International Journal of Structural Integrity
Issue(s) available: 79 – From Volume: 1 Issue: 1, to Volume: 15 Issue: 5
Volume 14
Volume 12
Volume 11
Volume 10
Volume 9
Volume 8
Volume 7
Volume 6
Volume 5
Volume 4
Volume 3
Volume 2
Machine learning-based design of double corrugated steel plate shear walls
Elyas Baboli Nezhadi, Mojtaba Labibzadeh, Farhad Hosseinlou, Majid KhayatIn this study, machine learning (ML) algorithms were employed to predict the shear capacity and behavior of DCSWs.
A FEM-based model for failure initiation in the microstructure of gray cast iron under uniaxial compression
Zhen Li, Zhao Lei, Hengyang Sun, Bin Li, Zhizhong QiaoThe purpose of this study was to validate the feasibility of the proposed microstructure-based model by comparing the simulation results with experimental data. The study also…
Development and performance evaluation of a polyurethane elastomer based seamless expansion joint for bridges
Yuxuan Wu, Wenyuan Xu, Tianlai Yu, Yongcheng Ji, Xingyu WangThis study aims to address the degradation and damage of traditional bridge expansion joints by proposing a seamless expansion joint device based on polyurethane elastomer (PUE).
Comparison of inelasticity creep failure evaluation codes for elevated-temperature non-nuclear pressure equipment
Wei Gong, Xiao-Yan Wang, Xiao Wang, Wen Wang, Yan-Li YangTo ensure the reliable and safe operation of elevated-temperature pipes and equipment in the long term, it is essential to thoroughly assess the creep rupture life. Nevertheless…
A reliability calculation method based on ISSA-BP neural network
Jingyuan Wang, Yong-Hua Li, Denglong Wang, Min ChaiTo address the shortcomings of the traditional back propagation (BP) neural network agent model, such as insufficient fitting accuracy and low computational efficiency, an…
Developing a severe gust load spectrum for transport aircraft based on measured load data
Kunyu Wei, Bowen Li, Xiaofan HeDeveloping severe load spectrum of transport aircraft structures is crucial for enhancing the fatigue damage correlation between full-scale fatigue testing results and operational…
Effect of repair patch nature on J-integral reduction in notched plates
Amin Houari, Madani Kouider, Alper Polat, Salah Amroune, Barhm Abdullah Mohamad, Ahmed Chellil, Raul CampilhoThe purpose of this research is to evaluate the effectiveness of different repair patch materials in reducing the stresses at the crack tip of a 2024-T3 aluminum plate. This…
Development and testing of a thermal self-straining preloading test setup for reinforced concrete beams and slabs to perform thermomechanical action
M. Vishal, K.S. Satyanarayanan, M. Prakash, Rakshit Srivastava, V. ThirumuruganAt this moment, there is substantial anxiety surrounding the fire safety of huge reinforced concrete (RC) constructions. The limitations enforced by test facilities, technology…
Structural integrity assessment of an offshore platform using RB-FEA
Felice Di Nicola, Graziano Lonardi, Nicholas Fantuzzi, Raimondo LucianoThe paper aims to analyze the structural integrity of an existing offshore platform located in the Northern Adriatic Sea, followed by the topside decommissioning and the…
Effect of spinning for different nose shape projectiles undergoing normal impact on Al 7075-T651 target
Pranay Vaggu, S.K. PanigrahiThe effect of spinning has been studied and analysed for different projectile shapes such as ogive, blunt, cylindrical and conical by using numerical simulations.
Determination of the influence of FDM printing parameters on tensile strength and fracture occurrence of additively manufactured ABS material
Marko Delić, Vesna Mandić, Srbislav Aleksandrović, Dušan Arsić, Djordje IvkovićThe impact of the application of hollow structures through variations of infill patterns and their density on the tensile properties was considered. The mechanical properties of…
Comparative study of corrosion-based service life prediction of reinforced concrete structures using traditional and machine learning approach
Amgoth Rajender, Amiya K. Samanta, Animesh ParalAccurate predictions of the steady-state corrosion phase and service life to achieve specific safety limits are crucial for assessing the service of reinforced concrete (RC…
Research of criteria for analyzing the load-bearing capacity of buildings in areas of technogenic impact caused by mining operations
Georgiy Gusev, Roman Tsvetkov, Igor ShardakovThis study aims to ensure safe operation of buildings in the mining area.
Sustainability and environmental life cycle analysis of welding processes
Elisaveta Doncheva, Nikola Avramov, Aleksandra Krstevska, Martin Petreski, Jelena Djokikj, Marjan DjidrovWelding is a widely used manufacturing process in many industries. The process consumes a lot of energy and resources, pollutes the environment, and emits gases and fumes into the…
Tensile, flexural and free vibration characteristics of sustainable recycled polypropylene filled with spherical SiC through experimental and RVE analysis
Santosh Kumar Sahu, P.S. Rama Sreekanth, Y.P. Deepthi, Quanjin Ma, Tunji John ErinleThis study aims to investigate the mechanical properties of sustainable recycled polypropylene (rPP) composite materials integrated with spherical silicon carbide (SiC) particles.
ISSN:
1757-9864e-ISSN:
1757-9872ISSN-L:
1757-9864Online date, start – end:
2010Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditors:
- Dr. José A.F.O. Correia
- Prof. Shun-Peng Zhu
Further Information
