Fretting fatigue behavior and failure characteristics of 35CrMoA steel under elliptical loading path

Abstract

Purpose

This study aims to understand the multiaxial fretting fatigue, wear and fracture characteristics of 35CrMoA steel under the elliptical loading path.

Design/methodology/approach

By keeping the contact pressure and torsional shear cyclic stress amplitude unchanged; the axial cyclic stress amplitude varied from 650 MPa to 850 MPa. The fretting fatigue test was carried out on MTS809 testing machine, and the axial cyclic strain response and fatigue life of the material were analyzed. The fretting zone and fracture surface morphology were observed by scanning electron microscope. The composition of wear debris was detected by energy dispersive X-ray spectrometer.

Findings

In this study, with the increase of axial stress amplitude, 35CrMoA steel will be continuously softened, and the cyclic softening degree increases. The fretting fatigue life decreases unevenly. The fretting scars in the stick region are elongated in the axial direction. The area of fracture crack propagation zone decreases. In addition, the results indicate that wear debris in the slip region is spherical and has higher oxygen content.

Originality/value

There were few literatures about the multiaxial fretting fatigue behavior of 35CrMoA steel, and most scholars focused on the contact pressure. This paper reveals the effect of axial cyclic stress on fretting fatigue and wear of 35CrMoA steel under the elliptical loading path.

Citation

Huang, Z., Liu, X., He, G., Zhou, Z., Ge, B., Le, P., Pan, J. and Xu, X. (2021), "Fretting fatigue behavior and failure characteristics of 35CrMoA steel under elliptical loading path", Industrial Lubrication and Tribology, Vol. 73 No. 6, pp. 922-928. https://doi.org/10.1108/ILT-04-2021-0121