Tribological properties of nanometer Al2O3 and nanometer ZnO as additives in lithium-based grease
Industrial Lubrication and Tribology
ISSN: 0036-8792
Article publication date: 4 July 2018
Issue publication date: 17 August 2018
Abstract
Purpose
Nanoparticles as the grease additives play an important role in anti-wear and friction-reducing property during the mechanical operation. To improve the lubrication action of grease, the tribological behavior of lithium-based greases with single (nanometer Al2O3 or nanometer ZnO) and composite additives (Al2O3–ZnO nanoparticles) were investigated in this paper.
Design/methodology/approach
The morphology and microstructure of nanoparticles were characterized by means of transmission electron microscope and X-ray diffraction. Tribological properties of different nanoparticles as additives in lithium-based greases were evaluated using a universal friction and wear testing machine. In addition, the friction coefficient (COF) and wear scar diameter were analyzed. The surface morphology and element overlay of the worn steel surface were analyzed by scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS), respectively.
Findings
The results show that the greases with nanometer Al2O3 or nanometer ZnO and the composite nanoparticles additives both exhibit lower COFs and wear scar diameters than those of base grease. And the grease with Al2O3–ZnO composite nanoparticles possesses much lower COF and shows much better wear resistance than greases with single additives. When the additives contents are 0.4 Wt.% Al2O3 and 0.6 Wt.% ZnO, the composite nanoparticles-based grease exhibits the lowest mean COF (0.04) and wear scar diameter (0.65 mm), which is about 160% and 28% lower than those of base grease, respectively.
Originality/value
The main innovative thought of this work lies in dealing with the grease using single or composite nanoparticles. And through a serial contrast experiments, the anti-wear and friction-reducing property with different nanoparticles additives in lithium grease are evaluated.
Keywords
Acknowledgements
This research project was supported by the National Natural Science Foundation of China (51105002), the National Science and Technology Major Project (2012ZX04005-021), the Natural Science Foundation of the Henan Province (152102210196) and the Foundation of the Henan Educational Committee (16A460001).
Citation
He, Q., Wang, Z., Li, A., Guo, Y. and Liu, S. (2018), "Tribological properties of nanometer Al2O3 and nanometer ZnO as additives in lithium-based grease", Industrial Lubrication and Tribology, Vol. 70 No. 6, pp. 953-960. https://doi.org/10.1108/ILT-10-2016-0241
Publisher
:Emerald Publishing Limited
Copyright © 2018, Emerald Publishing Limited