Case studies

The authors have discussed the importance of creating socially transformative health-care ecosystems in emerging economies like India. After completion of this case study and assignment questions, the students will be able to apply the case experience to comprehend the underlying factors influencing the decision of the implementation and replication of the Sanjeevani health-care service delivery model, understand the impact of free and subsidized health-care service delivery models on social transformation, evaluate the operational performance of health-care institutions using the balanced scorecard model and create practical relevance when implementing novel health-care solutions like Sanjeevani, which has been successful due to its singular pin-pointed focus on solving the issue of congenital heart diseases (CHDs).

Forty thousand surgeries against 0.3 million new CHD patients every year was the unbalanced equation of pediatric cardiac care in India. It also contributed to almost 46% of total CHD prevalence in the world. This case study explores the evolution of the affordable health-care ecosystem provided by Sri Sathya Sai Sanjeevani Hospital (Sanjeevani), Raipur, Chhattisgarh, which included services ranging from OPD to postoperative surgical care, including accommodation and food, completely free of cost. Over the past eight years, it had managed over 80,000 pediatric cardiac outpatients and performed over 9,000 surgeries. This case study also outlines the execution of Sanjeevani, as an affordable health venture aimed at producing social transformation. The pertinent question to be explored is, “Can the Sanjeevani healthcare ecosystem be replicated, both operationally and financially?”

This case study is suited to undergraduate Bachelor of Business Administration, Master of Business Administration (MBA) and executive MBA.

Teaching notes are available for educators only.

CSS 2: Built Environment.

The learning outcomes are as follows: to identify and analyze the importance of operations management in a situation demanding minimizing environmental impact and maintaining operational momentum; access the risks faced during project executions and apply project management concepts to facilitate Karachi Steel in implementing indigenous technological solutions; and evaluate the importance of adaptability, continuous improvement and innovation in creating sustainable solutions to address complex challenges.

Javaid Iqbal, CEO of Karachi Steel, was the case’s protagonist. With capacity expansion, Javaid relocated the steel facility from Rawalpindi to Islamabad, Pakistan. The company encountered several difficulties because of the air emissions’ inconvenience to nearby residents and the strict environmental regulations. To push the emissions into the air, the company first installed a locally fabricated chimney. Later, they hired a foreign Pakistani engineering firm to install air filters, but the project proved unsuccessful. To control emissions, the company developed a Wet Particulate Control (WPC) system based on a water-sprinkling mechanism. The endeavor was successful, but it resulted in water pollution. As a result, Karachi Steel signed a contract with a local engineering company that invented and effectively installed an air filtration system. Karachi Steel not only devised solutions for their predicaments but also made significant contributions toward achieving the Sustainable Development Goals (SDGs). However, the emissions reporting and monitoring mechanism continued to cause inconvenience for regulators. In addition, the filtration facility encountered a blocked duct conveying zinc sulfate from smoke, resulting in the periodic suspension of operations. As Karachi Steel seek long-term solutions to current challenges, it is critical to examine the relationship between internal circumstances and external forces and stimulate a holistic approach to resolving issues within the realms of operations management and project management.

The case study is suitable for students pursuing their undergraduate degree programs in business studies or management sciences. This case can be taught in specific subjects in the domain of management sciences, including project management and operations management. Furthermore, undergraduate students pursuing degrees in environmental sciences, specializing in environmental impact assessment and sustainable development, can also learn from this case study. These subjects have the potential to provide students with a detailed understanding of the dynamic relationship between environmental problems caused by business activities, and how to address these challenges using principles of project management and operations management. There is no pre-requisite for this case study, and the level of difficulty is moderate. The recommended teaching pedagogy for this multidisciplinary case study includes role-playing exercises, simulations to replicate real-world situations and the Socratic method, which encourages critical thinking.

Teaching notes are available for educators only.

CSS 7: Management Science.

Risk identification and qualitative assessment are the learning outcomes.

The Bharat Bijlee Construction Limited (BBCL) was one of the largest construction companies operating in the power sector in India. After successfully completing a few projects in the Middle East, BBCL decided to expand its presence into African region. The BBCL was awarded a $85m contract for three sub-station projects to modernise Algeria’s power grid system by the “Shariket Karhaba Koudiet Eddraouch Spa”, a state-owned company in charge of power generation, transmission and distribution in Algeria.

The project, which is the first of BBCL in Saharan region in Algeria’s, presents many unique situations that company had never encountered before, including sand dunes, severe weather, remote locations, supply chain & logistics, strict contractual deadlines and a high level of construction risk. The project manager for BBCL was sceptic about how well his company would perform under the present project circumstances. How could he better align himself with the client, the various on-site local contractors and the numerous suppliers spread around the world?

The case emphasises the identification of various project risks that the project manager might encounter in the project. What do the PESTLE and ASCE frameworks for risk identification each represent, and how are they helpful for the project team in understanding various risks? How should the project’s qualitative risk assessment be conducted? And how can a heat map be a better tool for comprehending the criticality of each risk in the project?

Undergraduate and post graduate courses in project management, civil engineering and architecture domain.

Teaching notes are available for educators only.

CSS 2: Built Environment.

The primary learning objectives/outcome of case discussion is to apply design thinking principles to design innovative and socially responsible strategies that promote financial sustainability for organizations serving unique societal needs. The secondary learning objectives/outcome of case discussion is to gain a deeper appreciation for the potential social impact of their innovative ideas and understand the complexities and ethical considerations in social entrepreneurship, especially when working with individuals with special needs.

The case study describes the challenge facing Anil Kumar Kundra, the founder and trustee of Autism Ashram and Autism Guardian Village in Hyderabad and Gujarat, an organization that provides shelter and care for individuals with autism and residential facilities for their parents. Autistic individuals often lack social skills and may face challenges in reading, writing and communicating. In addition, they may experience behavioral issues, making it difficult for them to obtain employment or run their own ventures, resulting in a lifetime financial dependency on their guardians. In August 2023, Kundra, in pursuit of sustainability, aims to empower autistic individuals in the ashram to attain financial independence. He envisions Autism Ashrama as a self-sustaining entity, no longer dependent on contributions from parents. The dilemma facing Kundra is the need to identify innovative ideas that will enable these autistic individuals to contribute to revenue generation. The challenges faced by autistic individuals in their day-to-day lives make Kundra’s decision-making complex. While he acknowledges the challenge, he firmly believes that a handful of transformative ideas can bring about a revolutionary shift in the ecosystem for autistic individuals, rendering this business model truly sustainable. The case study invites students to help Kundra identify innovative ideas using design idea techniques, such as the Stanford d.school model.

This take-home assignment is suitable for both undergraduate and postgraduate students and is designed to explore the integration of sustainable business practices and design thinking in a real-world context.

Teaching notes are available for educators only.

CSS 7: Management science.

After reading the case and answering the case assignments, students will be able to understand and explain the challenges and opportunities for engineering, procurement and construction (EPC) contractors and their subcontractors; understand and critically analyse the advantages and disadvantages of insourcing and outsourcing of engineering, procurement and construction in EPC projects; determine which situations merit insourcing or outsourcing within each of engineering, procurement and construction in EPC projects; understand and identify the competencies and qualifications that a subcontractor must possess if any EPC activity is outsourced to them; and develop a decision-making framework to determine which EPC activities must be kept in-house or outsourced in EPC projects.

In mid-March 2021, PetroSahand International Group, a leading EPC contractor specializing in the oil, gas and petrochemicals industries in Iran, encountered significant challenges with its subcontractors in engineering and construction. These issues resulted in widespread repercussions for the company, including project delays and mounting debts. At the peak of these crises, PetroSahand’s senior management embarked on a thorough examination of whether to insource or outsource various aspects of their operations, such as engineering, procurement and construction. Their objective was twofold: to prevent similar setbacks in future projects and to navigate existing projects with minimal disruption to the company’s reputation. To address this critical dilemma, PetroSahand enlisted the expertise of a consulting team from Sharif University of Technology. Comprising esteemed professors, graduates and students from one of Iran’s most respected institutions, this team undertook an exhaustive analysis of the insourcing versus outsourcing debate across EPC domains. Subsequently, they presented their comprehensive findings, thereby confronting PetroSahand’s senior management with a pivotal choice regarding the optimal approach for each activity.

The audience of this work is undergraduate and graduate students who are enrolled in project management courses, both fundamentals and advanced. In addition, this case helps senior managers of EPC contractors gain a deeper and more comprehensive understanding of insourcing or outsourcing different project activities.

Teaching notes are available for educators only.

CSS 7: Management science.

After completion of the case study, the participants will be able to understand the significance of quality as a pivotal domain within project management and to analyze the issues related to quality and offer logical solutions.

In this case, the Bharat Bijlee Construction Limited (BBCL) group, with a proven track record of over five decades in the transmission and distribution business in India, decided to venture into international projects, considering the prevailing stagnant domestic power sector. They secured contracts worth $85m from the “Shariket Karhaba Koudiet Eddraouch Spa,” a state-owned company responsible for power generation, transmission and distribution in Algeria. However, during the execution phase of these projects, BBCL encountered significant challenges related to product and service quality. These challenges arose due to the tight schedule constraints and cost considerations, as well as a lack of understanding of the dynamics involved in executing international projects, especially in the demanding conditions of the sub-Saharan desert. This case study addresses the complex issue of ensuring and maintaining high-quality standards in large-scale substation projects situated in the challenging environment of the sub-Saharan desert, highlighting the importance of effective project management and international project execution expertise. The case study is from quality management knowledge area and focuses on identification of root cause of quality noncompliance and for better decision-making in projects.

The teaching case is designed for undergraduate and postgraduate courses in project management, civil engineering and architecture domain. The participants will be able to understand the application of various quality tools, statistical process tools and control charts in problem identification, categorization, root cause identification and decision-making.

Teaching notes are available for educators only.

CSS2: Built environment

The case delves into the significant factors contributing to the steep decline of Sintex shares, examining both external and internal factors. Internally, the primary drivers were the expansion plan, the demerger decision, financial mismanagement and the delayed and inadequate integration of Information Technology (IT) into the business.

Sintex, a prominent private sector company listed in the Indian stock markets, operated in the textile and plastics sectors. However, in 2017, Sintex underwent a demerger into two separate entities: Sintex Industries Limited (SIL) and Sintex Plastics Technology Limited (SPTL). While SIL focused on textiles, SPTL dealt with plastics. However, soon after the demerger, the share prices of both companies began plummeting, leading to significant losses for investors. This case investigates the reasons behind this decline through a step-by-step analysis.

This case is suitable for postgraduate students pursuing an MBA, MMS and executive programs such as PGDBM and PGDM, with a specialization in business strategy. It is also beneficial for participants in management development programs (MDPs) designed for higher level executives. Additionally, the case can serve as training material for executives undergoing strategic role training within an organization. It is recommended to teach the case toward the end of the course, where the instructor can provide a summary of the previous classes’ teachings.

CCS7: Management Science

Upon completion of the case study, the students will be able to find the challenges and underlying structures that cause the problem; the students will be able to identify the dynamic variables and develop the interconnection and interlinkages among the time-delayed variables to build the story of the business case; the students could develop the block diagram and could build the system dynamics model using the simulation software STELLA, and if they do not have the simulation software, even then they could have a mental model to understand the problem well; the system dynamics students can design the policies to make the system better behaved and recommend solutions; and the students could make mind maps and develop the mental model and could recommend solutions and way forward to overcome the challenges and solve the issues.

Tradeasia is a small-scale manufacturing firm that had started its business activities near Sundar Industrial Estate, Raiwind, in September 2007. The company’s prime focus was to buy the potato starch from chips manufacturing companies and, then, extract the potato starch from the waste potato using its own machinery and sell it as a sizing agent to textile mills. Quality characteristics in terms of better millage and enhanced gullibility made it compatible with Rafhan corn-based starch. The major challenge linked to potato starch was its degree of wetness; the potato starch either extracted from rotten potato or procured from the potato chips manufacturing companies had a high degree of wetness and moisture content. Wet potato starch sometimes had more than 60% moisture content, which was really a challenge. Owing to the high degree of wetness, the wet starch was prone to fungus growth, and within hours, the fungus created toxins if it was not dried immediately, and then after 24 h, toxins acquired a black colour, and they became hardened like pebbles. The starch then was unusable even for sizing purposes for textile products. Reduction in the degree of wetness was really a big challenge and demanded prompt action and high productivity of the operational staff to make that product dry for sale purposes. This was the biggest challenge that ended up in huge inventories of wet starch. Capacity constraints and operational inefficiency killed the company’s productivity and affected the company’s profit.

This case study is written and developed for MBA and MS-level supply chain students of the system dynamics course or those studying management of supply chain complexities. This case study discusses the operational challenges while running the business; huge inventories, capacity constraints and inefficiency in production operations were the challenges associated with almost all manufacturing industries. This case study discussed not only why such challenges are appearing in the business but also the solution that resided in the wisdom shared by the employees in the board meeting. An integrated system dynamics model could be used to design the policies to overcome such challenges. Even the block diagram of the model and causal loop diagram could help to conceptualize the problem and explore the way forward.

Teaching notes are available for educators only.

CSS 7: Management science.

The case study will encourage reflection on the challenges that organisations face in attracting, engaging and retaining knowledge workers that are critical to their performance and growth. It is set in the context of innovative, high-tech organisations whose success is heavily dependent on the performance of information technology (IT) professionals, a specialised and heavily demanded workforce.

The case study depicts the struggle of Manoel Almeida, Descomplica’s chief technology officer, to reverse the scenario of demotivation and high turnover among IT employees and to attract new talent. The case study addresses the themes of knowledge worker attraction, engagement and retention, with a focus on IT professionals.

This case study is designed for undergraduate and graduate education programmes/courses.

Teaching notes are available for educators only.

CSS 7: Management science.

After completion of this case study, the students will be able to comprehend the importance of communication in managing change, examine the role of processes and systems in implementing change management initiatives at a large scale, assess the effectiveness of various strategies in mitigating resistance to change and recognise optimal strategies for communication processes and messages with respect to different audience and contexts.

This case study discusses decisions and strategies that led to Indore (a city in the state of Madhya Pradesh, India) becoming India’s cleanest city for the sixth time in a row. The case explores if the various strategies used by the commissioner of Indore Municipal Corporation would continue to succeed in mitigating resistance to change from the citizens of Indore or if the change management strategies needed to be revised. Amidst intensely rising competition from other cities, especially Surat (a city in the state of Gujarat, India), the case delves into the commissioner’s efforts to defend Indore’s claim of being India’s cleanest city for the sixth consecutive time.

This case study is suitable for use in executive modules and management development programs. It can be used for the following courses: ■ In change management course, this case study can cover critical aspects of strategies to mitigate resistance to change and bring about lasting behavioural changes in followers.■ In communication courses, this case study can cover key aspects of communicating the change vision of a leader to a large audience.

Teaching notes are available for educators only.

CSS 7: Management science

This case study covers different concepts related to leadership. It should help students analyze business situations from a leader’s perspective. By the end of this case study, students would be able to understand the role and the characteristics of leadership during a crisis using the 11 dimensions of character framework, map leadership personalities using the HEXACO model to understand the effectiveness of certain traits in crisis management and apply theories of change management using the Satir and Switch models, in addition to Kotter’s theory of change.

Elsewedy Electrometer Group (EMG) was owned and operated by Emad Zaki Elsewedy as the sole founder and chief executive officer (CEO). EMG was a leading company in the meters industry in Egypt. The time span of this case study covered the period from November 2011, when Elsewedy’s health was deteriorating, to his early retirement in September 2012, and his comeback, two years later, in September 2014. In November 2011, against the backdrop of Elsewedy’s deteriorating health and subsequent early retirement in September 2012, EMG faced several challenges in achieving its vision that hindered its business growth. These arose after Youssef Salah, the former export director of EMG, was appointed as the company CEO. In Elsewedy’s absence, EMG faced liquidity problems, as the banks demanded that it repay all its debts. At the same time, the business suffered severe losses owing to its inefficient operations. Elsewedy decided to return to EMG in September 2014 to find a solution and help the business recover to ensure its continuity and sustainability. After taking a holistic view of the crisis at hand, he was faced with a dilemma and several questions: Was the company leadership effective? Would a change in leadership be required? How could he lead effective change in light of the current crisis? How could he ensure that EMG did not end up in a similar predicament in the future? This case was designed to teach leadership in crisis and change management in the metering industry.

This case study is intended for graduate and undergraduate students studying a leadership or management course. It can help students comprehend the challenges that arise when a large business undergoes a management transition during a crisis. The case study also considers how leaders are shaped by crises. This case study can be considered as level 1 on a 1–3 scale, as the full description of the situation is given in the case study and the task of the students is to analyze the leader and his decisions using various academic concepts and theories (Erskin et al., 2003).

Teaching notes are available for educators only

CSS 7: Management science

The purpose of this study is to make students understand the logic behind and implications of the “Socio-Technical Imbrication Framework” that can help them understand the importance of aligning workforce motivation and capabilities with the modern technology deployed in the organization. Moreover, students will understand the essentiality and criticality of customer satisfaction for the organization.

The technical services operations team at Cotton Web Limited formerly relied on JS Node, e-coordination system, to address customer complaints. There were many bugs in that system as it did not carry along the complaint tracking protocol, was slow in response, fundamentally structured upon manual complaint record keeping that resulted in piling up un-resolved complaints for a longer period of time. The team under the leadership of Mr. Hasan Ali, a competent expert working as GM Research and Data Analytics, undertook detailed analysis of recurring glitches in this system and replaced it with a novel Web-based automated complaint management system at Cotton Web Limited. This entire diagnosis and intervention process took almost three months till completion. The case is written for use in courses in the curriculum of BBA, BBIS, BSIT and BSCS programs at undergraduate level. It is most suitable for the courses in leadership, change management, business process reengineering, soft engineering, team building and business communication.

The case is suitable for teaching at Undergraduate level to the students of BBIS, BBA, BSCS and BSIT students in the last year of their degree programs. Teaching faculty can use case-based methodology for student learning by putting them into a real-life situation faced by an organization and letting them think critically and identify following points for further discussion and clarity: individual or in groups; problem identification through discussion; the stakeholders involved in the company’s situation through presentation or one-pager presentation; case analysis with reaching best solution to prevailing issue at hand through group discussion; reaching a decision or solution with reasonable logic and justification through group discussions; and create further dilemma on the basis of questions unanswered within this case story.

Teaching notes are available for educators only.

CSS 7: Management Science.

The case has the following learning objectives:

1. understand the various types of comparisons that are possible between groups over time and across space;

2. evaluate a policy intervention using relevant data and different methods; and

3. understand the meaning of the phrase “controlling for other relevant factors” in regression and non-regression contexts.

The difference-in-differences (DID) approach is a useful tool for making meaningful comparisons. This case tries to provide a non-technical introduction to the approach using a basic comparison of crime rates among districts in Punjab (Pakistan's largest province). Being the most populous region of the country, Punjab faces many governance challenges, and street crime is one of them. (Exhibit 5 provides additional information about the geographical and administrative setting used in this case study.) In 2016, Chief Minister Shahbaz Sharif established the Dolphin (police) Force in different locations to improve urban patrolling and reduce street crime. There were debates about the effectiveness of the Dolphin Force (DF).

Those who are skeptical of DF point to various situations that were handled incorrectly by DF personnel, as well as other administrative and operational problems in the initiative. Optimists believe it is beneficial and want it to be expanded to other districts and regions. The threat of street crime claims many lives and, according to optimists, necessitates the formation of a special force. Whether the huge resources invested in the DF worth their lot or not can be known through sound statistical analysis that can identify the difference in the rate of crime because of the DF. In this instance, the case provides information to answer the following question:

Is there a significant difference in crime rates between areas where the DF is operating and districts where it has not yet been installed?

In quantitative/statistical analysis classes, the case can be used to teach the DID technique to MBA/MS Applied Statistics/Applied Data Analysis students. It can also be used in undergraduate Econometrics classes.

Teaching notes are available for educators only.

CSS 7: Management Science.

The learning outcomes are as follows: identify and evaluate the impact of risk factors for health-care organizations during crisis; evaluate the role of different organizational factors in building resilient health-care organizations; define organizational resilience in a health-care context; and apply the effect-strategy-impact resilience framework.

September 2022 found Ranjan Thakur, the Hospital Director at Manipal Hospital, Jaipur (MHJ) reflecting on MHJ’s resilience toward future health-care crises. MHJ was established in the capital city Jaipur of the Indian state of Rajasthan in 2014, as a 225-bed multispecialty unit of the nationally renowned Manipal Health Enterprises Ltd. As the Hospital Director, Thakur had been responsible for navigating his team and the hospital through the multiple health-care related challenges exacerbated by the multiple waves of the Covid-19 pandemic in a large Indian state with a sizable rural and semiurban population. Though Thakur and his team of doctors had worked through the vulnerabilities of their health-care ecosystem, mapping the risks and mitigating the same, Thakur asked himself if they had done enough. He wondered how a health-care institution such as theirs could sustain effective health-care delivery during future crises situations to deliver high-quality health care to the vulnerable communities. Had they effectively mapped MHJ’s vulnerabilities and built resilience into the hospital’s functioning? The backdrop of the case is public health in the state of Rajasthan (Jaipur), and the case is rich in detailing social factors such as behavior issues of patients, doctors and nurses; operational factors such as standardization of treatment and standard operating procedures, availability of resources, clinical concerns; leadership and management of the hospital through the pandemic. This case can be used by instructors to teach organizational resilience building in the health-care context.

Graduate- and executive-level courses in managing change during crisis in health-care context; health-care management/leadership.

Teaching notes are available for educators only.

CSS 7: Management Science.

The learning outcomes of this study are as follows:

1) illustrate the project management failures that contributed to the fire accident at Grenfell using a fishbone diagram;

2) identify and classify the power and influence of various stakeholders involved in a brownfield project using a relevant framework; and

3) elaborate the need for following effective stakeholder management processes and project leadership, especially in the context of a refurbishment/renovation project.

On 14th June 2017, the Grenfell Tower in North Kensington, West London, UK, caught fire. The fire raged for 60 h and around 72 people lost their lives. Many criticized the response of the London Fire Brigade (LFB) and their lack of preparedness to respond to such an emergency. There were calls for Dany Cotton, the Chief of LFB, to resign. However, there had been a major cladding-related refurbishment at Grenfell, and subsequent investigations revealed that the use of combustible materials, a lack of compliance with the fire-safety norms and a blatant disregard for resident safety had contributed to the fire. The tragedy was a cumulative outcome of failure on two counts: effective project management and stakeholder management during the process of refurbishment, especially in the context of a low-cost housing project. Given this situation, this case considers whether Dany Cotton should own up to her responsibility and resign from her position. In the process, the case considers Grenfell refurbishment from the theoretical lens of project management in the construction management scenario to understand the factors that could have led to an “avoidable” tragedy.

Postgraduate students of construction management; final year undergraduate engineering students who have a foundational course on project management; and architects.

Teaching notes are available for educators only.

CSS 2: Built environment.

• After working through the case and assignment questions, students will be able to do the following:• Identify the difference between core competencies and dynamic capabilities and how they make a difference in a crisis towards building an agile organisation.• Evaluate the support through a collaborative, temporary, trans-organisational system to local manufacturers to achieve agility and sustainability.• Realise the importance of clear expectations exchange and communication between partners to enhance collaboration, even in temporary structures in increasing agility and sustainability.

The COVID-19 pandemic and subsequent lockdowns created a crisis for South Africa and the President, Cyril Ramaphosa called for urgent collaboration between business, labour and government to meet the demand for locally produced Personal Protective Equipment (PPE) and medical devices. The case illustrates this response and collaboration between government, labour and business through a temporary newly formed structure, called Business for South Africa (B4SA). Ross Boyd, Head of the innovation work stream of B4SA which housed the local manufacturing partnership (LMP) was considering his dilemma of how to be agile in sustaining their support to the South African manufacturers even though the LMP was a temporary structure. The local manufacturers had to repurpose their production lines to produce local PPE and medical devices. How could the LMP support the South African manufacturers to sustain their agility in building capabilities during COVID-19? At the same time, Ahmed Dhai, the Group Executive of Operations of Kingsgate Clothing, which was benefiting from the support of the LMP, was reflecting on his leadership in taking decisions to repurpose production and increase capacity during COVID-19. Dhai was considering his dilemma of being agile during and beyond the COVID-19 pandemic. The case features several decisions taken by Kingsgate and offers students the opportunity to evaluate these decisions given the fluctuations in supply and demand of PPE and the leadership that Dhai demonstrated in how he communicated and dealt with his staff during the pandemic. Students could also give recommendations to Ross Boyd and Ahmed Dhai on how they could lead their organisations to be more agile during and beyond COVID-19.

The case study is suitable for MBA or MPhil level on Strategy courses. The case would also find good application in Organisational Behaviour and Leadership courses on Masters level and Executive Education programmes.

Teaching notes are available for educators only.

CSS 7: Management Science.

Upon completion of the case study discussion, successful students will be able to define and list the steps of time-driven activity-based costing system (TDABC); understand and explain the ideas behind the TDABC; implement the TDABC in customer profitability analysis; draw connections among the cost and profitability analysis; evaluate the importance of better costing techniques in profitability analysis; and make managerial decisions based on TDABC analysis.

Gluten Limited’s financial affairs and operations manager, Fatih, was aware that the company was making very little profit from its operations with its biggest customer. The main reason appeared to be that it delivered its products in bulk to the main warehouses of the customer, which then distributed them to the stores. Fatih believed that products were being sent to stores late, so that their expiration dates passed quickly and they ended up being returned.

The case study documents the past year of Gluten Limited’s delivery operations with one of its biggest customers. It focuses on the effectiveness of its delivery operations and ways to increase profitability by reducing sales returns. The case dilemma involves the choices that Fatih faced following a six-month trial period: either delivering products in bulk to the customer’s main warehouses at lower cost but higher return rates or delivering small amounts directly to stores at higher cost but lower return rates. Fatih needed to decide which mode of customer operations was more profitable and continue that way.

Knowing the importance of determining costs properly in profitability analysis, Fatih made the cost calculations using the TDABC system.

This case was written for use in Cost Accounting and Managerial Accounting classes at the undergraduate level. The focus of the case aligns well with discussions of customer profitability analysis, cost reductions, eliminating non-value-added activities, and profitability of operations. Instructors seeking to emphasize the most suitable costing methods for customer profitability analysis could assign this case.

Teaching notes are available for educators only.

CSS 7: Management Science

1. Probabilistic calculations of cost, and profit/loss using standard probability functions

2. Decision tree to find the expected monetary value (EMV) of different options.

3. Monte Carlo simulation for risk analysis.

4. Risk analysis in project management.

Learners will be able to understand and apply the following: how to approach uncertainty in business decisions using probabilistic calculations of cost, and profit/loss using standard probability functions; how to address uncertainty in business decisions by looking forward and reasoning backward, using the decision tree technique and the EMV of different decisions; how to analyse the risk inherent in business decisions by incorporating probability distributions for all critical variables in the form of Monte Carlo simulation; and appreciation of strategic considerations in risk analysis as it applies to project management

The case describes the challenge facing Vilas Birari, the owner and chief executive of Harsh Constructions, a construction company headquartered in Nasik, India. Birari had to decide on the bid for a construction project in September of 2021, during the COVID-19 (COVID) pandemic. Due to successive waves of the pandemic, the state and federal governments announced lockdowns intermittently, causing uncertainty in costs related to labor, material and project completion. The dilemma before Birari was how to set a bid price that was not so low as to incur a loss and not so high as to lose the bid to competitors. The uncertainty made Birari’s decision-making complex. The case invites students to help Birari find an optimum bid price by using various quantitative techniques, such as Monte Carlo simulation and decision trees.

This case is intended for students of management at a master’s level, in an elective course on management science, which is often also known as decision science. This compact case can be positioned in the second half of the course, when exploring risk management using computer simulation as a tool. The case serves both as an introduction to using simulation to manage uncertainty as well a contrast with simpler methods that are covered earlier in the course.

Teaching notes are available for educators only.

CSS 7: Management Science.

The learning outcomes of this study are as follows:

1. comprehending foundational dimensions of brand equity and criteria to compare the use of traditional and new media in leading brand communication appropriateness and performance;

2. understanding and evaluating implications of leading brand communications during times of crises; and

3. creating recommendations for leading brand communication preparedness and response to crises.

On 16 August 2020, Dr Barbara Jensen Vorster, Senior Executive Manager, Communications and Marketing of the Gautrain Management Agency (GMA), in Midrand South Africa, considered her dilemma of adapting their communication approach during COVID-19 and beyond the current crisis. The GMA relied on traditional media and the crisis created an opportunity to rethink their entire communications approach. It was important to the GMA communications team to keep the Gautrain commuters connected even though they might not be using the Gautrain during the lockdown of COVID-19. Jensen Vorster believed that a brand should be adaptive and continue even when a service is not running. Jensen Vorster had to lead her communications team when they were all working from home, and they had to keep commuters informed of the requirements during the different levels of lockdown in South Africa. Their various campaigns during this time purposefully communicated with commuters and the various “staying home” initiatives with the intention of lifting spirits. The communication outreach during the COVID-19 pandemic switched over to social media communications out of necessity; however, was that ideal communication during a crisis? While most of the case focuses on this external communication, the case pays attention to some internal communication initiatives by Jensen Vorster with her own team and for the Gautrain’s staff. The question is whether brands should shift from traditional media to new media campaigns during the 21st-century crises? Students will get the opportunity to compare the use of traditional and new media during crisis times. How might they approach their brand communications during COVID-19 and in preparation for future crises?

Marketing and Business Communications and Leadership courses for MBA or executive education programs.

Masters level MBA.

The team of authors conducted face-to-face interviews prior to and during the lockdown in South Africa; the interviews were conducted online through Zoom. Interviews included Dr Barbara Jensen Vorster, Senior Executive Manager, Communications and Marketing of the Gautrain Management Agency and Kesagee Nayager, the Marketing and Communications Executive Manager at Bombela Concession Company. Viwe Mgedzi, Executive Manager for Knowledge Management, provided documents supporting the case. The researchers also conducted desktop research of secondary data, including media and press articles on the companies. The @Gautrain Twitter feed was very important for the researchers to investigate as part of the secondary data research, to triangulate the interview data.

For example, see one of the Twitter feeds on 17 March 2020, 5:37 pm.

The following Twitter feed on the Gautrain’s status confirmed the interview data: https://twitter.com/TheGautrain/status/1239938937885466633

The main resources of this case study were the interviews and the media articles to offer objective references. The authors used the following two newspaper articles to triangulate the information they gained from the interviews:

BusinessTech, March 18, 2020, accessed March 8, 2021 at https://businesstech.co.za/news/lifestyle/382707/south-african-coronavirus-cases-jumps-to-116-as-a-gautrain-exec-tests-positive/

Timeslive, www.timeslive.co.za/news/south-africa/2020-03-17-staff-in-self-isolation-after-executive-tests-positive-two-gautrain-stations-chemically-decontaminated/

Teaching notes are available for educators only.

CSS 7: Management science; CSS 8: Marketing.

At the end of the case students will be able to:

1. Relate risk as one of the 12 principles in project management contemplated in the international standards of the PMBOK Seventh Edition guide.

2. Determine high-level risks by articulating the WBS and RBS of a construction project.

3. Perform a qualitative and quantitative analysis of the probability and impact of risks through the heat map tool and the Expected Monetary Value (EMV) technique.

4. Propose the different response strategies contemplated in the risk management through the formulation of a response and contingency plan.

MORESA S.A.S was a family company founded in 1994, whose value proposition focused on construction and permanent advice for the execution of innovative and contemporary projects with more than 27 years of experience in the city of San José de Cucuta, department of Norte de Santander, Colombia. The objective of the case is to Relate risk as one of the 12 principles in project management contemplated in the international standards of the PMBOK Seventh Edition guide; Determine high-level risks by articulating the WBS and RBS of a construction project; Perform a qualitative and quantitative analysis of the probability and impact of risks through the heat map tool and the Expected Monetary Value (EMV) technique and propose the different response strategies contemplated in the risk management through the formulation of a response and contingency plan. The teaching case is designed for academic programs in areas of knowledge of civil engineering, architecture and at postgraduate level such as: Master’s in civil engineering, Master’s in risk management, Master in project management or MBA. For this case, an expert judgment was developed with professionals belonging to different areas of knowledge. Likewise, secondary information was collected from the organization's strategic documents and the analogous estimation through the historical records of the project portfolio developed by the construction company. Finally, the case, classified in the Built Environment, a challenge that project managers must face in VUCA environment through risk management.

The teaching case is designed for academic programs in areas of knowledge of civil engineering, architecture and at postgraduate level such as: Master’s in civil engineering, Master’s in risk management, Master’s in project management or MBA. In the modules of risk management, project management, international standards, the case guides the applicability of methods and artifacts used in risk management considering the process identification, quantitative, qualitative analysis, and development of response strategies and contingency plans.

Teaching notes are available for educators only.

CSS 2: Built Environment.