Computer simulation of weld toe stress concentration factor sequence for fatigue analysis

Abstract

Purpose

The purpose of this paper is to complete fatigue analysis of welded joints considering both the crack initiation sites and crack coalescence, and to generate virtual welded specimens for computer simulation of fatigue life on a specimen-by-specimen basis; knowledge regarding the weld toe stress concentration factor (SCF) sequence is essential. In this study, attempts were made to analyze the sequence and to find a simple method to generate the sequence using computers.

Design/methodology/approach

Laser scanning technique was used to acquire the real three-dimensional weld toe geometry of welded specimens. The scanned geometry was digitally sectioned, and three-dimensional finite element (FE) models of the scanned specimens were constructed and the weld toe SCF sequence was calculated. The numbers in the sequence were analyzed using a simple autoregression model and the statistical properties of the sequence were acquired.

Findings

The autoregression analysis showed the value of a weld toe SCF is linearly related to its neighboring factor with a high correlation. When a factor value at a toe location is known, the neighboring factor can be simulated by a simple linear equation with a random residual. The weld toe factor sequence can thus be formed by repeatedly using the linear equation with a residual. The generated sequence exhibits close statistical properties to those of the real sequence obtained from FE results.

Practical implications

When the weld toe SCF sequence is known, it is possible to foresee potential crack locations and the subsequent crack coalescence. The results of the current study will be the foundation for the future work on fatigue analysis of welded joints considering the effects of crack initiation site and crack coalescence.

Originality/value

The weld toe SCF sequence was rarely discussed previously because of a lack of the available data. The current study is the first work to investigate the statistical properties of the sequence and found that a simple autoregression equation can be used to perform the analysis. This study is also the first work that successfully generates a weld toe SCF sequence, which can be used to simulate virtual welded specimens.

Citation

Hou, C.-Y. (2019), "Computer simulation of weld toe stress concentration factor sequence for fatigue analysis", International Journal of Structural Integrity, Vol. 10 No. 6, pp. 792-808. https://doi.org/10.1108/IJSI-11-2018-0086