Case studies

After completion of the case study, the students will be able to appraise the importance of different methods of location planning in warehouse selection, analyze the load distance values for warehouse location and choose the optimum location based on the load distance analysis.

DB Builders, a prominent Indian construction company, faced a crucial decision in selecting an ideal storage warehouse for a project involving 100 flats spread across five locations. Mr Vijay Kumar, an experienced material handling expert, was entrusted with this task as part of transitioning the company’s material allocation system toward centralization. Using practical travel distances, Kumar meticulously scouted four potential warehouse locations. The selection process hinged on three primary factors: load, distance to apartment sites, safety and cost of the premises, each carrying specific weightage. The project planning department provided scores for safety and cost, helping evaluate the options. This unique challenge arises due to varying material requirements across the apartment locations, demanding an efficient warehouse planning. The selection of the optimal storage warehouse holds paramount importance in facilitating the smooth execution of these larger projects. Kumar’s expertise and strategic decision-making are pivotal in ensuring a seamless transition toward centralized material handling, which is essential for the company’s future success.

This teaching activity is aimed at introductory/basic courses in Bachelors and Masters of Business administration.

Teaching notes are available for educators only.

CSS 9: Operations and Logistics.

After completion of the case study, the participants will be able to understand the significance of quality as a pivotal domain within project management and to analyze the issues related to quality and offer logical solutions.

In this case, the Bharat Bijlee Construction Limited (BBCL) group, with a proven track record of over five decades in the transmission and distribution business in India, decided to venture into international projects, considering the prevailing stagnant domestic power sector. They secured contracts worth $85m from the “Shariket Karhaba Koudiet Eddraouch Spa,” a state-owned company responsible for power generation, transmission and distribution in Algeria. However, during the execution phase of these projects, BBCL encountered significant challenges related to product and service quality. These challenges arose due to the tight schedule constraints and cost considerations, as well as a lack of understanding of the dynamics involved in executing international projects, especially in the demanding conditions of the sub-Saharan desert. This case study addresses the complex issue of ensuring and maintaining high-quality standards in large-scale substation projects situated in the challenging environment of the sub-Saharan desert, highlighting the importance of effective project management and international project execution expertise. The case study is from quality management knowledge area and focuses on identification of root cause of quality noncompliance and for better decision-making in projects.

The teaching case is designed for undergraduate and postgraduate courses in project management, civil engineering and architecture domain. The participants will be able to understand the application of various quality tools, statistical process tools and control charts in problem identification, categorization, root cause identification and decision-making.

Teaching notes are available for educators only.

CSS2: Built environment

After completion of the case study, students will be able to learn, understand, examine and customize leadership styles per organizational culture; understand the conflict management styles of a female leader; and comprehend the organizational change process to devise an effective communication strategy.

Ever-changing business demands managers adopt organizational change in leadership styles, business processes, updated skill sets and minds. One must be ready to understand influential nurtured corporate culture and human resource resistance towards the inevitable change. This case study attempted to discuss the female protagonist dealing with an organizational conflict. The case study introduces one such protagonist from a century-old woman’s educational institution. Subsequently, this case study presents organizational change under the leadership of a female protagonist. This teaching case study gives the reader an insight into situational leadership, conflict management styles and the corporate change process by implementing an appropriate communication strategy. This case study describes the change process through the various decision-making scenarios that an academic institute over a century old faced during the post-pandemic crisis after adding a crucial protagonist. The employee union, followed by students and administrative employees, has challenged the dominating leadership position held by the college principal. Protests occurred due to the college administrator’s refusal to adjust her approach to leadership. This teaching case then provided different leadership styles of the current and old leaders. Finally, the case study lists the challenges a leader faces during turbulent times and the lessons a leader should learn from such situations while transforming the institute.

The teaching case benefits undergraduate students in business management subjects such as conflict management, leadership and organizational behaviour. Nevertheless, trainers can use this case study to teach seasoned managers and emerging leaders the significance of adopting and implementing change while understanding situational leadership.

Teaching notes are available for educators only.

CSS 10: Public Sector Management.

The case delves into the significant factors contributing to the steep decline of Sintex shares, examining both external and internal factors. Internally, the primary drivers were the expansion plan, the demerger decision, financial mismanagement and the delayed and inadequate integration of Information Technology (IT) into the business.

Sintex, a prominent private sector company listed in the Indian stock markets, operated in the textile and plastics sectors. However, in 2017, Sintex underwent a demerger into two separate entities: Sintex Industries Limited (SIL) and Sintex Plastics Technology Limited (SPTL). While SIL focused on textiles, SPTL dealt with plastics. However, soon after the demerger, the share prices of both companies began plummeting, leading to significant losses for investors. This case investigates the reasons behind this decline through a step-by-step analysis.

This case is suitable for postgraduate students pursuing an MBA, MMS and executive programs such as PGDBM and PGDM, with a specialization in business strategy. It is also beneficial for participants in management development programs (MDPs) designed for higher level executives. Additionally, the case can serve as training material for executives undergoing strategic role training within an organization. It is recommended to teach the case toward the end of the course, where the instructor can provide a summary of the previous classes’ teachings.

CCS7: Management Science

Upon completion of the case study, the students will be able to find the challenges and underlying structures that cause the problem; the students will be able to identify the dynamic variables and develop the interconnection and interlinkages among the time-delayed variables to build the story of the business case; the students could develop the block diagram and could build the system dynamics model using the simulation software STELLA, and if they do not have the simulation software, even then they could have a mental model to understand the problem well; the system dynamics students can design the policies to make the system better behaved and recommend solutions; and the students could make mind maps and develop the mental model and could recommend solutions and way forward to overcome the challenges and solve the issues.

Tradeasia is a small-scale manufacturing firm that had started its business activities near Sundar Industrial Estate, Raiwind, in September 2007. The company’s prime focus was to buy the potato starch from chips manufacturing companies and, then, extract the potato starch from the waste potato using its own machinery and sell it as a sizing agent to textile mills. Quality characteristics in terms of better millage and enhanced gullibility made it compatible with Rafhan corn-based starch. The major challenge linked to potato starch was its degree of wetness; the potato starch either extracted from rotten potato or procured from the potato chips manufacturing companies had a high degree of wetness and moisture content. Wet potato starch sometimes had more than 60% moisture content, which was really a challenge. Owing to the high degree of wetness, the wet starch was prone to fungus growth, and within hours, the fungus created toxins if it was not dried immediately, and then after 24 h, toxins acquired a black colour, and they became hardened like pebbles. The starch then was unusable even for sizing purposes for textile products. Reduction in the degree of wetness was really a big challenge and demanded prompt action and high productivity of the operational staff to make that product dry for sale purposes. This was the biggest challenge that ended up in huge inventories of wet starch. Capacity constraints and operational inefficiency killed the company’s productivity and affected the company’s profit.

This case study is written and developed for MBA and MS-level supply chain students of the system dynamics course or those studying management of supply chain complexities. This case study discusses the operational challenges while running the business; huge inventories, capacity constraints and inefficiency in production operations were the challenges associated with almost all manufacturing industries. This case study discussed not only why such challenges are appearing in the business but also the solution that resided in the wisdom shared by the employees in the board meeting. An integrated system dynamics model could be used to design the policies to overcome such challenges. Even the block diagram of the model and causal loop diagram could help to conceptualize the problem and explore the way forward.

Teaching notes are available for educators only.

CSS 7: Management science.

After completion of the case study, students will be able to understand the concept of clustering and identify clusters for improving capacity utilization, analyse transport routes to optimize logistics resources, analyse the impact of a full truckload on resource optimization, evaluate unused capacity and ascertain the impact of reverse milk run to reduce the same and apply clustering and reverse milk run to optimize the logistics resources.

The case study is about a freight forwarding company that offered end-to-end logistics solutions for the exporters based in India. Within a short time span, the company became one of the sought-after service providers for its clients. However, when the company planned to expand its business by expanding its client base, the efficiencies reduced and hurt the profitability of the company. It was all excellent with the limited number of clients, but as the number of distantly located clients surged, the operating costs increased. Trucks were running with partial loads, thus reducing efficiency. The rate of increase in cost surpassed the rate of revenue every time. The cost per mile of transportation was on the rise. The surging fuel prices were adding to the heat. In spite of being one of the first choices for clients, the company could not generate good profit margins. If they chose to increase prices, the company would have lost customers to the cheaper unorganized players in the market. It was time to choose between growth and survival. The company could not sustain itself without devising a mechanism to reduce costs. The company would not have sustained itself without devising a mechanism to reduce costs. To sustain in the business, the company had to device a mechanism to reduce costs. Whether to continue operating the conventional way or to transform? Was there a logistics strategy that would have improved transportation efficiency and reduced the costs for the company?

The case study is suitable for teaching post-graduate management courses in operations and logistics, supply chain management and supply chain analytics, as well as entrepreneurship-related courses.

Teaching notes are available for educators only.

CCS 9: Operations and logistics.

Upon completion of this case study, students are expected to be able to reflect on strategic industry sectors and the formulation of long-view public policies; understand some of the main biases that affect making decisions in environments of high uncertainty; and build and apply judgment models to support decision-making processes.

Motivated by recent international events responsible for causing supply shock and great volatility in the price of imported fertilizers, Brazil, which in 2022 was responsible for producing only 15% of all the fertilizer consumed by its agribusiness, ran against time by launching a new national fertilizer plan (PNF). The plan proposed to boost Brazil’s national fertilizer industry to fulfil a long-term vision of reducing the country’s external dependence by 2050. While awaiting the first results of the PNF, this case study casts the student participants in the role of Breno Castelães, chief advisor of the special secretariat for strategic affairs of the presidency of the republic, whose role is to recommend the country’s position in the face of external pressures to adopt international embargoes of Russian fertilizers because of its war with Ukraine.

This case study is suitable for undergraduate and graduate students of business administration and public management courses who want to deal with topics such as public policy, judgment and decision-making.

Teaching notes are available for educators only.

CSS 10: Public sector management.

The learning outcomes of this case study are to understand the business model canvas and value propositions and apply advanced business innovation tools in electric vehicle business models; evaluate the current cargo vehicle scenarios at national and global levels and draw out the possibilities and costs for a new player; extrapolate the future scenario of the cargo economy, its electrification and positioning in a business-to-business (B2B) and business-to-customer (B2C) segment, especially for a developing economy; and improve the student’s ability to get organisational buy-in and execute new business models.

LoadExx is a fully electrified electric cargo service focusing on logistics in Kolkata, a metropolitan city in the eastern part of the country. The service of LoadExx commenced in January 2021 in the B2B segment after overcoming its then issues of driver hesitancy and customer anxiety and financial issues to adopt electrified cargo systems. The conundrum faced by LoadExx in its commencement thus had been solved under the able guidance of its owner Amit Arora. The case study was positioned four months after the commencement of LoadExx. To gain market power and traction, Arora and his team came up with the idea of market expansion. However, the current conundrum was whether LoadExx would enter the B2C segment in its current location or expand with the same business model to other parts of the country. The expansion was to be implemented in the immediate future to retain its rarity and reduce the imitability of the business model of LoadExx. This case study details the logistics and market operations of the cargo sector, especially electric cargo, in a developing economy, especially India. A teaching note supplementing the “Cracking the conundrum of e-cargo logistics: curious case of LoadExx” case study has been provided.

This case study is designed for undergraduate and postgraduate students and senior management professionals in executive education programmes undertaking courses in logistics management and supply chain operations and related cargo logistics courses. This case study denotes integrating key processes from end-users and gaining the trust of drivers, thereby showing the perspective of the plight and conundrums of a cargo aggregator working in the B2C segment. This case study could be used to discuss concepts related to not-for-profit firms, aggregators, policymakers and think tanks.

Teaching notes are available for educators only.

CSS 9: Operations and logistics.

The case study will encourage reflection on the challenges that organisations face in attracting, engaging and retaining knowledge workers that are critical to their performance and growth. It is set in the context of innovative, high-tech organisations whose success is heavily dependent on the performance of information technology (IT) professionals, a specialised and heavily demanded workforce.

The case study depicts the struggle of Manoel Almeida, Descomplica’s chief technology officer, to reverse the scenario of demotivation and high turnover among IT employees and to attract new talent. The case study addresses the themes of knowledge worker attraction, engagement and retention, with a focus on IT professionals.

This case study is designed for undergraduate and graduate education programmes/courses.

Teaching notes are available for educators only.

CSS 7: Management science.

This case study would help students in understanding the dynamics of logistics and logistics vendor roles and contributions to overall business operations. The case study covers real-time information for applying the theoretical knowledge students gain related to the selection of logistics vendor. It would help students to understand and evaluate the dynamics of a new start-up related to cost, profits and dependency; understand and analyze the importance of third-party logistics (3PL) service providers in the supply chain; become aware of the key performance indicators (KPIs) important in the selection of logistics vendor; and develop and create measures for selecting logistics vendors on the basis of KPIs.

This case study was about an innovative start-up operating in the field of organic edible oils. The company catered to end consumers with its indigenous technology and processes. The innovative and healthy products were appreciated by the consumers, as was reflected in the surging demand figures. With the increasing popularity of organic products, the orders were surging. At the same time, issues such as damaged product delivery, increased cost per delivery of small packages and failure to deliver because of unserved pin codes by their logistics partners were being faced by the company. The case discusses the dilemma faced by the protagonist regarding the selection of the right 3PL partner. The case study is suitable for teaching courses in operations and logistics, supply chain management and entrepreneurship-related courses.

This case study is appropriate for postgraduate courses in entrepreneurship, operations management, logistics and supply chain management and general management.

Teaching notes are available for educators only.

CSS9: Operations and logistics.