Precipitation of ZnO‐SiO₂ oxide composites in the presence of natural rubber latex and selected non‐ionic surfactants

Abstract

Purpose

The purpose of this paper is to obtain ZnO‐SiO₂ oxide composites of low bulk density, high homogeneity and consisting of the smallest possible particles. The optimum parameters of precipitation of ZnO‐SiO₂ oxide composites impregnated with natural latex rubber were established. The formation and impregnation the ZnO‐SiO₂ oxide composites were made to occur simultaneously.

Design/methodology/approach

The influence of non‐ionic surfactants added during the precipitation process on the physico‐chemical properties of the oxide systems obtained was investigated. The products were characterised by determination of bulk density, absorption capacities of water and paraffin oil, particle size distribution (applying NIBS and laser diffraction methods), as well as SEM observations of surface morphology and microstructure. Moreover, the colorimetric characteristics of the oxide composites obtained and sedimentation profiles in water were analysed. Energo‐dispersive microanalysis of the products enabled determination of the content of ZnO and SiO₂. The surface area (BET) and the size and volume of pores were also estimated.

Findings

Modification of the oxide composites with nonylphenylpolyoxyethyleneglycol ethers was found to improve the basic physico‐chemical parameters of the ZnO‐SiO₂ hybrid systems and to change the character of its surface to become more hydrophobic. The conditions in which samples with the best properties were obtained were concluded to be optimum.

Research limitations/implications

Only the selected non‐ionic surfactants were applied as modifying agents of ZnO‐SiO₂.

Practical implications

There is a possible application of ZnO‐SiO₂ oxide composites as activators of rubber compounds and barrier materials in textiles.

Originality/value

The proposed method of ZnO‐SiO₂ oxide composite synthesis in the process of precipitation with simultaneous modification with non‐ionic surfactants provides products with desirable dispersive‐morphological parameters and a hydrophobic surface character.

Citation

Laurentowska, A., Ciesielczyk, F., Siwińska‐Stefańska, K. and Jesionowski, T. (2012), "Precipitation of ZnO‐SiO₂ oxide composites in the presence of natural rubber latex and selected non‐ionic surfactants", Pigment & Resin Technology, Vol. 41 No. 4, pp. 199-209. https://doi.org/10.1108/03699421211242428