Case studies

This case study introduces some elements of strategic management process that instils competitive advantage on an entity such as a higher educational institute (HEI). It endeavours to achieve the following goals: comprehend strategy implementation through the sustainability paradigm; demonstrate the concept of cost-benefit analysis in strategy; analyse the challenges to new product adoption; and deliberate on extension of the project to include newer areas for greening. Thus, students would be taught about strategy implementation through the sustainability paradigm: they would be introduced to the concept of cost-benefit analysis through an application of the concept in strategic decision-making; students would be taught the about the challenges in new product (such as greening equipment) adoption; and they would be guided to deliberate on the extension of the project in newer areas of greening.

Prof Atmanand, as the Director of MDI Murshidabad (MDIM), was combating the challenge of leading the campus of the fledgling institute in its initial years. It was May 2023. MDIM was a business school in West Bengal, India. Atmanand had formulated a strategy of “greening” of the campus using a solar lighting system and organic waste converter to start off. The first steps were initiated in early 2021. The possible gains from this move needed to be weighed against the possible costs. Possible benefits included reductions in electricity expenditure, easier conformation to contemporary waste disposal norms, better scores in HEI-ranking exercises and increase in brand value of MDIM. The principal costs were: capital expenditure, possible higher payback period and challenge in adoption of sustainability products such as organic waste converter. The case study engages the student to learn about competitive strategy design and implementation in an HEI, and the resulting challenges. The case study can consequently be used in a Master’s level course in strategic management (competitive strategy) in the context of sustainability management, or as a case in the elective sustainability management offered to the senior batch in the MBA curriculum. The case study weighs out the benefits of the “greening” programme at MDIM against its possible costs. The possible benefits were manifold: reduction in electricity bills, easier conformance to contemporary waste disposal norms and higher scores at HEI-ranking exercises, both at the national and the international levels. Some benefits were not so quantifiable, such as better “press”, and consequent increase in brand value of MDIM. Weighted against these were the costs, capital expenditure, possible higher payback period and lack of in-house operational expertise (such as mechanics). The decision is not easy; although there are numerical tools (indicated in the case), they must be supplemented with a holistic understanding of the context, and any decision to be taken would require a combination of qualitative understanding along with numerical indicators. The case also exhorts the reader to understand problems in adoption of sustainability products and attempts to look to the future in terms of managerial initiatives.

This case study is suitable for postgraduate level (MBA) and executive programmes.

Teaching notes are available for educators only.

CSS4: Environmental Management.

Learning Objective 1: Develop students’ ability to critically assess and probe the challenges of aligning business objectives with compliance to local and international environmental regulations. Students will learn to identify how tensions between regulatory compliance and business goals influence decision-making processes in resource-intensive industries.

Learning Objective 2: Increase problem-solving skills of students by exploring the trade-offs between economic growth and environmental stewardship. They will be able to examine real-world dilemmas, such as community displacement, biodiversity loss, and pollution in mining contexts, and understand how to navigate these complex challenges using insights from Dr Nick’s experiences.

Learning Objective 3: Advance integrative learning, inquiry and interpretive capabilities of students by demonstrating the significance of ESG principles in mining operations focusing on environmental management, community engagement, and ethical governance. Students will learn how to integrate these principles into corporate strategies to achieve a balance between profitability and sustainability.

Learning Objective 4: Equip students with hands-on experience through real business scenarios by addressing dilemmas companies face in the era of climate change and appreciate the role of leadership in driving and implementing sustainable practices. Students will understand how leaders like Dr Nick balance stakeholder interests, ethical standards, and operational efficiency, and how this balance impacts the company’s growth and sustainability objectives.

This case introduces students to the difficulty an environmental manager faces in balancing the interests of the community at large with the company’s goals. Dr Nick Okello, an environmental manager at Base Titanium, is the protagonist of the case. For several years, Dr Nick has overseen the business’s environmental programs at the high-grade mineral sand mine called Kwale Operation, which is situated along Kenya’s coast. The case allows students to explore how Environmental, Social, and Governance (ESG) principles are applied in a mining company setting by using this case study. Simple assessments can be applied by students to evaluate ESG and discuss their analysis of it. The mining industry’s intricate relationship between corporate governance, business strategy, and environmental stewardship is exemplified by the Dr Nick case at Base Titanium. It provides a critical analysis of the difficulties businesses confront in attempting to strike a balance between sustainable ethical business practices and economic growth, especially in areas where governance issues are common.

This case is suitable for use in executive education, MBA, senior undergraduate, and other graduate-level business programs in courses such business management, organizational behaviour, environmental sciences, project management, strategic management, operations, finance, corporate governance, leadership, and sustainable development.

Teaching notes are available for educators only.

CSS 4: Environmental Management.

This case study aims to study cost benefit analysis, economic evaluation and its types, study and understand different costs involved in logistics and to identify the role of dynamic leadership in nonstructured organization.

This case study is about one such unique nongovernmental organization (NGO), which was working in commercial space but which did not work for profit. This NGO called Yuvashakti was a well-respected, nonprofit organization in Pune that promoted mountaineering, climbing and other outdoor adventure pursuits. About 30 years ago, a group of young adventure enthusiasts led by the late Dr Mohan Dharia, the organization’s founding president, established Yuvashakti with the goal of introducing young people to outdoor activities such as skiing, climbing and trekking. Since 1985, Yuvashakti had consistently organized several Himalayan trekking programs. Yuvashakti organized bike and motorbike tours, visits to wildlife sanctuaries and other types of excursions around India all year long. In the past 30 years, “Yuvashakti” had done a lot of good for the young people of Maharashtra. Their job was multifaceted.

This case study is suitable for undergraduate students.

Teaching notes are available for educators only.

CSS12: Tourism and hospitality.

The authors have discussed the importance of creating socially transformative health-care ecosystems in emerging economies like India. After completion of this case study and assignment questions, the students will be able to apply the case experience to comprehend the underlying factors influencing the decision of the implementation and replication of the Sanjeevani health-care service delivery model, understand the impact of free and subsidized health-care service delivery models on social transformation, evaluate the operational performance of health-care institutions using the balanced scorecard model and create practical relevance when implementing novel health-care solutions like Sanjeevani, which has been successful due to its singular pin-pointed focus on solving the issue of congenital heart diseases (CHDs).

Forty thousand surgeries against 0.3 million new CHD patients every year was the unbalanced equation of pediatric cardiac care in India. It also contributed to almost 46% of total CHD prevalence in the world. This case study explores the evolution of the affordable health-care ecosystem provided by Sri Sathya Sai Sanjeevani Hospital (Sanjeevani), Raipur, Chhattisgarh, which included services ranging from OPD to postoperative surgical care, including accommodation and food, completely free of cost. Over the past eight years, it had managed over 80,000 pediatric cardiac outpatients and performed over 9,000 surgeries. This case study also outlines the execution of Sanjeevani, as an affordable health venture aimed at producing social transformation. The pertinent question to be explored is, “Can the Sanjeevani healthcare ecosystem be replicated, both operationally and financially?”

This case study is suited to undergraduate Bachelor of Business Administration, Master of Business Administration (MBA) and executive MBA.

Teaching notes are available for educators only.

CSS 2: Built Environment.

The learning outcomes are as follows: to analyse the issue(s) presented within specific case study context (C4); to formulate solutions to identified issue(s) within specific case study context (C5); and to synthesise a group plan to solve issue(s) within specific case study context (A4).

In 2017, China proclaimed that it would no longer accept plastic waste for recycling, this was in-line with China’s Operation “National Sword” to review the quality of these plastic imports to ensure their recyclability. This sent shock waves through a now globalised recycling network, with China previously having imported 95% of the EUs and 70% of US plastics that had been collected for recycling. This plastic backlog was then diverted to South-East Asian nations, particularly Malaysia, which this case focuses the discussion upon. While the potential for significant economic benefits drew the attention of illegitimate and unscrupulous businessmen alike, the environmental degradation from the often, low technological recycling processes and even burning of low-grade plastics brought profound negative impacts. This case focuses upon, then Minister, Yeo Bee Yin who led the Ministry of Energy, Science, Technology, Environment and Climate Change, in which she took an active and aggressive stance in attempt to stop Malaysia becoming the dumping ground for the global plastic crisis.

This case is appropriate for final year undergraduate and any postgraduate degrees in Business.

Teaching notes are available for educators only.

CSS 4: Environmental Management.

The learning outcomes are as follows: to identify and analyze the importance of operations management in a situation demanding minimizing environmental impact and maintaining operational momentum; access the risks faced during project executions and apply project management concepts to facilitate Karachi Steel in implementing indigenous technological solutions; and evaluate the importance of adaptability, continuous improvement and innovation in creating sustainable solutions to address complex challenges.

Javaid Iqbal, CEO of Karachi Steel, was the case’s protagonist. With capacity expansion, Javaid relocated the steel facility from Rawalpindi to Islamabad, Pakistan. The company encountered several difficulties because of the air emissions’ inconvenience to nearby residents and the strict environmental regulations. To push the emissions into the air, the company first installed a locally fabricated chimney. Later, they hired a foreign Pakistani engineering firm to install air filters, but the project proved unsuccessful. To control emissions, the company developed a Wet Particulate Control (WPC) system based on a water-sprinkling mechanism. The endeavor was successful, but it resulted in water pollution. As a result, Karachi Steel signed a contract with a local engineering company that invented and effectively installed an air filtration system. Karachi Steel not only devised solutions for their predicaments but also made significant contributions toward achieving the Sustainable Development Goals (SDGs). However, the emissions reporting and monitoring mechanism continued to cause inconvenience for regulators. In addition, the filtration facility encountered a blocked duct conveying zinc sulfate from smoke, resulting in the periodic suspension of operations. As Karachi Steel seek long-term solutions to current challenges, it is critical to examine the relationship between internal circumstances and external forces and stimulate a holistic approach to resolving issues within the realms of operations management and project management.

The case study is suitable for students pursuing their undergraduate degree programs in business studies or management sciences. This case can be taught in specific subjects in the domain of management sciences, including project management and operations management. Furthermore, undergraduate students pursuing degrees in environmental sciences, specializing in environmental impact assessment and sustainable development, can also learn from this case study. These subjects have the potential to provide students with a detailed understanding of the dynamic relationship between environmental problems caused by business activities, and how to address these challenges using principles of project management and operations management. There is no pre-requisite for this case study, and the level of difficulty is moderate. The recommended teaching pedagogy for this multidisciplinary case study includes role-playing exercises, simulations to replicate real-world situations and the Socratic method, which encourages critical thinking.

Teaching notes are available for educators only.

CSS 7: Management Science.

Risk identification and qualitative assessment are the learning outcomes.

The Bharat Bijlee Construction Limited (BBCL) was one of the largest construction companies operating in the power sector in India. After successfully completing a few projects in the Middle East, BBCL decided to expand its presence into African region. The BBCL was awarded a $85m contract for three sub-station projects to modernise Algeria’s power grid system by the “Shariket Karhaba Koudiet Eddraouch Spa”, a state-owned company in charge of power generation, transmission and distribution in Algeria.

The project, which is the first of BBCL in Saharan region in Algeria’s, presents many unique situations that company had never encountered before, including sand dunes, severe weather, remote locations, supply chain & logistics, strict contractual deadlines and a high level of construction risk. The project manager for BBCL was sceptic about how well his company would perform under the present project circumstances. How could he better align himself with the client, the various on-site local contractors and the numerous suppliers spread around the world?

The case emphasises the identification of various project risks that the project manager might encounter in the project. What do the PESTLE and ASCE frameworks for risk identification each represent, and how are they helpful for the project team in understanding various risks? How should the project’s qualitative risk assessment be conducted? And how can a heat map be a better tool for comprehending the criticality of each risk in the project?

Undergraduate and post graduate courses in project management, civil engineering and architecture domain.

Teaching notes are available for educators only.

CSS 2: Built Environment.

The primary learning objectives/outcome of case discussion is to apply design thinking principles to design innovative and socially responsible strategies that promote financial sustainability for organizations serving unique societal needs. The secondary learning objectives/outcome of case discussion is to gain a deeper appreciation for the potential social impact of their innovative ideas and understand the complexities and ethical considerations in social entrepreneurship, especially when working with individuals with special needs.

The case study describes the challenge facing Anil Kumar Kundra, the founder and trustee of Autism Ashram and Autism Guardian Village in Hyderabad and Gujarat, an organization that provides shelter and care for individuals with autism and residential facilities for their parents. Autistic individuals often lack social skills and may face challenges in reading, writing and communicating. In addition, they may experience behavioral issues, making it difficult for them to obtain employment or run their own ventures, resulting in a lifetime financial dependency on their guardians. In August 2023, Kundra, in pursuit of sustainability, aims to empower autistic individuals in the ashram to attain financial independence. He envisions Autism Ashrama as a self-sustaining entity, no longer dependent on contributions from parents. The dilemma facing Kundra is the need to identify innovative ideas that will enable these autistic individuals to contribute to revenue generation. The challenges faced by autistic individuals in their day-to-day lives make Kundra’s decision-making complex. While he acknowledges the challenge, he firmly believes that a handful of transformative ideas can bring about a revolutionary shift in the ecosystem for autistic individuals, rendering this business model truly sustainable. The case study invites students to help Kundra identify innovative ideas using design idea techniques, such as the Stanford d.school model.

This take-home assignment is suitable for both undergraduate and postgraduate students and is designed to explore the integration of sustainable business practices and design thinking in a real-world context.

Teaching notes are available for educators only.

CSS 7: Management science.

After reading the case and answering the case assignments, students will be able to understand and explain the challenges and opportunities for engineering, procurement and construction (EPC) contractors and their subcontractors; understand and critically analyse the advantages and disadvantages of insourcing and outsourcing of engineering, procurement and construction in EPC projects; determine which situations merit insourcing or outsourcing within each of engineering, procurement and construction in EPC projects; understand and identify the competencies and qualifications that a subcontractor must possess if any EPC activity is outsourced to them; and develop a decision-making framework to determine which EPC activities must be kept in-house or outsourced in EPC projects.

In mid-March 2021, PetroSahand International Group, a leading EPC contractor specializing in the oil, gas and petrochemicals industries in Iran, encountered significant challenges with its subcontractors in engineering and construction. These issues resulted in widespread repercussions for the company, including project delays and mounting debts. At the peak of these crises, PetroSahand’s senior management embarked on a thorough examination of whether to insource or outsource various aspects of their operations, such as engineering, procurement and construction. Their objective was twofold: to prevent similar setbacks in future projects and to navigate existing projects with minimal disruption to the company’s reputation. To address this critical dilemma, PetroSahand enlisted the expertise of a consulting team from Sharif University of Technology. Comprising esteemed professors, graduates and students from one of Iran’s most respected institutions, this team undertook an exhaustive analysis of the insourcing versus outsourcing debate across EPC domains. Subsequently, they presented their comprehensive findings, thereby confronting PetroSahand’s senior management with a pivotal choice regarding the optimal approach for each activity.

The audience of this work is undergraduate and graduate students who are enrolled in project management courses, both fundamentals and advanced. In addition, this case helps senior managers of EPC contractors gain a deeper and more comprehensive understanding of insourcing or outsourcing different project activities.

Teaching notes are available for educators only.

CSS 7: Management science.

This case study aims to simulate the learners’ thoughts about the earnest comprehension of sustainable brands with zero waste policy. It will further prompt them to anatomize the growth strategy of a sustainable brand, as it delineates the challenges faced by a woman ecopreneur. In response to these causative conundrums, the incumbent would be able to develop an understanding on the evolving landscape in context to the association between meeting consumer expectations, brand positioning and its channelization towards growth and revenue generation. Furthermore, the learners will be able to analyse the stages of product life cycle of a sustainable product and recommend an effective strategic plan to meet the consumer expectations and achieve desired growth by the application of Kano model.

Thenga was a home-grown brand from Kerala (God’s own country) founded by Maria Kuriakose, a native of Kerala in 2019. Unlike other brands, which were using coconut as a source of flesh, water and oil, Kuriakose came up with an idea of using the tossed shells of coconuts which eventually used to end up at landfills. These shells were crafted into aesthetics by the team of Thenga while adhering to the zero-waste policy. The brand gained momentum with the overwhelming positive response from the natives of Kerala and carved a way across the boundaries of Kerala, gradually reaching to every corner of India. Kuriakose thought of scaling the brand in the international boundaries as well. Within no time, the brand was a success. However, over the time, the brand was confronted with two broad dilemmas. First, non-uniformity in the sizes of the products, especially in bulk orders where maintaining uniformity was essential. The customers complained that there was no uniformity in the size of the products because for gifting purposes, they wanted all the products to look alike. And second, selecting the stringent quality shells because the ones exposed to sun for a very long time were not ideal for crafting the products due to the cracking of the shells, thereby affecting their durability. It became difficult addressing to these complex issues because the shells were nature’s creations. These issues were very different from the managerial dilemmas. Would the perspectives of management provide a solution? Kuriakose had to find a way out in the long term for the survival of the brand especially during its growth phase.

The case study is relevant for students in disciplines of entrepreneurship, green marketing, brand management, corporate social responsibility and strategy. It is designed for advanced MBA/PGDM and capstone courses. The case study also addresses the elements of customers’ perceptions towards innovative products and can be used as an addition for marketing courses dealing with strategies to improve the awareness and adoption of sustainable products.

Teaching notes are available for educators only.

CSS 4: Environmental management.