Optimizing on hydrostatic structural parameters for regulatable dry gas seal based on central composite design test

Abstract

Purpose

This paper aims to introduce a new type of analysis method to seek the actual working performance of the regulatable dry gas seal, including equilibrium film thickness, stiffness-leakage ratio and so on. Additionally, a parametric optimization of the hydrostatic structure is completed for this kind of seal.

Design/methodology/approach

From the point of axial force balance based on gas lubrication theory, a new analysis method, the Gas Film Divided Method, has been introduced. A four-factor and three-level hydrostatic structural parameters test scheme is designed by means of Central Composite Design test and then the hydrostatic structural parameters of regulatable dry gas seal were optimized. Three types of regulatable dry gas seal have been designed and manufactured to verify the theoretical analysis by measuring the equilibrium film thickness and inward leakage.

Findings

The results indicate that the numerical values of the Gas Film Divided (GFD) method agree well with the experimental ones. Test proves that the Central Composite Design test could achieve optimized hydrostatic structural parameters of regulatable dry gas seal effectively.

Research limitations/implications

For validating the correctness of the GFD method, an experiment study of the regulatable dry gas seal is being carried out where atmosphere is selected as the lubricant for the sake of safety. Soon after, the author will discuss the application in the new paper.

Originality/value

The introduction of the GFD method proffers important insights to seek the performances of regulatable dry gas seal under the actual working conditions. The detailed optimal values of the hydrostatic structural parameters were given by the theoretical research which may be helpful for the design of regulatable dry gas seal.

Citation

Jin, Z., Li, S., Cai, J. and zhang, q. (2016), "Optimizing on hydrostatic structural parameters for regulatable dry gas seal based on central composite design test", Industrial Lubrication and Tribology, Vol. 68 No. 1, pp. 99-105. https://doi.org/10.1108/ILT-03-2015-0027