Friction and wear properties of an automobile brake lining reinforced by lignin fiber and glass fiber
Abstract
Purpose
This paper aims to thrash out friction and wear properties of automobile brake lining reinforced by lignin fiber and glass fiber in braking process.
Design/methodology/approach
ABAQUS finite element software was used to analyze thermo-mechanical coupled field of friction materials. XD-MSM constant speed friction testing machine was used to test friction and wear properties of friction material. Worn surface morphology and mechanism of friction materials were observed by using scanning electron microscope.
Findings
The results show that when the temperature was below 350°C, worn mechanism of MFBL was mainly fatigue wear and abrasive wear, and worn mechanism of GFBL was mainly fatigue wear because MFBL contained lignin fiber. Therefore, it exhibits better mechanical properties and friction and wear properties than those of GFBL.
Originality/value
Lignin fiber can improve mechanical properties and friction and wear properties of the automobile brake lining.
Keywords
Acknowledgements
This work was supported by National Natural Science Foundation of China (grant no. 51575234) and Shandong province Natural Science Foundation (grant no. ZR2015JL018, ZR2014EL026) and Key R&D Program of Shandong province (grant no. 2015GNC112009).
Citation
Chengmin, W., Xuefeng, Y., Xiguang, C., Tao, M., Yunxi, L. and Peilong, S. (2017), "Friction and wear properties of an automobile brake lining reinforced by lignin fiber and glass fiber", Industrial Lubrication and Tribology, Vol. 69 No. 5, pp. 775-781. https://doi.org/10.1108/ILT-03-2016-0074
Publisher
:Emerald Publishing Limited
Copyright © 2017, Emerald Publishing Limited