Transient thermal elastohydrodynamic lubrication of point contacts subjected to normal vibration

Abstract

Purpose

Vibration exists widely in all machineries working under high speed. The unpredictability of vibration and the change of the relative surface speed may result in difficulties in the elastohydrodynamic lubrication (EHL) analysis. By far, few studies on EHL relating to vibration have been published. The purpose of the present study is to investigate the effect of the vertical vibrations and the influence of temperature on the thermal EHL contacts.

Design/methodology/approach

The lubricant was assumed to be Newtonian fluid. The time-dependent numerical solutions were achieved instant after instant in each period of the vibration. At each instant, the pressure field was solved with a multi-level technique, the surface deformation was solved with a multi-level multi-integration method and the temperature filed was solved with a finite different scheme through a sweeping progress. The periodic error was checked at each end of the vibration period until the responses of pressure, film thickness and temperature were all periodic functions with the frequency of the roller’s vibrations.

Findings

The results reveal that normal vibration produces little drastic change of pressure, film thickness and temperature in EHL. Under some conditions, the vibrations of the roller can produce transient dimples within the contact conjunction. It is also showed that the lubrication in the same sliding is better than the opposite sliding.

Research limitations/implications

For the unpredictability of vibration, it is not easy to do the experiment to realize a real comparison with numerical results. The reach does not show any verification and consider the effect of non-Newtonian fluid.

Originality/value

The effect of the vertical vibrations on the thermal EHL point contact hast been studied. The effects of both the amplitude and the frequency on the predicted load-carrying capacity, minimum film thickness, center pressure and center temperature and the coefficient of friction were investigated. The role of the thermal effect was given.

Citation

Zhang, J., Ni, Q., Wang, J. and Guo, F. (2016), "Transient thermal elastohydrodynamic lubrication of point contacts subjected to normal vibration", Industrial Lubrication and Tribology, Vol. 68 No. 5, pp. 536-547. https://doi.org/10.1108/ILT-06-2015-0085