shaped lubricant grooves are not affected. However, the load carrying capacities of journal bearings with numeral eight-shaped and axial straight line-shaped lubricant grooves are declined. The coverage areas of lubricating grease in the bearing bush are associated with the swing angle. The smaller the swing angle is, the more limited the coverage areas of lubricating grease get. Among these journal bearings, the maintenance-free time of journal bearing with circular blind hole-shaped lubricant grooves is the longest because of its large grease storage capacity.

Originality/value

The journal bearing with circular blind hole-shaped lubricant grooves exhibits the excellent antifriction and wear-resistant properties, making it suitable for the application in the low-speed and heavy-load engineering conditions.

Citation

Yan, S., Xue, Y., Wei, L. and Wang, Z. (2021), "The influences of lubricant groove shape on the tribological properties of journal bearing under the grease lubrication conditions", Industrial Lubrication and Tribology, Vol. 73 No. 3, pp. 493-499. https://doi.org/10.1108/ILT-12-2020-0443