Case studies

After completion of the case study, the students will be able to understand lead and lag indicators, understand job performance and its linkage with job satisfaction, calculate the cost of turnover and design solutions to the problem of attrition and low satisfaction.

Pace Control Gears was a small-scale enterprise based out of Sonipat, India. It was an entrepreneurial venture by Rajesh Kumar, who had set Pace in 2010 to manufacture low-voltage electrical apparatus. Recently, Pace had begun to experience issues with quality control that were largely the result of human error. The company was facing a drop in satisfaction levels and higher attrition levels among the employees. Kumar had to find a solution quickly to address the problem, as it had direct implications for the company’s margins and the assurance of quality that it was associated with in the market.

This case study is suited to undergraduate and postgraduate courses in human resource management and general management.

Teaching notes are available for educators only.

CSS 6: Human Resources Management.

The learning outcomes are as follows: to analyse the issue(s) presented within specific case study context (C4); to formulate solutions to identified issue(s) within specific case study context (C5); and to synthesise a group plan to solve issue(s) within specific case study context (A4).

In 2017, China proclaimed that it would no longer accept plastic waste for recycling, this was in-line with China’s Operation “National Sword” to review the quality of these plastic imports to ensure their recyclability. This sent shock waves through a now globalised recycling network, with China previously having imported 95% of the EUs and 70% of US plastics that had been collected for recycling. This plastic backlog was then diverted to South-East Asian nations, particularly Malaysia, which this case focuses the discussion upon. While the potential for significant economic benefits drew the attention of illegitimate and unscrupulous businessmen alike, the environmental degradation from the often, low technological recycling processes and even burning of low-grade plastics brought profound negative impacts. This case focuses upon, then Minister, Yeo Bee Yin who led the Ministry of Energy, Science, Technology, Environment and Climate Change, in which she took an active and aggressive stance in attempt to stop Malaysia becoming the dumping ground for the global plastic crisis.

This case is appropriate for final year undergraduate and any postgraduate degrees in Business.

Teaching notes are available for educators only.

CSS 4: Environmental Management.

By the end of this case study analysis, students are expected to understand the dynamics of global markets by identifying institutional voids in prospective export destinations using the framework by Khanna and Palepu; evaluate potential export destinations for Nablus Soap Company (NSC), taking into account the identified institutional voids and their implications for market entry.

Formulate strategies for NSC to address institutional voids and manage exports effectively to the selected country.

Assess various global expansion strategies beyond exporting for NSC, examining their respective advantages, disadvantages, and feasibility within the context of the company’s goals.

Analyze the factors that contributed to NSC’s successful expansion into 72 countries, despite the longstanding challenges faced by Palestinians since 1948, including the recent impact of the 2023 situation in Gaza on the West Bank.

This case study provides students with an in-depth understanding of the Palestinian economy, focusing on the NSC, a small and medium enterprise in the olive soap industry. Founded by Mojtaba Tbeleh in 1971, NSC’s legacy spans 400 years. It is known for crafting handmade, 100% natural soap with olive oil as a key ingredient. As of November 2023, NSC has successfully expanded its exports to more than 72 countries. Despite this achievement, the company faces significant challenges due to various restrictions, particularly those imposed by occupying forces. The case study provides insights into NSC’s international expansion challenges, guiding students in understanding how institutional voids in potential expansion destinations impact market entry decisions. It encourages them to identify these voids select appropriate markets and formulate strategies to leverage NSC’s global expansion potential.

This case study is suitable for undergraduate- or postgraduate-level students.

Teaching notes are available for educators only.

CSS 5: International business.

The learning outcomes are as follows: to identify and analyze the importance of operations management in a situation demanding minimizing environmental impact and maintaining operational momentum; access the risks faced during project executions and apply project management concepts to facilitate Karachi Steel in implementing indigenous technological solutions; and evaluate the importance of adaptability, continuous improvement and innovation in creating sustainable solutions to address complex challenges.

Javaid Iqbal, CEO of Karachi Steel, was the case’s protagonist. With capacity expansion, Javaid relocated the steel facility from Rawalpindi to Islamabad, Pakistan. The company encountered several difficulties because of the air emissions’ inconvenience to nearby residents and the strict environmental regulations. To push the emissions into the air, the company first installed a locally fabricated chimney. Later, they hired a foreign Pakistani engineering firm to install air filters, but the project proved unsuccessful. To control emissions, the company developed a Wet Particulate Control (WPC) system based on a water-sprinkling mechanism. The endeavor was successful, but it resulted in water pollution. As a result, Karachi Steel signed a contract with a local engineering company that invented and effectively installed an air filtration system. Karachi Steel not only devised solutions for their predicaments but also made significant contributions toward achieving the Sustainable Development Goals (SDGs). However, the emissions reporting and monitoring mechanism continued to cause inconvenience for regulators. In addition, the filtration facility encountered a blocked duct conveying zinc sulfate from smoke, resulting in the periodic suspension of operations. As Karachi Steel seek long-term solutions to current challenges, it is critical to examine the relationship between internal circumstances and external forces and stimulate a holistic approach to resolving issues within the realms of operations management and project management.

The case study is suitable for students pursuing their undergraduate degree programs in business studies or management sciences. This case can be taught in specific subjects in the domain of management sciences, including project management and operations management. Furthermore, undergraduate students pursuing degrees in environmental sciences, specializing in environmental impact assessment and sustainable development, can also learn from this case study. These subjects have the potential to provide students with a detailed understanding of the dynamic relationship between environmental problems caused by business activities, and how to address these challenges using principles of project management and operations management. There is no pre-requisite for this case study, and the level of difficulty is moderate. The recommended teaching pedagogy for this multidisciplinary case study includes role-playing exercises, simulations to replicate real-world situations and the Socratic method, which encourages critical thinking.

Teaching notes are available for educators only.

CSS 7: Management Science.

Following a discussion of the case, students should be able to analyse competitive dynamics: provide an in-depth critical analysis of Ilco Farming’s microenvironment, using the structure–conduct–performance framework; evaluate strategic positioning: conduct a SWOT analysis of Ilco Farming’s medicinal cannabis business; and develop strategic approaches: propose actionable strategies that would provide effective solutions to the problem of constrained market conditions currently faced by Ilco Farming.

Coenie and Ilse Venter established Ilco Farming, a cannabis farm located in the Viljoenskroon district in the Free State province in South Africa, in 2021. From the beginning, they poured their hearts and souls into their new venture, which soon paid off. A few short months after Ilco Farming began operating, despite the presence of other large competitors, Ilco Farming supplied a large share of the domestic medicinal market with flower heads. But then an unexpected challenge presented itself. In March 2023, Ilco Farming was operating at only 23% (600 m²) of its production capacity of 2600 m² and had considerable room for growth, the local market – at least the local legal market – for cannabis began to show signs of saturation. Coenie and Ilsa found themselves at the proverbial crossroads, grappling with the crucial decision of how to secure their farm’s future in the face of a fast-saturating local (legal) cannabis market and a thriving (illegal) black market. Coenie and Ilse refused to entertain the idea of going the black market route, as they were unwilling to risk losing their operating licence. They calculated that the farm would reach breakeven point within the next two years, with profits unlikely during this period. Should they persist with their current strategy of producing high-quality products and delivering a superior service in the hopes of growing their market share? Or should they consider other strategic options? Coenie and Ilse were sitting at their boardroom table having a cup of coffee and looking out of the window at Ilco Farming’s impressive SAHPRA- and GAP-approved warehouse and tunnels. “What should we do?” they both wondered.

The case study can be used in postgraduate courses in microeconomics (PGDIP/MBA) and agricultural economics (PGDIP/MBA).

Teaching notes are available for educators only.

CSS 5: International business.

This case study would enable the learners to identify and evaluate the factors impacting the strategic decision to enter international markets. The learners would be able to identify parameters such as level of competition, perception regarding foreign entrants and demand factors that are crucial for the form to consider while taking such an important decision. The case study will also allow learners to understand the challenges of an entrepreneurial journey.

This case study is an interesting story of two entrepreneurs’ dilemma of internationalization strategy of their firm Aeron. Their firm’s product Tilt Switch had a good international demand and both partners wished to capture this opportunity, post the COVID-19 pandemic. This case study shows how the firm looked into factors to study new international markets, balancing risk and opportunity. The case study highlights the important role of strategic planning in achieving successful internationalization by analysing various approaches to market entry and adaptation. The firm had a choice of either developing their domestic market India or going for international markets of the USA or European Union.

This case study is suitable for graduation and postgraduation courses.

Teaching notes are available for educators only.

CSS 5: International Business.

Specific teaching and learning objectives include to identify factors influencing market expansion decisions and recommend appropriate entry modes, understand factors in the international business environment that contribute to success or failure of international businesses in developing countries, evaluate strategies enabling international businesses to sustain market presence in developing countries and overcome local competition, analyze the concept of local responsiveness in international business operations and suggest strategies for internationalizing domestic companies from developing countries.

The McDonald’s case examines the challenges associated with market expansion by global brands. The case occurs during the early-globalization era in the 1990s. Barbados, a developing country, is the site for potential expansion. Prospective investors, the Winters, are desirous of establishing a McDonald’s in Barbados. They need to thoroughly analyze the previous experience of McDonald’s against the host country’s current international business environment, e.g. political, economic, cultural and competitive environment. This case analysis provides a framework for understanding the multifaceted reasons behind McDonald’s exit from Barbados, considering the complex interplay of political, economic, sociocultural, technological and legal factors in the international business environment. The case equips the instructor and students to explore the risks of international expansion, particularly in developing country markets. The case study on McDonald’s failure in Barbados highlights the need to thoroughly examine one’s market entry strategy and available information on the host market and be more locally responsive regarding tastes and preferences. The case study also presents essential lessons for firms and planners from developing countries. Local firms innovated and enhanced their operations in response to the threat from the entry of the global fast-food giant. Yet, they did not seek to internationalize once McDonald’s exited the Barbadian market. The case study, therefore, considers strategies firms from developing countries could utilize to penetrate markets from developed countries.

At the undergraduate level, the McDonald’s Barbados case can be used in international business classes to highlight risks in the international business environment and the need for a carefully planned and executed market entry strategy.

Teaching notes are available for educators only.

CSS5: International Business.

The primary learning objectives/outcome of case discussion is to apply design thinking principles to design innovative and socially responsible strategies that promote financial sustainability for organizations serving unique societal needs. The secondary learning objectives/outcome of case discussion is to gain a deeper appreciation for the potential social impact of their innovative ideas and understand the complexities and ethical considerations in social entrepreneurship, especially when working with individuals with special needs.

The case study describes the challenge facing Anil Kumar Kundra, the founder and trustee of Autism Ashram and Autism Guardian Village in Hyderabad and Gujarat, an organization that provides shelter and care for individuals with autism and residential facilities for their parents. Autistic individuals often lack social skills and may face challenges in reading, writing and communicating. In addition, they may experience behavioral issues, making it difficult for them to obtain employment or run their own ventures, resulting in a lifetime financial dependency on their guardians. In August 2023, Kundra, in pursuit of sustainability, aims to empower autistic individuals in the ashram to attain financial independence. He envisions Autism Ashrama as a self-sustaining entity, no longer dependent on contributions from parents. The dilemma facing Kundra is the need to identify innovative ideas that will enable these autistic individuals to contribute to revenue generation. The challenges faced by autistic individuals in their day-to-day lives make Kundra’s decision-making complex. While he acknowledges the challenge, he firmly believes that a handful of transformative ideas can bring about a revolutionary shift in the ecosystem for autistic individuals, rendering this business model truly sustainable. The case study invites students to help Kundra identify innovative ideas using design idea techniques, such as the Stanford d.school model.

This take-home assignment is suitable for both undergraduate and postgraduate students and is designed to explore the integration of sustainable business practices and design thinking in a real-world context.

Teaching notes are available for educators only.

CSS 7: Management science.

After reading the case and answering the case assignments, students will be able to understand and explain the challenges and opportunities for engineering, procurement and construction (EPC) contractors and their subcontractors; understand and critically analyse the advantages and disadvantages of insourcing and outsourcing of engineering, procurement and construction in EPC projects; determine which situations merit insourcing or outsourcing within each of engineering, procurement and construction in EPC projects; understand and identify the competencies and qualifications that a subcontractor must possess if any EPC activity is outsourced to them; and develop a decision-making framework to determine which EPC activities must be kept in-house or outsourced in EPC projects.

In mid-March 2021, PetroSahand International Group, a leading EPC contractor specializing in the oil, gas and petrochemicals industries in Iran, encountered significant challenges with its subcontractors in engineering and construction. These issues resulted in widespread repercussions for the company, including project delays and mounting debts. At the peak of these crises, PetroSahand’s senior management embarked on a thorough examination of whether to insource or outsource various aspects of their operations, such as engineering, procurement and construction. Their objective was twofold: to prevent similar setbacks in future projects and to navigate existing projects with minimal disruption to the company’s reputation. To address this critical dilemma, PetroSahand enlisted the expertise of a consulting team from Sharif University of Technology. Comprising esteemed professors, graduates and students from one of Iran’s most respected institutions, this team undertook an exhaustive analysis of the insourcing versus outsourcing debate across EPC domains. Subsequently, they presented their comprehensive findings, thereby confronting PetroSahand’s senior management with a pivotal choice regarding the optimal approach for each activity.

The audience of this work is undergraduate and graduate students who are enrolled in project management courses, both fundamentals and advanced. In addition, this case helps senior managers of EPC contractors gain a deeper and more comprehensive understanding of insourcing or outsourcing different project activities.

Teaching notes are available for educators only.

CSS 7: Management science.

This case study is intended to help students to evaluate Kavak’s business model, examine the global expansion strategy of Kavak, analyze the competitive strategy adopted by Kavak, recognize the ways in which Kavak leveraged technology in all its business operations, examine the key challenges faced by Kavak in the fragmented Latin American as well as global used car market and explore strategies that Kavak can adopt in future to maintain its dominance in the global used car market.

This case study is about the meteoric rise of Kavak, a Mexican used car retailer that aimed to disrupt the emerging pre-owned car markets with its unique value propositions and compelling global expansion strategy. Co-founded in 2016 by Carlos García Ottati (Ottati), in Mexico City, Kavak emerged as an end-to-end solution to buy, manage, sell and finance pre-owned cars. Using pricing algorithms driven by artificial intelligence and machine learning-based inspection tools and personalized recommendations, Kavak reshaped the mobility sector in the Latin American and Middle Eastern regions. In a mere six years of operation, the company established its presence in nine countries: Argentina, Brazil, Chile, Colombia, Mexico, Peru, Turkey, the UAE and Oman. Kavak’s innovative yet simple business model ensured transparency and guarantees in all its transactions where reconditioned vehicles were sold to thousands of customers through its e-commerce platform as well as a network of brick-and-mortar hubs. Its in-house financing arm Kavak Capital was at the core of its business model, as it offered affordable leasing options, making car ownership possible for both first- and second-time car owners within just a few minutes of applying. The platform had an inventory of 40,000 vehicles as of 2023 with more than 50% of Kavak’s sales being financed by Kavak Capital. The case study discusses the challenges faced by Kavak in the fragmented used car market including rising interest rates for vehicle loans, managing capital-intensive operations, rising competition and external economic headwinds such as inflation and slowing economic growth. Going forward, the challenge before Ottati and his team was how to make profits, build customer trust, attract customers and achieve global success.

This case study is suitable for MBA/MS level and is designed to be a part of the business strategy/and international business curriculum.

CSS: 5: International business.

Teaching notes are available for educators only.

This case study aims to simulate the learners’ thoughts about the earnest comprehension of sustainable brands with zero waste policy. It will further prompt them to anatomize the growth strategy of a sustainable brand, as it delineates the challenges faced by a woman ecopreneur. In response to these causative conundrums, the incumbent would be able to develop an understanding on the evolving landscape in context to the association between meeting consumer expectations, brand positioning and its channelization towards growth and revenue generation. Furthermore, the learners will be able to analyse the stages of product life cycle of a sustainable product and recommend an effective strategic plan to meet the consumer expectations and achieve desired growth by the application of Kano model.

Thenga was a home-grown brand from Kerala (God’s own country) founded by Maria Kuriakose, a native of Kerala in 2019. Unlike other brands, which were using coconut as a source of flesh, water and oil, Kuriakose came up with an idea of using the tossed shells of coconuts which eventually used to end up at landfills. These shells were crafted into aesthetics by the team of Thenga while adhering to the zero-waste policy. The brand gained momentum with the overwhelming positive response from the natives of Kerala and carved a way across the boundaries of Kerala, gradually reaching to every corner of India. Kuriakose thought of scaling the brand in the international boundaries as well. Within no time, the brand was a success. However, over the time, the brand was confronted with two broad dilemmas. First, non-uniformity in the sizes of the products, especially in bulk orders where maintaining uniformity was essential. The customers complained that there was no uniformity in the size of the products because for gifting purposes, they wanted all the products to look alike. And second, selecting the stringent quality shells because the ones exposed to sun for a very long time were not ideal for crafting the products due to the cracking of the shells, thereby affecting their durability. It became difficult addressing to these complex issues because the shells were nature’s creations. These issues were very different from the managerial dilemmas. Would the perspectives of management provide a solution? Kuriakose had to find a way out in the long term for the survival of the brand especially during its growth phase.

The case study is relevant for students in disciplines of entrepreneurship, green marketing, brand management, corporate social responsibility and strategy. It is designed for advanced MBA/PGDM and capstone courses. The case study also addresses the elements of customers’ perceptions towards innovative products and can be used as an addition for marketing courses dealing with strategies to improve the awareness and adoption of sustainable products.

Teaching notes are available for educators only.

CSS 4: Environmental management.

The learning outcomes of this study are to identify and discuss ways in which energy consumption in a residential educational institute can be reduced by improving demand-side energy management for sustainable development; summarise the challenges that an institute faces in transitioning to a more environmentally friendly mode of operations concerning energy management; illustrate the difference between operating expense and capital expenditure methods used for solar rooftop projects from the perspective of Goa Institute of Management (GIM); and analyse different project proposals for solar rooftop power generation energy using capital budgeting techniques.

Dr Ajit Parulekar, director at GIM, was evaluating the steps taken over the past few years for sustainable energy management to understand their impact and consider ways in which to take the environmental sustainability agenda forward. One of the projects that he was considering was the rooftop solar power plant. GIM had received proposals from several different vendors and evaluated three proposals out of these. He needed to decide on the capacity of the rooftop solar power generation and the type of contract that he should get into for the implementation of the project. This case study describes the differences and highlights the advantages and disadvantages of all the mentioned models with respect to GIM.

This case study is suitable for post-graduate level management students, as well as for undergraduate-level finance and management students.

Teaching notes are available for educators only.

CSS4: Environmental management.

Upon completion of the case study, the students will be able to apply business upscaling strategies to an upcycling social enterprise that is embracing a circular economy approach by using the Ansoff growth matrix; to analyze strategies for transition to circularity using the butterfly diagram tool for both business and personal use; to indulge in upcycling exercises for a used product of their choice, not only unleashing their creative potential but also contributing to an idea that might get them to win a contest; to analyze different operational problems and efficiency opportunities that arise when a company takes on social and environmental causes as a business opportunity; and to strategize how a social enterprise can be sustained and made for-profit by applying business strategies.

This case study covers the concepts of upcycling under the gamut of circular economy, a concept that has become more of a strategy to sustain and survive in today’s world. This case is about Rimagined, an upcycling company that could be a model for circular ideas and upcycling of stuff. This case study narrates the growth and the challenges faced in upcycling and encourages students to ideate a new design for any upcycling item of their choice. This case will also make students strategize the expansion plan for Rimagined. Shailaja Rangarajan is the protagonist of this case study who started this social enterprise to make a difference and do her bit. Sustaining a social enterprise requires business acumen and risk-bearing capacities like any other business. Rangarajan was facing the dilemma of expansion and was trying out several feasible options. Rimagined had been unable to attract investors because their expectations of quick returns could not be immediately fulfilled. Investors focused more on waste management as an industry and not on upcycling as a separate area of work.

This case study is suitable for students of MBA or executive MBA level. Specifically, this case study can be used in business strategies and circular economy courses.

Teaching notes are available for educators only.

CSS 4: Environmental management.

An instructor engaged students in managing and reporting sustainability initiatives at an organisation. After completion of the case study discussion, the students will be able to critique the sustainability initiatives that can be undertaken at an organisation; understand sustainability reporting; analyse how result-based management aids in sustainability report preparation; recommend critical considerations for conducting a sustainability impact assessment by an educational institute.

The case contributed to the growing knowledge base about reporting sustainability initiatives at an organisation and managing them to aid in decision-making. The case called for better integration between sustainability activities and reporting under organisations’ Sustainable Development Goals (SDGs) or environmental, social and governance (ESG) reporting.

Ajay served as the head of the management department and a leading member of the sustainability initiatives at University Alpha, Delhi NCR, India. He was assigned the task of publishing the university’s annual report. The management had requested him to consider preparing a standalone sustainability report for the university.

He began the task by examining the benefits of standalone sustainability reporting. He proceeded to analyse the specifics of SDG reporting, SDG Accord reporting and ESG reporting using the Global Reporting Initiative guidelines. During discussions with a consultant, the necessary steps for creating an SDG-only report and an integrated SDG and ESG sustainability report were clarified.

Guidance from an expert led to an intention to use a result matrix in preparing the sustainability report and ongoing impact assessment of SDG initiatives for reporting. The dilemma involved deciding between continuing with the sustainability initiative listing in the annual reports or opting for a standalone sustainability report. Critical considerations concerning the sustainability impact assessment of SDG-related activities at an educational organisation were also explored.

This case is intended for discussion in the graduate-level program in strategy, general management, sustainability management, environmental management and environmental economics. The case may also be used for participants in executive program.

Teaching notes are available for educators only.

CSS 4: Environmental Management.

This case study will allow students to critically analyse and develop entry strategies into untapped foreign markets. The case study was designed to introduce students to identifying and analysing information related to target markets for expansions in international business.

The main objectives of this case are to evaluate and make the “Go Global” decision for the company; to take a position on entry timing for a company for entering an overseas market; to select a country for entry based on cultural, administrative, geographic and economic analysis and other relevant factors; and to evaluate a firm’s readiness for exports.

This case study on Satya Pharmaceuticals presents a typical dilemma faced by small and medium enterprises (SMEs) in emerging markets such as India while exploring the untapped overseas markets to expand their business. Satya Pharmaceuticals produced over-the-counter Ayurvedic medicines. With the onset of the COVID-19 pandemic, the consumer preference for Ayurvedic products had increased globally. Home country governments’ emphasis on exports and conducive consumer preferences created an opportune time for such SMEs to explore uncharted markets with a propensity for herbal medicines. Amidst strict regulations regarding safety, efficacy, labelling and packaging norms, along with a subjective understanding of the consumers’ sentiments regarding alternate medicines, SMEs had to select their target market carefully for their products to be successful overseas. This case study presents the basic information that entrepreneurs needed to explore the foreign markets. It revolved around checking firms’ preparedness to explore foreign markets, identifying target markets, timing the entry and entering those markets.

This case is appropriate for graduate-level courses in management that offer subjects such as international business.

Teaching notes are available for educators only.

CSS 5: International business.

The objectives of the case study are to provide an overview of intellectual property rights and intellectual property rights in Indian context; understand the intellectual property rights implementation and challenges for implementing it in emerging economies; understand what would be the best approach that companies can adopt when the companies face backlash in such circumstances; and explore the scope for redefining the intellectual property rights in the changing global environment.

In December 2021, the Protection of Plant Varieties and Farmers’ Rights Authority (PPV&FRA) in India revoked the plant variety protection (PVP) certificate granted to PepsiCo India Holding (PHI) for its Lays variety potato (FL-2027, known as FC-5). The FC-5 variety possessed low moisture content which made it suitable for making potato chips. The controversy started with Pepsi suing the small and marginal farmers of Gujarat for alleged patent infringement and cultivating the patented variety. Pepsi’s legal suit against nine marginal potato farmers in Gujarat initiated the dispute over how intellectual property (IP) rights are used to intimidate small, marginal farmers and its infringement of farmers’ rights. But, on the other side, the interesting aspect was how IP infringement could be a setback for the companies that made the capital investment to develop the variety. The case study discusses the backlash Pepsi faced due to this IP rights legal suit and the punitive aspects of IP rights (IPR) law. Moreover, in the context of the global pandemic, the case study helped discuss the need to redefine the intellectual property rights regime keeping in mind global welfare.

The case is intended for use in postgraduate-level management courses in agricultural marketing, agribusiness, international business and economics. This study can help management students understand how IPR is defined, the apparent complexities associated with it and the adverse effect of it on small and marginal farmers in emerging economies.

Teaching notes are available for educators only.

CSS 5: International business.

Upon completion of the case study, the students will be able to find the challenges and underlying structures that cause the problem; the students will be able to identify the dynamic variables and develop the interconnection and interlinkages among the time-delayed variables to build the story of the business case; the students could develop the block diagram and could build the system dynamics model using the simulation software STELLA, and if they do not have the simulation software, even then they could have a mental model to understand the problem well; the system dynamics students can design the policies to make the system better behaved and recommend solutions; and the students could make mind maps and develop the mental model and could recommend solutions and way forward to overcome the challenges and solve the issues.

Tradeasia is a small-scale manufacturing firm that had started its business activities near Sundar Industrial Estate, Raiwind, in September 2007. The company’s prime focus was to buy the potato starch from chips manufacturing companies and, then, extract the potato starch from the waste potato using its own machinery and sell it as a sizing agent to textile mills. Quality characteristics in terms of better millage and enhanced gullibility made it compatible with Rafhan corn-based starch. The major challenge linked to potato starch was its degree of wetness; the potato starch either extracted from rotten potato or procured from the potato chips manufacturing companies had a high degree of wetness and moisture content. Wet potato starch sometimes had more than 60% moisture content, which was really a challenge. Owing to the high degree of wetness, the wet starch was prone to fungus growth, and within hours, the fungus created toxins if it was not dried immediately, and then after 24 h, toxins acquired a black colour, and they became hardened like pebbles. The starch then was unusable even for sizing purposes for textile products. Reduction in the degree of wetness was really a big challenge and demanded prompt action and high productivity of the operational staff to make that product dry for sale purposes. This was the biggest challenge that ended up in huge inventories of wet starch. Capacity constraints and operational inefficiency killed the company’s productivity and affected the company’s profit.

This case study is written and developed for MBA and MS-level supply chain students of the system dynamics course or those studying management of supply chain complexities. This case study discusses the operational challenges while running the business; huge inventories, capacity constraints and inefficiency in production operations were the challenges associated with almost all manufacturing industries. This case study discussed not only why such challenges are appearing in the business but also the solution that resided in the wisdom shared by the employees in the board meeting. An integrated system dynamics model could be used to design the policies to overcome such challenges. Even the block diagram of the model and causal loop diagram could help to conceptualize the problem and explore the way forward.

Teaching notes are available for educators only.

CSS 7: Management science.

Upon completion of this case study, students will be able to identify the main conceptual foundations of strategy in international business, determine the strategy of entry into a country through the analysis of dual pressures and propose the mode of entry into a country by analyzing the sources of competitive advantage in a firm’s value chain.

Café Galavis stood out as one of the most outstanding family businesses in industrial development, with a century-long trajectory in the production and sale of roasted and ground coffee in Cucuta, Colombia. However, in 2015, the diplomatic, humanitarian and economic crisis between the governments of Colombia and Venezuela led to the indefinite closure of the Colombian–Venezuelan border. As a result, the illegal coffee trade increased, and competition from traditional brands significantly affected sales, leading to financial difficulties and an urgent need for change in senior management. In addition, the demise of the manager who had been leading the company until 2018 exacerbated the business situation. Juan Francisco Yáñez, the new manager, joined the management of an emblematic company. From his first years of management, he implemented different strategies related to organizational policies, production, innovation and export of products to achieve stability. For the year 2023, the challenges for the new CEO were to lead a brand with more than a century of tradition and business roots and to enter new markets, owing to the high dependence on the Venezuelan market. Which countries should they enter in the internationalization process? Furthermore, what type of strategy and entry mode should Café Galavis implement to penetrate new markets? These were some of the challenges faced by the CEO; therefore, he required objective information to make decisions in consensus with his collaborators.

This case study is suitable for students of postgraduate academic programs in knowledge areas of international management, international business or MBA.

Teaching notes are available for educators only.

CSS 5: International business.

The case study will encourage reflection on the challenges that organisations face in attracting, engaging and retaining knowledge workers that are critical to their performance and growth. It is set in the context of innovative, high-tech organisations whose success is heavily dependent on the performance of information technology (IT) professionals, a specialised and heavily demanded workforce.

The case study depicts the struggle of Manoel Almeida, Descomplica’s chief technology officer, to reverse the scenario of demotivation and high turnover among IT employees and to attract new talent. The case study addresses the themes of knowledge worker attraction, engagement and retention, with a focus on IT professionals.

This case study is designed for undergraduate and graduate education programmes/courses.

Teaching notes are available for educators only.

CSS 7: Management science.

After completion of this case study, the students will be able to comprehend the importance of communication in managing change, examine the role of processes and systems in implementing change management initiatives at a large scale, assess the effectiveness of various strategies in mitigating resistance to change and recognise optimal strategies for communication processes and messages with respect to different audience and contexts.

This case study discusses decisions and strategies that led to Indore (a city in the state of Madhya Pradesh, India) becoming India’s cleanest city for the sixth time in a row. The case explores if the various strategies used by the commissioner of Indore Municipal Corporation would continue to succeed in mitigating resistance to change from the citizens of Indore or if the change management strategies needed to be revised. Amidst intensely rising competition from other cities, especially Surat (a city in the state of Gujarat, India), the case delves into the commissioner’s efforts to defend Indore’s claim of being India’s cleanest city for the sixth consecutive time.

This case study is suitable for use in executive modules and management development programs. It can be used for the following courses: ■ In change management course, this case study can cover critical aspects of strategies to mitigate resistance to change and bring about lasting behavioural changes in followers.■ In communication courses, this case study can cover key aspects of communicating the change vision of a leader to a large audience.

Teaching notes are available for educators only.

CSS 7: Management science

The study enables students to critique the internationalisation strategy of an African business including elements of macroeconomic analysis, company fit with jurisdictions, non-market strategies and mode of entry.

Roland van Wijnen was the chief executive officer of Pretoria Portland Cement Company Limited (PPC), a 130-year-old cement maker based in South Africa. He joined after the business had embarked on an international expansion strategy that had taken the business to countries of Rwanda, the Democratic Republic of the Congo and Ethiopia in a matter of years. This expansion caused the deflation of the Johannesburg-listed company’s share price. The company failed to appreciate a number of success factors in each jurisdiction. The challenges included cultural misalignments, macroeconomic analysis and mode of market entry. The case dilemma involved the choices that van Wijnen faced in re-evaluating the international footprint of the business.

Undergraduate or postgraduate level.

Teaching notes are available for educators only.

CSS 5: International business.

This case study covers different concepts related to leadership. It should help students analyze business situations from a leader’s perspective. By the end of this case study, students would be able to understand the role and the characteristics of leadership during a crisis using the 11 dimensions of character framework, map leadership personalities using the HEXACO model to understand the effectiveness of certain traits in crisis management and apply theories of change management using the Satir and Switch models, in addition to Kotter’s theory of change.

Elsewedy Electrometer Group (EMG) was owned and operated by Emad Zaki Elsewedy as the sole founder and chief executive officer (CEO). EMG was a leading company in the meters industry in Egypt. The time span of this case study covered the period from November 2011, when Elsewedy’s health was deteriorating, to his early retirement in September 2012, and his comeback, two years later, in September 2014. In November 2011, against the backdrop of Elsewedy’s deteriorating health and subsequent early retirement in September 2012, EMG faced several challenges in achieving its vision that hindered its business growth. These arose after Youssef Salah, the former export director of EMG, was appointed as the company CEO. In Elsewedy’s absence, EMG faced liquidity problems, as the banks demanded that it repay all its debts. At the same time, the business suffered severe losses owing to its inefficient operations. Elsewedy decided to return to EMG in September 2014 to find a solution and help the business recover to ensure its continuity and sustainability. After taking a holistic view of the crisis at hand, he was faced with a dilemma and several questions: Was the company leadership effective? Would a change in leadership be required? How could he lead effective change in light of the current crisis? How could he ensure that EMG did not end up in a similar predicament in the future? This case was designed to teach leadership in crisis and change management in the metering industry.

This case study is intended for graduate and undergraduate students studying a leadership or management course. It can help students comprehend the challenges that arise when a large business undergoes a management transition during a crisis. The case study also considers how leaders are shaped by crises. This case study can be considered as level 1 on a 1–3 scale, as the full description of the situation is given in the case study and the task of the students is to analyze the leader and his decisions using various academic concepts and theories (Erskin et al., 2003).

Teaching notes are available for educators only

CSS 7: Management science

The learning outcomes of this study are to assess the shared value model and elaborate on new multi-stakeholder approaches to business, where the stakeholders include the founders, investors, partners, employees, clients and the surrounding community; to consider the synergies between community development, environmental stewardship, sustainable business practices and the long-term health of organisations and communities, considering these as the new fundamentals of business; to examine the interconnectedness of vision, strategy, purpose and leadership in creating and evolving the shared value model; to explore the relationship between shared value practices and collective well-being, and a specific reference to nurturing transformative experiences through nature, personal development and community upliftment is made; and to assess Grootbos’ ability to translate their purpose and value proposition into a strategy and sustainable vision with a possibility of Grootbos achieving global impact through its evolving model, beyond the founder.

This case study explores the evolution of Grootbos Private Nature Reserve and Foundation, a luxury hospitality lodge and award-winning ecotourism destination, from humble beginnings in the Western Cape of South Africa to a global example of conservation, community, commerce sustainability and transformative experiences. The establishing of Grootbos and its growth and widespread recognition can be attributed to the vision and inspirational leadership of its founder, Michael Lutzeyer. Although much success has been achieved in conservation, community upliftment and individual development of community members within their region, Lutzeyer’s and ultimately, Grootbos’ vision extended well beyond South Africa and aspired to elevate their floral kingdom and model of development and conservation to a global platform of awareness. Although a shared value vision and strategy had transformed the business, placing Grootbos as a leader in transforming their industry and sparking an evolution in the shared value model itself through the interjection of transformative experiences, the larger question remained: How can Grootbos extend the impact, towards people and planetary well-being, beyond the scope of their individual place-based business and their industry? And in terms of the dilemma Lutzeyer and the management team at Grootbos faced: How will this vision and global ambition continue through succession, beyond Luzeyer’s personal drive at the helm?

Experienced leaders within a graduate degree program, executive Master of Business Administration (MBA) or executive education in the areas of leadership development, strategy, shared value and international business.

Teaching notes are available for educators only.

CSS4: Environmental management.

The purpose of this study is to make students understand the logic behind and implications of the “Socio-Technical Imbrication Framework” that can help them understand the importance of aligning workforce motivation and capabilities with the modern technology deployed in the organization. Moreover, students will understand the essentiality and criticality of customer satisfaction for the organization.

The technical services operations team at Cotton Web Limited formerly relied on JS Node, e-coordination system, to address customer complaints. There were many bugs in that system as it did not carry along the complaint tracking protocol, was slow in response, fundamentally structured upon manual complaint record keeping that resulted in piling up un-resolved complaints for a longer period of time. The team under the leadership of Mr. Hasan Ali, a competent expert working as GM Research and Data Analytics, undertook detailed analysis of recurring glitches in this system and replaced it with a novel Web-based automated complaint management system at Cotton Web Limited. This entire diagnosis and intervention process took almost three months till completion. The case is written for use in courses in the curriculum of BBA, BBIS, BSIT and BSCS programs at undergraduate level. It is most suitable for the courses in leadership, change management, business process reengineering, soft engineering, team building and business communication.

The case is suitable for teaching at Undergraduate level to the students of BBIS, BBA, BSCS and BSIT students in the last year of their degree programs. Teaching faculty can use case-based methodology for student learning by putting them into a real-life situation faced by an organization and letting them think critically and identify following points for further discussion and clarity: individual or in groups; problem identification through discussion; the stakeholders involved in the company’s situation through presentation or one-pager presentation; case analysis with reaching best solution to prevailing issue at hand through group discussion; reaching a decision or solution with reasonable logic and justification through group discussions; and create further dilemma on the basis of questions unanswered within this case story.

Teaching notes are available for educators only.

CSS 7: Management Science.

The case has the following learning objectives:

1. understand the various types of comparisons that are possible between groups over time and across space;

2. evaluate a policy intervention using relevant data and different methods; and

3. understand the meaning of the phrase “controlling for other relevant factors” in regression and non-regression contexts.

The difference-in-differences (DID) approach is a useful tool for making meaningful comparisons. This case tries to provide a non-technical introduction to the approach using a basic comparison of crime rates among districts in Punjab (Pakistan's largest province). Being the most populous region of the country, Punjab faces many governance challenges, and street crime is one of them. (Exhibit 5 provides additional information about the geographical and administrative setting used in this case study.) In 2016, Chief Minister Shahbaz Sharif established the Dolphin (police) Force in different locations to improve urban patrolling and reduce street crime. There were debates about the effectiveness of the Dolphin Force (DF).

Those who are skeptical of DF point to various situations that were handled incorrectly by DF personnel, as well as other administrative and operational problems in the initiative. Optimists believe it is beneficial and want it to be expanded to other districts and regions. The threat of street crime claims many lives and, according to optimists, necessitates the formation of a special force. Whether the huge resources invested in the DF worth their lot or not can be known through sound statistical analysis that can identify the difference in the rate of crime because of the DF. In this instance, the case provides information to answer the following question:

Is there a significant difference in crime rates between areas where the DF is operating and districts where it has not yet been installed?

In quantitative/statistical analysis classes, the case can be used to teach the DID technique to MBA/MS Applied Statistics/Applied Data Analysis students. It can also be used in undergraduate Econometrics classes.

Teaching notes are available for educators only.

CSS 7: Management Science.

The learning outcomes are as follows: identify and evaluate the impact of risk factors for health-care organizations during crisis; evaluate the role of different organizational factors in building resilient health-care organizations; define organizational resilience in a health-care context; and apply the effect-strategy-impact resilience framework.

September 2022 found Ranjan Thakur, the Hospital Director at Manipal Hospital, Jaipur (MHJ) reflecting on MHJ’s resilience toward future health-care crises. MHJ was established in the capital city Jaipur of the Indian state of Rajasthan in 2014, as a 225-bed multispecialty unit of the nationally renowned Manipal Health Enterprises Ltd. As the Hospital Director, Thakur had been responsible for navigating his team and the hospital through the multiple health-care related challenges exacerbated by the multiple waves of the Covid-19 pandemic in a large Indian state with a sizable rural and semiurban population. Though Thakur and his team of doctors had worked through the vulnerabilities of their health-care ecosystem, mapping the risks and mitigating the same, Thakur asked himself if they had done enough. He wondered how a health-care institution such as theirs could sustain effective health-care delivery during future crises situations to deliver high-quality health care to the vulnerable communities. Had they effectively mapped MHJ’s vulnerabilities and built resilience into the hospital’s functioning? The backdrop of the case is public health in the state of Rajasthan (Jaipur), and the case is rich in detailing social factors such as behavior issues of patients, doctors and nurses; operational factors such as standardization of treatment and standard operating procedures, availability of resources, clinical concerns; leadership and management of the hospital through the pandemic. This case can be used by instructors to teach organizational resilience building in the health-care context.

Graduate- and executive-level courses in managing change during crisis in health-care context; health-care management/leadership.

Teaching notes are available for educators only.

CSS 7: Management Science.

• After working through the case and assignment questions, students will be able to do the following:• Identify the difference between core competencies and dynamic capabilities and how they make a difference in a crisis towards building an agile organisation.• Evaluate the support through a collaborative, temporary, trans-organisational system to local manufacturers to achieve agility and sustainability.• Realise the importance of clear expectations exchange and communication between partners to enhance collaboration, even in temporary structures in increasing agility and sustainability.

The COVID-19 pandemic and subsequent lockdowns created a crisis for South Africa and the President, Cyril Ramaphosa called for urgent collaboration between business, labour and government to meet the demand for locally produced Personal Protective Equipment (PPE) and medical devices. The case illustrates this response and collaboration between government, labour and business through a temporary newly formed structure, called Business for South Africa (B4SA). Ross Boyd, Head of the innovation work stream of B4SA which housed the local manufacturing partnership (LMP) was considering his dilemma of how to be agile in sustaining their support to the South African manufacturers even though the LMP was a temporary structure. The local manufacturers had to repurpose their production lines to produce local PPE and medical devices. How could the LMP support the South African manufacturers to sustain their agility in building capabilities during COVID-19? At the same time, Ahmed Dhai, the Group Executive of Operations of Kingsgate Clothing, which was benefiting from the support of the LMP, was reflecting on his leadership in taking decisions to repurpose production and increase capacity during COVID-19. Dhai was considering his dilemma of being agile during and beyond the COVID-19 pandemic. The case features several decisions taken by Kingsgate and offers students the opportunity to evaluate these decisions given the fluctuations in supply and demand of PPE and the leadership that Dhai demonstrated in how he communicated and dealt with his staff during the pandemic. Students could also give recommendations to Ross Boyd and Ahmed Dhai on how they could lead their organisations to be more agile during and beyond COVID-19.

The case study is suitable for MBA or MPhil level on Strategy courses. The case would also find good application in Organisational Behaviour and Leadership courses on Masters level and Executive Education programmes.

Teaching notes are available for educators only.

CSS 7: Management Science.

Upon completion of the case study discussion, successful students will be able to define and list the steps of time-driven activity-based costing system (TDABC); understand and explain the ideas behind the TDABC; implement the TDABC in customer profitability analysis; draw connections among the cost and profitability analysis; evaluate the importance of better costing techniques in profitability analysis; and make managerial decisions based on TDABC analysis.

Gluten Limited’s financial affairs and operations manager, Fatih, was aware that the company was making very little profit from its operations with its biggest customer. The main reason appeared to be that it delivered its products in bulk to the main warehouses of the customer, which then distributed them to the stores. Fatih believed that products were being sent to stores late, so that their expiration dates passed quickly and they ended up being returned.

The case study documents the past year of Gluten Limited’s delivery operations with one of its biggest customers. It focuses on the effectiveness of its delivery operations and ways to increase profitability by reducing sales returns. The case dilemma involves the choices that Fatih faced following a six-month trial period: either delivering products in bulk to the customer’s main warehouses at lower cost but higher return rates or delivering small amounts directly to stores at higher cost but lower return rates. Fatih needed to decide which mode of customer operations was more profitable and continue that way.

Knowing the importance of determining costs properly in profitability analysis, Fatih made the cost calculations using the TDABC system.

This case was written for use in Cost Accounting and Managerial Accounting classes at the undergraduate level. The focus of the case aligns well with discussions of customer profitability analysis, cost reductions, eliminating non-value-added activities, and profitability of operations. Instructors seeking to emphasize the most suitable costing methods for customer profitability analysis could assign this case.

Teaching notes are available for educators only.

CSS 7: Management Science

1. Probabilistic calculations of cost, and profit/loss using standard probability functions

2. Decision tree to find the expected monetary value (EMV) of different options.

3. Monte Carlo simulation for risk analysis.

4. Risk analysis in project management.

Learners will be able to understand and apply the following: how to approach uncertainty in business decisions using probabilistic calculations of cost, and profit/loss using standard probability functions; how to address uncertainty in business decisions by looking forward and reasoning backward, using the decision tree technique and the EMV of different decisions; how to analyse the risk inherent in business decisions by incorporating probability distributions for all critical variables in the form of Monte Carlo simulation; and appreciation of strategic considerations in risk analysis as it applies to project management

The case describes the challenge facing Vilas Birari, the owner and chief executive of Harsh Constructions, a construction company headquartered in Nasik, India. Birari had to decide on the bid for a construction project in September of 2021, during the COVID-19 (COVID) pandemic. Due to successive waves of the pandemic, the state and federal governments announced lockdowns intermittently, causing uncertainty in costs related to labor, material and project completion. The dilemma before Birari was how to set a bid price that was not so low as to incur a loss and not so high as to lose the bid to competitors. The uncertainty made Birari’s decision-making complex. The case invites students to help Birari find an optimum bid price by using various quantitative techniques, such as Monte Carlo simulation and decision trees.

This case is intended for students of management at a master’s level, in an elective course on management science, which is often also known as decision science. This compact case can be positioned in the second half of the course, when exploring risk management using computer simulation as a tool. The case serves both as an introduction to using simulation to manage uncertainty as well a contrast with simpler methods that are covered earlier in the course.

Teaching notes are available for educators only.

CSS 7: Management Science.

The learning outcomes of this study are as follows:

1. comprehending foundational dimensions of brand equity and criteria to compare the use of traditional and new media in leading brand communication appropriateness and performance;

2. understanding and evaluating implications of leading brand communications during times of crises; and

3. creating recommendations for leading brand communication preparedness and response to crises.

On 16 August 2020, Dr Barbara Jensen Vorster, Senior Executive Manager, Communications and Marketing of the Gautrain Management Agency (GMA), in Midrand South Africa, considered her dilemma of adapting their communication approach during COVID-19 and beyond the current crisis. The GMA relied on traditional media and the crisis created an opportunity to rethink their entire communications approach. It was important to the GMA communications team to keep the Gautrain commuters connected even though they might not be using the Gautrain during the lockdown of COVID-19. Jensen Vorster believed that a brand should be adaptive and continue even when a service is not running. Jensen Vorster had to lead her communications team when they were all working from home, and they had to keep commuters informed of the requirements during the different levels of lockdown in South Africa. Their various campaigns during this time purposefully communicated with commuters and the various “staying home” initiatives with the intention of lifting spirits. The communication outreach during the COVID-19 pandemic switched over to social media communications out of necessity; however, was that ideal communication during a crisis? While most of the case focuses on this external communication, the case pays attention to some internal communication initiatives by Jensen Vorster with her own team and for the Gautrain’s staff. The question is whether brands should shift from traditional media to new media campaigns during the 21st-century crises? Students will get the opportunity to compare the use of traditional and new media during crisis times. How might they approach their brand communications during COVID-19 and in preparation for future crises?

Marketing and Business Communications and Leadership courses for MBA or executive education programs.

Masters level MBA.

The team of authors conducted face-to-face interviews prior to and during the lockdown in South Africa; the interviews were conducted online through Zoom. Interviews included Dr Barbara Jensen Vorster, Senior Executive Manager, Communications and Marketing of the Gautrain Management Agency and Kesagee Nayager, the Marketing and Communications Executive Manager at Bombela Concession Company. Viwe Mgedzi, Executive Manager for Knowledge Management, provided documents supporting the case. The researchers also conducted desktop research of secondary data, including media and press articles on the companies. The @Gautrain Twitter feed was very important for the researchers to investigate as part of the secondary data research, to triangulate the interview data.

For example, see one of the Twitter feeds on 17 March 2020, 5:37 pm.

The following Twitter feed on the Gautrain’s status confirmed the interview data: https://twitter.com/TheGautrain/status/1239938937885466633

The main resources of this case study were the interviews and the media articles to offer objective references. The authors used the following two newspaper articles to triangulate the information they gained from the interviews:

BusinessTech, March 18, 2020, accessed March 8, 2021 at https://businesstech.co.za/news/lifestyle/382707/south-african-coronavirus-cases-jumps-to-116-as-a-gautrain-exec-tests-positive/

Timeslive, www.timeslive.co.za/news/south-africa/2020-03-17-staff-in-self-isolation-after-executive-tests-positive-two-gautrain-stations-chemically-decontaminated/

Teaching notes are available for educators only.

CSS 7: Management science; CSS 8: Marketing.

1. What are public goods? What are the defining characteristics of public goods?2. What is special about managing common resources like Markhors/Ibex (and other rare species)? What is the free rider problem?3. How the incentives-based system works?4. What are the consequences of Community Trophy Hunt Program (CTHP) in Pakistan?

Learning objectives are as follows:1. applying new approaches to manage common resources;2. understanding the various types of goods that society needs for its material progress;3. understanding the challenges associated with the management of common resources because of their particular nature; and4. understanding the need for incentive-based engagement in the management of public policies at the community level.

Management of shared resources is challenging. This case uses the problem of a forest officer who was given the task of managing the animal population of the region. The primary focus of the case is common resources and how it can be managed through incentive-based system. The case demonstrates how individual actions have external effects. These external effects are sometimes good for the community, but sometimes, they are bad. Many desirable outcomes require social cooperation, but they cannot be achieved because individual self-interest dominates collective well-being, the issue called Prisoners' Dilemma. Gulnar (the fictional forest officer) was convinced about the potential of managing common resources by means of a CTHP in the Gilgit–Baltistan region (in Pakistan). The CTHP provided not just environmental benefits but also substantial social and economic benefits to the local community. The financial gains from the initiative can be used in community projects that help locals become less reliant on their natural environment, create more space for wildlife and enhance the quality of life for people.

BS (Hons.) Economics, MS Economics (Public Policy), MBA (Business Economics)

Supplementary materials teaching notes are available for educators only.

CSS 4: Environmental Management

▪ Students learn how an educational institute impacts water resources on the campus and its surrounding community.

▪ Students acquire knowledge on how decision-making, related to natural resources, is influenced by the institute’s obligations towards surrounding communities and the long-term sustainability of the resources.

▪ Students become acquainted with the decision-making process adopted by an educational institute for achieving resource-efficient development on the campus.

▪ Students learn how to design evaluation methods for investments related to water conservation at an educational institute.

▪ Students become proficient with the payback method specifically when evaluating water-enhancing projects at an educational campus.

Dr Ajit Parulekar, Director at Goa Institute of Management (GIM), Goa, India, was evaluating options to improve the sources of water at GIM at the beginning of 2021. He was reviewing the projects proposed to meet the water requirement at the campus for the next five years (2021–2025). The projects were recommended by consultants (ENV Consultants Pvt Ltd) who proposed a total expenditure of US$68,667 which involved storage enhancement and water table upgradation (See Case Exhibit 11). The maintenance department had studied the plans but their projections showed that the execution of these projects and initiatives would still lead to a deficit of water in the future. Dr Parulekar reviewed the reports and weighed the expected tangible and intangible benefits from the proposed projects. The projects had to be carefully selected, keeping in mind the multiple objectives to be met: an increase in water supply within a short time, a financially optimum investment and a minimum impact on the surrounding community. The selected projects had to meet the long-term sustainability objective of resource efficiency at the campus.

Students studying finance, project appraisal, campus sustainability at graduate or postgraduate management programs.

Teaching notes are available for educators only.

CSS 4: Environmental Management.

This case study was intended for MBA/postgraduate level courses, or for high-level executive courses. It provided a complex international business context to analyse the intricacies and dependencies between emerging regions, wherein a company (Grupo M) established an entire manufacturing cluster and invested all its assets in a place that has never hosted any industrial activity – in a country whose culture and traditions differed significantly from those of the neighbouring country that provided the investment. The case included a discussion of the negotiations that a private company undertook with two governments (Haiti and the Dominican Republic) to secure access to the free-zone facilities granted by the importing countries.

The case could be seen as a stimulating international business context to examine central tenets around “shared value creation” (Porter and Kramer, 2011): the practice of creating economic value in a way that also creates value for society by addressing its needs and challenges. As per these authors, there are three ways to create shared value: by reconceiving products and markets, by redefining productivity in the value chain and by enabling local cluster development. The latter is the one best exemplified in this case. Additionally, the case brought intriguing insights on international business that can be related to ethics, corporate social responsibility and its many facets (Banerjee, 2007), as well as concepts around “responsible lobbying” (Anastasiadis et al., 2018).

This case presented the expansion challenges of CODEVI, a Dominican company, which established and operated an industrial (free zone) park in Haiti. Grupo M decided to move its operations when The World Trade Organization eliminated the quota system for apparel imported from the Far East Countries, and its CEO, Fernando Capellán, foresaw that the Dominican Republic would soon become non-competitive. At the time, an agreement between the US and Haiti, which gave preferential access to production from this extremely poor country, was being negotiated. In 2003, there were two sleepy towns at the Haitian-Dominican border: Dajabón, with about 18,000 inhabitants in the Dominican side, and Ounaminthe in Haiti, with about 40,000 inhabitants (with 90 per cent unemployment and over 80 per cent living below the extreme poverty line) on the Haitan side. These two locations were at the heart of a case that narrated how a complex international business operation resulted in an industrial park that has enjoyed considerable economic success, while simultaneously improving dramatically the living conditions of both border towns: Dajabón now has about 35,000 inhabitants and was a booming town, with a prosperous middle class; Ounaminthe now had 170,000 inhabitants (17,000 work directly at CODEVI), and was a city that essentially remained outside the chaos that often plagues the rest of Haiti. Additionally, a major impact of CODEVI was that it stopped the area’s illegal emigration of Haitians to the Dominican Republic, one of the Dominican Republic’s most pressing problems. But as the CODEVI industrial park has no area to expand, a decision must be made to either expand next to the present park, or at one of the three sister towns along the border. Such a park would have to be built from nothing, as was the case for CODEVI almost two decades ago.

MBA, executive and postgraduate.

Teaching notes are available for educators only.

CSS 5: International Business.

(i) To determine the push and pull factors for a developing country SME to internationalize via exports. (ii) To evaluate the use of social networks in the internationalization journey of Yew Chian Haw (YCH). (iii) To analyse how a developing country SME adapts to local conditions in order to sustain and grow the business in a foreign country.

Yew Chian Haw (YCH) was a small and medium enterprise (SME) producing herbal and healthcare products in Penang, Malaysia. This case study traced the company's internationalization journey, focusing on how the owner used his social networks based on common ethnic ties and language to penetrate the external markets by establishing trading companies in each of his export destinations, from Singapore to Hong Kong and later to Taiwan and China. These internationalization activities also helped him cultivate deeper local networks and enhance his business opportunities in each investment destination. The social network approach has important implications for SME firms such as YCH. The network strength helped to overcome entry barriers to foreign markets and enabled YCH to tap into local complementary resources such as local networks to sustain the internationalization process. Yew’s successful internationalization journey prompted him to focus on the external market for his company’s herbal soup products. But now he must decide whether to continue the internationalization journey in the existing external markets he has penetrated or to expand towards other markets such as Northeast Asian markets like Japan and Korea, as these countries have high income and purchasing power. However, Yew has no extensive social network in both countries, especially in terms of ethnic ties and common language. Yew therefore, had a dilemma: should he just continue expanding the existing external markets he has successfully penetrated, or should he move forward and seek to enter new markets where his current social networks may be weak or non-existent?

This case study is relevant for DBA, MBA, Master and undergraduate (International Business and Business Economics) students

Teaching notes are available for educators only.

CSS 5: International Business

The purpose of this case is to expose readers to the dilemma of expanding domestically or internationally and simultaneously taking key decisions while expanding the business to the international markets. It could be a foundational case for understanding international expansion and growth strategies.

After the case analysis, students would be able to:

• understand the potential of the domestic market and the factors affecting the international expansion;

• evaluate the various methods to enter an international market;

• identify the challenges of expanding a business into emerging markets such as India;

• analyze the various growth and expansion strategies in an emerging market such as India; and

• assess the online promotion strategies in an emerging market.

NIVA, The Satin Collection, is a manufacturer and distributor of a luxury collection of silk and satin products. Founded in 2020, NIVA is based in Dubai with more than 1,000 customers. The products include silk bedding, silk sleepwear, fashion accessories and reusable satin masks, and they are made-to-order, custom-made and tailored locally in Dubai. Currently, all the operations are run and managed by the company’s founder, Purva. The only operation which is outsourced is the stitching process. The company is completely operating online and is currently promoting products only through social media platforms such as Instagram and Facebook.

Purva is planning to expand her business. The two options are extending her existing operations in the UAE and expanding to other emerging markets, starting with India. Purva needs to decide on a suitable internationalization strategy to decide whether it is the right decision to enter the Indian market, including an entry and promotion strategy in her target market. In addition, she needs to decide whether to continue with NIVA’s current business model in India. There might also be additional possible challenges for NIVA in entering the Indian market.

Postgraduate MBA students, other graduate-level management programs and undergraduate-level students.

Teaching notes are available for educators only.

CSS 5: International Business.

Students comprehend the importance of the transformational idea and apply it in their leadership. Students can analyze how to spread the transformational idea across the team and the organization. Students understand the value of working with different stakeholders (partners, headquarters). Students can analyze the role of focusing on a client and apply client-centric way of thinking. Students can apply the concept of the transformational idea to create (synthesize) possible solutions for the presented dilemma.

This case tells the transformation story of the logistics company Ekol Ukraine, which began in 2013. This company was the most successful branch of Ekol Logistics, an international corporation operating in 13 countries. From 2013 till 2021, Ekol Ukraine experienced a crisis related to the start of a conflict between Ukraine and Russian militants. It proved its ability to cope with challenges, gained almost complete autonomy from the head office, transformed the business model and culture and achieved considerable success in building an ecosystem.

Having this stage of transformation completed by 2021, the company reached a plateau and had to decide what the following changes would be. In 2021, only 14% of Ukrainian businesses used outsourcing logistics services (like the ones Ekol Ukraine provided). The remaining 86% had in-house logistics and were not ready to change the model. So, Ekol Ukraine faced a problem: how could a logistics provider grow in a market that was not mentally ready to outsource?

MBA programs.

Teaching notes are available for educators only.

CSS 7: Management science.

The value of the DeLone & McLean model for planning actions before IS design and implementation can guarantee its success.The value of the DeLone & McLean model for IS auditing in critical dimensions of project success, including both hard and soft elements.Information and information systems are essential organizational resources that must be viewed in an interconnected way with the rest of the organization's resources and capabilities that systemically guarantee the achievement of the export objectives.The role of management commitment in the success of voluntary Information Systems.

The case deals with Luis's decision to continue a Competitive Information System project. For his PhD research project, Luis designed and implemented an information system to support the export goals of the business school for which he worked. Three months later, the System obtained positive feedback and user satisfaction but deficient System usage levels. Luis does not know whether to continue with the project or not. If he decides to continue, further steps are needed to increase the System's use for contributing to the export goals.

The case is suitable for use with MBA students and executive education short courses.

Teaching notes are available for educators only.

CSS 5: International Business.

At the macro level, the case study enables the students to appreciate the complexity emerging market economies face in achieving economic development and environmental sustainability without comprising each other. The students understand the importance of behavioural change and empowerment of communities in projects dealing with transformational social changes. Theoretically, the students learn about the change mechanisms and organisational practices market-based organisations install to drive their positive social change (PSC) projects. At the micro level, students learn about the process of setting up Mangalajodi Ecotourism Trust (MET) – that not only enthused the local community economically but also instilled it with awareness and motivation towards sustaining its ecosystem. Analytically, at macro level, it assists the students to have a lens of PSC framework to examine corporate social responsibility, social entrepreneurship and BoP strategies of market-based organisations to affect social change. Application/problem solving: The case study explains to the students how the PSC levers of motivation, capability and opportunity structures were applied by NatWest Bank during different phases of project execution. As management grapples with new problems, the students are encouraged to use the levers to recommend an action plan. It allows students to apply SWOT and think of competitive strategies for MET. It allows students to think of strategies that may apply for a better management of Ecotourism at Mangalajodi.

As part of its broader commitment to sustainable development and climate change action, the NatWest Group (formerly Royal Bank of Scotland Group) launched its Supporting Enterprise Programme in India in the year 2007. The project aimed at creating income-generating opportunities for indigenous and economically vulnerable sections of society living in critical natural ecosystems. The project was under the leadership of N. Sunil Kumar, a zealous nature lover, with over two decades of experience in business strategy and public affairs and a specialty in environmental sustainability. He headed Sustainable Banking at NatWest and was head of NatWest Foundation-India. The Mangalajodi project shared the problems many of NatWest’s other projects in India presented. Poor communities that relied solely on natural resources for their sustenance slid deeper into poverty as ecosystems degraded. Lacking alternative sources of livelihood and facing scantier resources, the communities helplessly caused additional damage to weak ecosystems when they drew on the resources even more vigorously. Poaching of migratory birds for supplemental income was a huge problem at Mangalajodi; it was not only rapidly altering the ecosystem to sustain the birds but also deteriorating and weakening its ecology as a whole. Measures to eliminate poaching were failing in the absence of alternate means of livelihoods and a strong incentive to protect the birds. MET was established under the project in 2009. A decade later, it had become a resounding success. A community-owned and run enterprise, MET was providing direct employment to over 100 poorest families at the tiny village and creating income-generating opportunities and entrepreneurial ventures for many others. Poaching was practically negligible at Mangalajodi, and the community was drawing huge admiration for its role in conserving the ecosystem. However, the progress of Mangalajodi Ecotourism was paradoxical, on the one hand; its popularity was rising but, on the other hand, it was becoming overcrowded and looked ill managed. Its rising commercial value was bringing in more land developers, builders and investors, but permanent concrete structures were also coming up quite unscrupulously. There were many challenges – how should growth of ecotourism at Mangalajodi be managed? What mechanisms and practices ensured that the community was empowered enough to participate in decisions of land use, infrastructure, energy and waste management at Mangalajodi? How should MET become more competitive and innovative to grow despite future challenges?

The case study is useful for students of Management at Under Graduate and Post Graduate Levels for understanding the following: the sustainability of fragile ecosystems; the community at the intersection of sustainable development and natural resources conservation and protection of biodiversity; knowing in detail about the planning, implementation and management of ecotourism projects; and decisions regarding community-based ecotourism projects.

Teaching Notes are available for educators only.

CSS 7: Management Science

After working through the case and assignment questions, students will be able to do the following: • Analyse the aspects of strategic leadership and evaluate effectiveness of the leadership in the case study. • Identify stakeholders in a large-scale project and differentiate between their needs and sources of power. • Establish what behavioural mechanisms can be used by leaders to gain support from stakeholders with seemingly divergent pro-poor and pro-growth development orientations for expansion in an emerging market context. • Generate recommendations to communicate the benefits of expansion plans.

On November 8, 2019, Jack van der Merwe, the chief executive officer of the public rapid rail organisation, Gautrain Management Agency (GMA), was considering how to influence stakeholders to support the pace of the expansion planning phase, without alienating the surrounding communities and balancing the various and sometimes opposing stakeholder interests. The case highlights the background to this dilemma in offering the financial background of the Gauteng province and the evolution of the Gautrain project in the context of an emerging market country characterised by institutions at different development levels and how the unique characteristics of the protagonist could influence stakeholder orientations. The case illustrates how the Gautrain is at the centre of a complex transport conflagration in the South African transport ecosystem. Specific stakeholders and their needs are exposed in the case to enable students to analyse their several levels of influence on the project and proposed expansion. The differences between pro-poor and pro-growth development orientations are also highlighted in this case as input to describe the dilemma Van der Merwe faced in his influencing role in this particular South African context. Students will gain insight into how to manage the tensions between pro-poor and pro-growth orientations.

The case is suitable for a graduate-level course on strategy; organisational behaviour; or leadership. The case is also suitable for a post-graduate-level course on an MBA or MPhil program on strategy and leadership.

Teaching notes are available for educators only.

CSS 7: Management Science.

This case allows students to critically analyse the business model of Zomato which is a multi-sided platform/in the foodtech industry. It helps students to critically analyse how firms enter into the global market to create value and maintain dominance over the local market (especially in a large market such as India). The case can also be used to introduce students to the business canvas model by analysing foodtech start-ups. The outcomes are as follows: to understand the Business Model Canvas as a tool to describe and analyse the foodtech business such as Zomato’s, based on its value proposition and the way it sells its services; to conduct a value chain analysis and analyse the business models adopted by foodtech companies; to understand how Zomato can aim at global value creation; and to design a clear growth strategy and evaluate Zomato’s options to internationalize or expand locally.

The year 2018 was an important year for Zomato as it geared up to chart new heights amidst the changing dynamics of the industry on one hand and a co-founder exiting the company on the other hand. Zomato was incepted in 2008 as a restaurant discovery platform offering users the ability to access restaurant menus and post online reviews. It provided a range of value-added services for both its restaurant partners and end customers. Its vertical integration enabled it to grow its revenues across its three lines of business, namely, dining out, delivery and sustainability. Zomato was an early internet start-up that expanded rapidly in the international markets. In the past ten years, the company both scaled and rolled back its operations with unique lessons learned in each market that paved its path for success both locally and globally. The domestic market was being dominated by a few large players sharing the market. Reports by market intelligence firms showed that Swiggy, the closest competitor was starting to dominate Zomato in India [1]. Deepinder, CEO, Zomato’s dilemma for adding value and increasing revenues by weighing options of whether the company should strengthen its presence in the domestic market, or, venture into foreign markets or serve both local and foreign markets.

This case is appropriate for postgraduate courses in Strategic Management or International Business.

Teaching notes are available for educators only.

CSS 5: International Business.

Learning outcomes are as follows: Students will understand the main characteristics of Agile leader and importance of these characteristics in successful change management. Students will understand how Agile leader works to manage changes in organizations and what steps the leader must take to make successful changes in the organization. Students will know in details the Kotter change management model, will recognize and will be able to apply this model in real-life situations.

The case study is about the College of Business Administration (CBA). The CBA is a private higher education institution located in Riga, Latvia, Eastern Europe. The CBA provides professional higher education programs. The case study tells the story how Susan was at first hired as free-lancer for specific tasks at the College in 2017. After successful competition of these tasks, Susan was hired as the new director in 2018. The management at the College was almost non-existent at that moment, and Susan had to face the question how to develop the CBA and make it profitable. Susan had to build her management team, had to review and describe all processes and had to build the internal culture of the organization. Susan implemented change management plan, and in four years, the number of students and lecturers at the College had doubled, and the turnover of the CBA had reached more than one million euros. The case study shows Agile leader characteristics and change management process in details.

Undergraduate studies.

Teaching notes are available for educators only.

CSS 7: Management Science

Following discussion and analysis of the case, students should be able to explore how an individual’s background affects his/her perspective on entrepreneurial opportunities; analyse leadership behaviours that support an innovation process; and understand that constraints can enhance innovation.

This real-life case explores the main protagonist, Joni Brenner, an arts university professor at the University of Witwatersrand (Wits) in South Africa, and how over the past 10 years she worked with a group of co-operative beaders in Zimbabwe who developed hand loomed necklaces that were sold locally and internationally, placed in the African section of museum stores.The case provides an opportunity to explore the evolution of the Marigold product, the characteristics of an entrepreneur and how innovation can come from a very focused and constrained approach. Brenner’s involvement with the co-operative involved the supply of materials, design innovation and product sales. Innovation had come through focusing on the evolution of the core product, through different designs and colour combinations, learning through mistakes and through other artistic collaborations. The case concludes with Brenner questioning whether the innovation approach should be adapted to meet the needs of a potential new customer.

This case is appropriate for undergraduate, graduate and post-graduate, MBA and executive education students focusing on entrepreneurship, small business development and/or innovation.

Teaching notes are available for educators only.

CSS 7: Management Science.

Determine when to resolve conflict through arbitration and when to resolve conflict through the court system. Reflect upon the types of organizational misconduct and determine what behaviors constitute organizational misconduct. Argue whether the behaviors that constitute organizational misconduct are universal or may vary according to the context. Analyze whether actions that might be considered misconduct might be acceptable in certain situations and contexts. Build additional definitions of organizational misconduct that might pertain to non-Western, developed country contexts. Analyze how media and popular opinion might influence perceptions of organizational misconduct.

Carlos Mattos (he/him/his) was the founder/president/CEO of Hyundai Colombia Automotriz S.A. from 1992 to 2015. He and his company introduced the Hyundai brand to the Colombian market and made it one of the best-selling automobile brands in the nation. When the company began experiencing losses, Hyundai headquarters terminated the contract and awarded the distribution to an Ecuadorian firm.The contract between Hyundai Colombia Automotriz S.A. and Hyundai Motor Company stipulates that arbitration is the appropriate dispute mechanism. However, Mattos contemplates whether arbitration is his best option or if he should take Hyundai Motor Company to court. He also contemplates suing the Ecuadorian firm for unfair competition.As students analyze Mattos’ decision, they will determine whether the actions of the any of the parties might be considered organizational misconduct. This case is not about assigning blame. It is not about deciphering whether anyone is guilty. Instead, the case is designed to promote critical thinking about the concept of organizational misconduct. Most literature and understanding of organizational misconduct are from a Western, developed country point of view. In this case, there are three key actors, all from emerging markets. Each may have participated in some sort of misconduct, depending on how the term is defined.

This case is appropriate for advanced, undergraduate or master's level international business students in classes such as international management, intercultural management, international negotiation or business ethics.

Teaching notes are available for educators only.

CSS 5: International Business.

The learning outcomes are as follows: Understand the concept and characteristics of Bottom of Pyramid (BoP) markets; understand the concept and characteristics of frugal innovations; understand the Design Thinking approach to product design and how it might be useful to develop frugal innovations for BoP markets.

The case details the journey of a group of students at a premier engineering college in India. The group aimed to develop and implement a social innovation that addressed a serious and important health issue – menstrual hygiene practices among urban slum dwellers in India. The case begins with how a chance visit to an NGO inspired a pair of students to take up this issue, how the project unfolded at their college, the challenges faced in their journey and, finally, an outcome that was only a partial success. It raises important questions of challenges that are specific to bottom of pyramid markets in emerging economies. The case can provide a context for discussions on approaching frugal innovations from a Design Thinking perspective.

This case can be used in social innovation courses/modules at an undergraduate or graduate level in social innovation and social entrepreneurship courses. The case is best positioned towards the beginning of the course as an overview of the process of Social Innovation, and to discuss the relevance of concepts of BoP markets and frugal innovation.

Teaching Notes are available for educators only.

CSS 7: Management Science.

After working through the case and assignment questions, students will be able to critically analyze a firm's international partnership strategies for its export market; assess international markets and a firm's entry strategies in them; identify various problems that a firm can face in international markets; and recommend strategies for growth in international markets.

Bajaj Auto's (BA) strategy to be a global motorcycle manufacturer had enabled it to hold its ground in the difficult times posed by the COVID-19 pandemic. For the first time, two-wheeler exports from India between January and May 2021 were equivalent to domestic sales showing increased exports and decreased domestic sales. This reinforced BA's belief in its global expansion strategies. Rakesh Sharma (Sharma), the Executive Director at BA, was increasingly buoyant of BA's ambitious plans to enter new markets in Latin America (LATAM) and South-East Asian (SEA) Market.Sharma knew very well that though the LATAM and SEA markets were up-and-coming and lucrative, there were innumerable challenging factors pertaining to Indian and foreign competitors, domestic and international economic and business environment, supply chain and logistical issues, as well as uncertainty brought by the COVID-19 pandemic that BA had to face before tasting success in these markets. Was BA moving in the right direction with its global business expansion strategies? Would Sharma be able to handle the challenges and successfully take BA toward its goal?

The case can be taught in advanced undergraduate, MBA or executive-level programs.

Teaching notes are available for educators only. Please contact your library to gain login details or email support@emeraldinsight.com to request teaching notes.

CSS 5: International Business.

After working through the case and assignment questions, students will be able to: understand how product markets in a given global region are to be analysed and assessed; assess various dimensions of consumer behaviour that would impact the strategies of a firm under consideration; identify how a firm can create its brand image and value proposition in a given international market; and evaluate and categorize various threat dimensions that a firm would experience in an international market.

Bajaj Auto (BA) was India’s largest two-wheeler exporter, with ongoing exports to more than 75 countries worldwide. Besides being in other regions of the world, BA’s foray into the African market had been very successful, and it was growing from strength to strength in this market. BA’s motorcycles, three-wheeler rickshaws and small commercial vehicles had been successfully plying the roads of many countries in Africa such as Egypt, Nigeria and Kenya.

Rakesh Sharma (Sharma), the Executive Director of BA, knew very well that Africa was a high-risk-high-gain market for BA. Intense competition from Indian and international two-wheeler and three-wheeler manufacturers, global supply chain and logistics issues, various economic and legal challenges, and the threat of losing African consumer patronage were the challenging issues that Sharma was facing in this market. Would Sharma be able to effectively assess the market environment and consumer behaviour prevalent in the African countries? Would he be able to recognize BA’s brand and value-propositions and identify the international marketing challenges threatening BA’s smooth ride in this market?

The case can be taught in advanced undergraduate, MBA or executive-level programs.

Teaching notes are available for educators only.

CSS 5: International Business.

The learning outcomes are as follows: to explore the challenges associated with Information System Project Management; to explore how to navigate certain Information System Project Management challenges and make recommendations on how to address them; and to evaluate the application of user-centred design.

This case looks at the small to medium enterprises (SMEs) Digitisation project that was initiated by Dr Ndiege, Assistant Professor of Information Systems, and a team of faculty at the School of Science and Technology, United States International University – Africa in Kenya. Dr Ndiege is considering the project in September 2020 and its future viability. The project called for computer science students to voluntarily assist in developing an online presence for local SMEs. The idea is to help cushion them against the shocks of the COVID-19 pandemic. Dr Ndiege looks at the details of the project through the eyes of team leader Sylvie Sarabwe and her encounters on the project. She leads a team of four students in a user-centered design to develop a website for social enterprise Kraft Therapy Foundation (KTF), located in Kibera slums within Nairobi County, Kenya. Sylvie must navigate the client relationship with KTF. But she soon starts to experience the difficulties involved with navigating this process. For Sylvie, it quickly dawns on her that a user-centred design project requires both hard and the soft skills to successfully deliver the final project. By the conclusion of the case, Dr Ndiege recognises the multitude of issues that this project ultimately faces.

The primary target audience for this teaching case is undergraduate information technology students, especially students in software application design and project management with little or no work experience. The case is clearly structured and the length of the case lends itself to the audience. It does not contain excessive or irrelevant information. Hence, learners have more time to focus on the application questions presented.

Teaching notes are available for educators only.

CSS 7: Management Science.

Through this case, the students will be able: to study how developments in the external environment impact businesses, in general, and banking sector, in particular, banks/banking, environmental management, financing/borrowing, government, political business risk and politics; to identify the politico-legal constituents of the external environment which significantly influence businesses; and to analyse the pros and cons of loan-waivers as a policy decision on various stakeholders including banks, borrowers, governments as well as the larger society.

The case is symptomatic of the dilemmas faced by the Indian bank employees, in charge of loan-disbursals, torn between seemingly contradictory demands from their top management and the governments.

The case is meant to be used in the course on “Business Environment” both at the UG and PG levels. It can be used along with the module on “External Environment and its Constituents” to augment students’ understanding of the “Impact of Political Environment on Business.” The case can also enrich the class discussion on the PEST (politico-legal/economic/socio-cultural/technological) framework for analysing the forces in the external environment acting upon a business.

Teaching notes are available for educators only.

CSS 4: Environmental Management.

The case depicts an opportunity for students to be exposed to the decision theory concept. The study aims to encourage them to use the data given in the case and exhibits to explore as follows: decision-making under uncertainty; decision-making under risk; compare and contrast uncertainty and risk; and evaluate the value of perfect information EVPI and understand its application in decision-making.

Vikas Teerth, a budding entrepreneur, wanted to venture out into the pineapple business. He had three land plots available, but he would like to take up a single plot after analyzing the possible returns factoring the volatile prices and other impending constraints. He wanted to use the decision-making approaches with the aid of probability to arrive at the best decision. This case helps the instructors to introduce the concept of decision-making under risk and under uncertainty which comes under the preview of decision theory. Students can use the data given in the case and exhibits to do the necessary calculations required and thereby get an insight into the process of calculated decision-making.

This case can teach decision theory in undergraduate-level and graduate-level courses in operations research, decision-making and industrial engineering. It can also be used to discuss issues and challenges faced in start-ups or SME entrepreneurship.

Teaching notes are available for educators only.

CSS 7: Management Science.

An interview was conducted with the general manager and semi-structured interviews with Likert scale to the main clients, collaborators and suppliers to establish the key competencies of the firm. Secondary information was collected through the organization’s historical and strategic documents.

At the end of the case study, students will be able to learn international marketing, innovation, strategic management, international business strategy; analyze the brand equity construct through the associative neural network model for decision-making; determine the internationalization strategy using the dual pressures model and sources of competitive advantage for international marketing management; and propose the innovation of a product by applying creativity techniques or innovation models to enter international markets.

Café Galavis is a family business leader in the production and commercialization of roasted and ground coffee for 103 years in Colombia. The new chief executive officer recovered the financial stability during his management during the period from 2015 to 2019, implementing internationalization processes. However, the sanitary crisis caused by the COVID-19 pandemic in 2020 in Colombia, generated an economic recession, which led to a decrease in coffee consumption. How to innovate in the development of a product or service in times of pandemic? What internationalization strategy implement? These are the challenges that the new management and its collaborators will confront.

The teaching case is aimed at students of postgraduate academic programs in areas Management or MBA. In the modules of Marketing the case allows the orientation of the concepts of brand equity or branding. Likewise, in the modules of International Management, the definition of the internationalization strategy through the analysis of dual pressures and sources of competitive advantage. Finally, in the modules of Innovation different methodologies or techniques for innovation can be applied such as: SCAMPER, Design thinking or the Stage Gate Model.

Teaching notes are available for educators only.

CSS 5: International Business