Case studies

The learning outcomes are as follows: to analyse the issue(s) presented within specific case study context (C4); to formulate solutions to identified issue(s) within specific case study context (C5); and to synthesise a group plan to solve issue(s) within specific case study context (A4).

In 2017, China proclaimed that it would no longer accept plastic waste for recycling, this was in-line with China’s Operation “National Sword” to review the quality of these plastic imports to ensure their recyclability. This sent shock waves through a now globalised recycling network, with China previously having imported 95% of the EUs and 70% of US plastics that had been collected for recycling. This plastic backlog was then diverted to South-East Asian nations, particularly Malaysia, which this case focuses the discussion upon. While the potential for significant economic benefits drew the attention of illegitimate and unscrupulous businessmen alike, the environmental degradation from the often, low technological recycling processes and even burning of low-grade plastics brought profound negative impacts. This case focuses upon, then Minister, Yeo Bee Yin who led the Ministry of Energy, Science, Technology, Environment and Climate Change, in which she took an active and aggressive stance in attempt to stop Malaysia becoming the dumping ground for the global plastic crisis.

This case is appropriate for final year undergraduate and any postgraduate degrees in Business.

Teaching notes are available for educators only.

CSS 4: Environmental Management.

After completion of the case study, the students will be able to discuss how social entrepreneurs identify problems and convert them into opportunities, analyze the challenges faced by social entrepreneurs in setting up and growing a new venture and formulate an expansion strategy for a startup.

Over 2.6 billion people worldwide needed access to sanitation services, and most of them stayed in rural areas. Lack of access to sanitation had several negative consequences. In the Middle East North Africa (MENA) region, sanitation was one of the major challenges, with 66 million people still lacking basic sanitation facilities. Additionally, a very small proportion of the wastewater was properly treated. This lack of access to sanitation was a major barrier to economic development and poverty reduction. Out of the 17 most water-stressed countries in the world, 11 were in the MENA region. About 15 million people in rural Morocco did not have a proper and sustainable sanitation system. However, there was an enormous opportunity to use wastewater as a resource. The global market for wastewater treatment services was valued at US$53bn in 2021, and it was expected to grow to more than US$71bn by 2026. Two Moroccan scientists – Dr Salma Bougarrani and Dr Lahbib Latrach, who were born and brought up in Morocco and had seen the wastewater problem very closely, decided to help the people at the bottom of pyramid (BoP) after completing their PhD in environment and water treatment technologies and multisoil-layering technology. They founded GREEN WATECH, a social enterprise, in 2018, which provided a low-cost, efficient and practical solution for wastewater management in the rural areas of Morocco. GREEN WATECH won many awards and cash prizes for its product and business plan. The company had already reached five regions of Morocco and positively impacted the lives of thousands of Moroccans. The founders were planning to expand to areas in the rest of Morocco and other African and Middle East countries. GREEN WATECH had the potential to significantly impact the lives of people in rural areas and help improve wastewater management systems in developing countries through its patented technology. However, the founders faced several challenges in making their dream a reality. They needed a bigger team to expand to different locations and countries but were finding it difficult to get the right people. They also needed funds to expand their geographical reach but found it tough to get investors as they were still unable to break even. It remained to be seen how the founders of GREEN WATECH would achieve their expansion goals and help people at the BoP in other developing countries.

This case study is suited to the Master of Business Administration/Master of Science and executive program.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

By the end of this case study analysis, students are expected to understand the dynamics of global markets by identifying institutional voids in prospective export destinations using the framework by Khanna and Palepu; evaluate potential export destinations for Nablus Soap Company (NSC), taking into account the identified institutional voids and their implications for market entry.

Formulate strategies for NSC to address institutional voids and manage exports effectively to the selected country.

Assess various global expansion strategies beyond exporting for NSC, examining their respective advantages, disadvantages, and feasibility within the context of the company’s goals.

Analyze the factors that contributed to NSC’s successful expansion into 72 countries, despite the longstanding challenges faced by Palestinians since 1948, including the recent impact of the 2023 situation in Gaza on the West Bank.

This case study provides students with an in-depth understanding of the Palestinian economy, focusing on the NSC, a small and medium enterprise in the olive soap industry. Founded by Mojtaba Tbeleh in 1971, NSC’s legacy spans 400 years. It is known for crafting handmade, 100% natural soap with olive oil as a key ingredient. As of November 2023, NSC has successfully expanded its exports to more than 72 countries. Despite this achievement, the company faces significant challenges due to various restrictions, particularly those imposed by occupying forces. The case study provides insights into NSC’s international expansion challenges, guiding students in understanding how institutional voids in potential expansion destinations impact market entry decisions. It encourages them to identify these voids select appropriate markets and formulate strategies to leverage NSC’s global expansion potential.

This case study is suitable for undergraduate- or postgraduate-level students.

Teaching notes are available for educators only.

CSS 5: International business.

The learning outcomes are as follows: determine the conditions founders encounter when their company is not on the right track; examine the importance of ethics in entrepreneurship; draw up a broad framework to understand the degree of trouble an organization is in and how far it has gone since the early warning signs of trouble; and formulate a comprehensive solution for entrepreneurial founders to extricate their ventures from a crisis.

India-based Edtech company Byju’s was facing a slew of challenges as of mid-2023. Its founder and CEO Byju Raveendran needed to steer the company out of trouble.

Post Graduate/Executive Education.

Teaching notes are available for educators only.

CSS3: Entrepreneurship.

After completion of the case study, students will be able to discuss the characteristics of sustainable enterprises driving the innovation; analyze the concept of waste to wealth, along with its associated benefits and challenges; provide an example of a sustainable start-up that operates conventionally and is attempting to increase production capacity through automation; and describe the strategies for scaling up the business.

Mr Manigandan Kumarappan’s goal was to provide the world with alternatives to plastic and other nonbiodegradable articles used in homes, offices, hotels and other places which compelled him to leave his corporate life behind and become an entrepreneur. His knowledge, expertise and creativity made him work toward providing a sustainable solution to the plastic-free world which made him create leafy straws for the world. His start-up Evalogia made 10,000 straws a day, mostly with manual production and machine-assisted in part of the processes. Evalogia got orders from all over the world after the ban on plastic from many countries. However, Evalogia was unable to meet the demand, as the manufacturing process mostly depended on manual production at present. Hence, the company planned to scale up its production capacity from 10,000 straws per day to 100,000 straws to meet the demand through automation or by increasing the production units to meet the growing demand from domestic and international markets. Kumarappan wondered if increasing the number of manufacturing facilities would make it harder to hire new staff, manage existing ones, train them and provide overall supervision; if these tasks were not completed well, the product’s quality and, subsequently, its demand, might suffer. The automation process required huge investment, time and a great deal of skepticism for its success. Kumarappan was stuck over whether to add more production units or automate the process to increase production.

This case study is suitable for graduate students.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

Following a discussion of the case, students should be able to analyse competitive dynamics: provide an in-depth critical analysis of Ilco Farming’s microenvironment, using the structure–conduct–performance framework; evaluate strategic positioning: conduct a SWOT analysis of Ilco Farming’s medicinal cannabis business; and develop strategic approaches: propose actionable strategies that would provide effective solutions to the problem of constrained market conditions currently faced by Ilco Farming.

Coenie and Ilse Venter established Ilco Farming, a cannabis farm located in the Viljoenskroon district in the Free State province in South Africa, in 2021. From the beginning, they poured their hearts and souls into their new venture, which soon paid off. A few short months after Ilco Farming began operating, despite the presence of other large competitors, Ilco Farming supplied a large share of the domestic medicinal market with flower heads. But then an unexpected challenge presented itself. In March 2023, Ilco Farming was operating at only 23% (600 m²) of its production capacity of 2600 m² and had considerable room for growth, the local market – at least the local legal market – for cannabis began to show signs of saturation. Coenie and Ilsa found themselves at the proverbial crossroads, grappling with the crucial decision of how to secure their farm’s future in the face of a fast-saturating local (legal) cannabis market and a thriving (illegal) black market. Coenie and Ilse refused to entertain the idea of going the black market route, as they were unwilling to risk losing their operating licence. They calculated that the farm would reach breakeven point within the next two years, with profits unlikely during this period. Should they persist with their current strategy of producing high-quality products and delivering a superior service in the hopes of growing their market share? Or should they consider other strategic options? Coenie and Ilse were sitting at their boardroom table having a cup of coffee and looking out of the window at Ilco Farming’s impressive SAHPRA- and GAP-approved warehouse and tunnels. “What should we do?” they both wondered.

The case study can be used in postgraduate courses in microeconomics (PGDIP/MBA) and agricultural economics (PGDIP/MBA).

Teaching notes are available for educators only.

CSS 5: International business.

This case study is tailored for audiences engaged in subjects such as entrepreneurship, strategy and foundational marketing principles. The academic focus aligns with the business model conceptualized by Osterwalder and Pigneur. This case study targets both undergraduate and graduate students at the university level, catering to interdisciplinary groups enrolled in courses related to entrepreneurship, strategy, marketing fundamentals and more. The objective is to equip students with the skills to construct diverse business models based on various potential alternatives. This case’s adaptable design and straightforward cost and revenue formulation facilitate comprehension for nonbusiness students, enabling them to grasp the multifaceted dimensions of a business model and project figures using basic arithmetic.

Fookifun emerged as a company born from Mrs Alejandra Padilla’s insightful grasp of the market. With the initial investment from her husband, she initiated a venture focused on delivering high-quality theatrical performances for children in the city of Barranquilla, situated in the northern region of Colombia. This narrative unfolds through early scenarios, illustrating the strategic decisions made by the entrepreneurs and the meticulous calculation of their costs and expenses. Alejandra steered her enterprise from 2014 to 2017, navigating through various alternatives and their associated costs. The narrative delved into 2017, depicting Alejandra’s pivotal decision-making process. Faced with the challenge of insufficient profitability, she contemplated the sustainability of the business. This period prompted her to reassess whether to persist with modifications or relinquish the venture altogether. The crux of Alejandra’s dilemma laid in the business’s meager profitability, which failed to generate adequate income for sustainability. It became imperative for her to make informed decisions, identifying modifiable variables within the business model and assessing their potential impact, particularly on the income generation model. This case study is tailored for audiences engaged in subjects such as entrepreneurship, strategy and foundational marketing principles. The academic focus aligns with the business model conceptualized by Osterwalder and Pigneur.

Given the characteristics of this case, it can be used for the teaching and learning of business or business administration, marketing, economics or related students, at higher or postgraduate levels (graduate school).

Teaching notes are available for educators only.

CSS3: Entrepreneurship.

After completion of the case study, the students will be able to make strategic decisions for social entrepreneurship and carry out a sustainability and social impact analysis, assess the benefits of a circular economy-based retail model and investigate ways to preserve these benefits and recognize the ethical and sustainable issues facing the fast fashion sector and how social enterprises are addressing them.

The culture of fast fashion had proven to be dangerous for the environment as it had promoted a culture of consumerism and materialism. It had also increased the landfills in different countries. The need of the hour was to upcycle used and unwanted clothes into new innovative items. This idea had been practically implemented by Mrs Sujata Chatterjee of the Twirl Store, the protagonist of this case study. Chatterjee was a social entrepreneur who recognized the environmental and social problems caused by rapid fashion and abandoned apparel in landfills. She launched the Twirl Store, a social enterprise with the mission of advancing circular economy and sustainability practices in the textile sector. Rural women were economically and culturally empowered by the enterprise’s upcycling of used clothing using their abilities, and a sustainable source of income was created. Finding abandoned clothing, sorting and processing it effectively and locating clients who share her commitment to sustainability were difficult tasks for Chatterjee. Despite the difficulties, the Twirl Store served as an example of how circular economy concepts, cultural sustainability and women’s empowerment might be combined, highlighting the importance of social entrepreneurship in addressing global concerns and fostering positive social effects and economic impact.

This case study is applicable for undergraduate as well as post graduate students of management studies.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

After completion of the case study, students will be able to analyse the path of the entrepreneurship from idea generation to market development to scaling up business, examine the impact of start-ups like Ergos on India’s agriculture value chain, discuss the challenges faced by tech entrepreneurs in growing a business, identify problems solved by Grain Bank Model and evaluate digitisation of farming’s custodial services such as warehousing, market linkages and loans.

The case study discusses how founders of Ergos, India-based leading digital AgriTech start-up, Kishor Kumar Jha and Praveen Kumar, started one of the unique models in the AgriTech landscape in India. After noticing the grim condition of small and marginal farmers in Bihar, India. Kishor and Praveen decided to put their banking and corporate experience to use in the farming sector. Ergos aimed to empower farmers by providing them with a choice on when, how much quantity, and at what price they should sell their farm produce, thus maximising their income. As a result, Ergos launched the grain bank model, which provided farmers with doorstep access of end-to-end post-harvest supply chain solutions by leveraging a robust technology platform to ensure seamless service delivery. Ergos faced many challenges in its journey related to financing, marketing and distribution. Amidst these developments, it remained to be seen how Kishor and Praveen would be able to realise their goal to serve over two million farmers across India by 2025 and create a sustainable income for them through its GrainBank Platform.

This case study was written for use in teaching graduate and postgraduate management courses in entrepreneurship and business strategy.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship

After completion of the case study, students will be able to identify the traits required in child leadership and the ability to apply “The Whole Leadership Framework” child leadership model today, identify and discover opportunities to promote child leadership and analyse its sustainable impact and analyse how innovation clubbed with sustainability will create a competitive advantage with special reference to the innovative ultraviolet-C light sterilisation Suraksha Box.

Aditya Pachpande was a child prodigy of India, who had stunned the world with his trailblazing attitude ever since the tender age of 12. Aditya’s father, Sandeep Pachpande, a Harvard alumnus, wondered – “My son is ahead of his time. Would institutions ever acknowledge my innovative boy as a child leader? Will my child become a teen chief executive officer (CEO)? Will he ever get accepted?” Aditya leads by example as a student, changemaker, edupreneur, innovator and keynote speaker. He thinks, “Age is just a number”, but has had to shout out loud to be heard. With the nickname “Lecture man” given by his teachers and peers, he went on to contribute in endorsing skill-based experiential and discovery-based teaching-learning that addresses real-world issues and sustainable development goals. A CEO at the age of 11 years, he co-founded NextGenInnov8 Global Solutions Private Limited and NextGenInnov8 Social Foundation. Although achieving these milestones, he had to manoeuvre through several curve balls hurled at him by the system. Not the one to ever compromise on ethics, values and purpose, today he was at the crossroads – whether he should choose social change over-commercialisation of his business, simplicity and minimalism over product perfection, crowdfunding over loans or angel investors, manufacture in China or make in India just to name a few. The unstoppable Aditya, aspiring for acceptance, dreamt that someday, these policymakers and businesses would acknowledge child innovators and not write them off just because they were adolescents. Aditya, standing on a precipice, dreamt along.

This case has been particularly focused on postgraduate-early stage-level students pursuing business or entrepreneurial education-related programs.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.