Case studies

After completion of the case study, the students will be able to understand lead and lag indicators, understand job performance and its linkage with job satisfaction, calculate the cost of turnover and design solutions to the problem of attrition and low satisfaction.

Pace Control Gears was a small-scale enterprise based out of Sonipat, India. It was an entrepreneurial venture by Rajesh Kumar, who had set Pace in 2010 to manufacture low-voltage electrical apparatus. Recently, Pace had begun to experience issues with quality control that were largely the result of human error. The company was facing a drop in satisfaction levels and higher attrition levels among the employees. Kumar had to find a solution quickly to address the problem, as it had direct implications for the company’s margins and the assurance of quality that it was associated with in the market.

This case study is suited to undergraduate and postgraduate courses in human resource management and general management.

Teaching notes are available for educators only.

CSS 6: Human Resources Management.

The learning outcomes are as follows: to analyse the issue(s) presented within specific case study context (C4); to formulate solutions to identified issue(s) within specific case study context (C5); and to synthesise a group plan to solve issue(s) within specific case study context (A4).

In 2017, China proclaimed that it would no longer accept plastic waste for recycling, this was in-line with China’s Operation “National Sword” to review the quality of these plastic imports to ensure their recyclability. This sent shock waves through a now globalised recycling network, with China previously having imported 95% of the EUs and 70% of US plastics that had been collected for recycling. This plastic backlog was then diverted to South-East Asian nations, particularly Malaysia, which this case focuses the discussion upon. While the potential for significant economic benefits drew the attention of illegitimate and unscrupulous businessmen alike, the environmental degradation from the often, low technological recycling processes and even burning of low-grade plastics brought profound negative impacts. This case focuses upon, then Minister, Yeo Bee Yin who led the Ministry of Energy, Science, Technology, Environment and Climate Change, in which she took an active and aggressive stance in attempt to stop Malaysia becoming the dumping ground for the global plastic crisis.

This case is appropriate for final year undergraduate and any postgraduate degrees in Business.

Teaching notes are available for educators only.

CSS 4: Environmental Management.

By the end of this case study analysis, students are expected to understand the dynamics of global markets by identifying institutional voids in prospective export destinations using the framework by Khanna and Palepu; evaluate potential export destinations for Nablus Soap Company (NSC), taking into account the identified institutional voids and their implications for market entry.

Formulate strategies for NSC to address institutional voids and manage exports effectively to the selected country.

Assess various global expansion strategies beyond exporting for NSC, examining their respective advantages, disadvantages, and feasibility within the context of the company’s goals.

Analyze the factors that contributed to NSC’s successful expansion into 72 countries, despite the longstanding challenges faced by Palestinians since 1948, including the recent impact of the 2023 situation in Gaza on the West Bank.

This case study provides students with an in-depth understanding of the Palestinian economy, focusing on the NSC, a small and medium enterprise in the olive soap industry. Founded by Mojtaba Tbeleh in 1971, NSC’s legacy spans 400 years. It is known for crafting handmade, 100% natural soap with olive oil as a key ingredient. As of November 2023, NSC has successfully expanded its exports to more than 72 countries. Despite this achievement, the company faces significant challenges due to various restrictions, particularly those imposed by occupying forces. The case study provides insights into NSC’s international expansion challenges, guiding students in understanding how institutional voids in potential expansion destinations impact market entry decisions. It encourages them to identify these voids select appropriate markets and formulate strategies to leverage NSC’s global expansion potential.

This case study is suitable for undergraduate- or postgraduate-level students.

Teaching notes are available for educators only.

CSS 5: International business.

The learning outcomes are as follows: to identify and analyze the importance of operations management in a situation demanding minimizing environmental impact and maintaining operational momentum; access the risks faced during project executions and apply project management concepts to facilitate Karachi Steel in implementing indigenous technological solutions; and evaluate the importance of adaptability, continuous improvement and innovation in creating sustainable solutions to address complex challenges.

Javaid Iqbal, CEO of Karachi Steel, was the case’s protagonist. With capacity expansion, Javaid relocated the steel facility from Rawalpindi to Islamabad, Pakistan. The company encountered several difficulties because of the air emissions’ inconvenience to nearby residents and the strict environmental regulations. To push the emissions into the air, the company first installed a locally fabricated chimney. Later, they hired a foreign Pakistani engineering firm to install air filters, but the project proved unsuccessful. To control emissions, the company developed a Wet Particulate Control (WPC) system based on a water-sprinkling mechanism. The endeavor was successful, but it resulted in water pollution. As a result, Karachi Steel signed a contract with a local engineering company that invented and effectively installed an air filtration system. Karachi Steel not only devised solutions for their predicaments but also made significant contributions toward achieving the Sustainable Development Goals (SDGs). However, the emissions reporting and monitoring mechanism continued to cause inconvenience for regulators. In addition, the filtration facility encountered a blocked duct conveying zinc sulfate from smoke, resulting in the periodic suspension of operations. As Karachi Steel seek long-term solutions to current challenges, it is critical to examine the relationship between internal circumstances and external forces and stimulate a holistic approach to resolving issues within the realms of operations management and project management.

The case study is suitable for students pursuing their undergraduate degree programs in business studies or management sciences. This case can be taught in specific subjects in the domain of management sciences, including project management and operations management. Furthermore, undergraduate students pursuing degrees in environmental sciences, specializing in environmental impact assessment and sustainable development, can also learn from this case study. These subjects have the potential to provide students with a detailed understanding of the dynamic relationship between environmental problems caused by business activities, and how to address these challenges using principles of project management and operations management. There is no pre-requisite for this case study, and the level of difficulty is moderate. The recommended teaching pedagogy for this multidisciplinary case study includes role-playing exercises, simulations to replicate real-world situations and the Socratic method, which encourages critical thinking.

Teaching notes are available for educators only.

CSS 7: Management Science.

Following a discussion of the case, students should be able to analyse competitive dynamics: provide an in-depth critical analysis of Ilco Farming’s microenvironment, using the structure–conduct–performance framework; evaluate strategic positioning: conduct a SWOT analysis of Ilco Farming’s medicinal cannabis business; and develop strategic approaches: propose actionable strategies that would provide effective solutions to the problem of constrained market conditions currently faced by Ilco Farming.

Coenie and Ilse Venter established Ilco Farming, a cannabis farm located in the Viljoenskroon district in the Free State province in South Africa, in 2021. From the beginning, they poured their hearts and souls into their new venture, which soon paid off. A few short months after Ilco Farming began operating, despite the presence of other large competitors, Ilco Farming supplied a large share of the domestic medicinal market with flower heads. But then an unexpected challenge presented itself. In March 2023, Ilco Farming was operating at only 23% (600 m²) of its production capacity of 2600 m² and had considerable room for growth, the local market – at least the local legal market – for cannabis began to show signs of saturation. Coenie and Ilsa found themselves at the proverbial crossroads, grappling with the crucial decision of how to secure their farm’s future in the face of a fast-saturating local (legal) cannabis market and a thriving (illegal) black market. Coenie and Ilse refused to entertain the idea of going the black market route, as they were unwilling to risk losing their operating licence. They calculated that the farm would reach breakeven point within the next two years, with profits unlikely during this period. Should they persist with their current strategy of producing high-quality products and delivering a superior service in the hopes of growing their market share? Or should they consider other strategic options? Coenie and Ilse were sitting at their boardroom table having a cup of coffee and looking out of the window at Ilco Farming’s impressive SAHPRA- and GAP-approved warehouse and tunnels. “What should we do?” they both wondered.

The case study can be used in postgraduate courses in microeconomics (PGDIP/MBA) and agricultural economics (PGDIP/MBA).

Teaching notes are available for educators only.

CSS 5: International business.

This case study would enable the learners to identify and evaluate the factors impacting the strategic decision to enter international markets. The learners would be able to identify parameters such as level of competition, perception regarding foreign entrants and demand factors that are crucial for the form to consider while taking such an important decision. The case study will also allow learners to understand the challenges of an entrepreneurial journey.

This case study is an interesting story of two entrepreneurs’ dilemma of internationalization strategy of their firm Aeron. Their firm’s product Tilt Switch had a good international demand and both partners wished to capture this opportunity, post the COVID-19 pandemic. This case study shows how the firm looked into factors to study new international markets, balancing risk and opportunity. The case study highlights the important role of strategic planning in achieving successful internationalization by analysing various approaches to market entry and adaptation. The firm had a choice of either developing their domestic market India or going for international markets of the USA or European Union.

This case study is suitable for graduation and postgraduation courses.

Teaching notes are available for educators only.

CSS 5: International Business.

Specific teaching and learning objectives include to identify factors influencing market expansion decisions and recommend appropriate entry modes, understand factors in the international business environment that contribute to success or failure of international businesses in developing countries, evaluate strategies enabling international businesses to sustain market presence in developing countries and overcome local competition, analyze the concept of local responsiveness in international business operations and suggest strategies for internationalizing domestic companies from developing countries.

The McDonald’s case examines the challenges associated with market expansion by global brands. The case occurs during the early-globalization era in the 1990s. Barbados, a developing country, is the site for potential expansion. Prospective investors, the Winters, are desirous of establishing a McDonald’s in Barbados. They need to thoroughly analyze the previous experience of McDonald’s against the host country’s current international business environment, e.g. political, economic, cultural and competitive environment. This case analysis provides a framework for understanding the multifaceted reasons behind McDonald’s exit from Barbados, considering the complex interplay of political, economic, sociocultural, technological and legal factors in the international business environment. The case equips the instructor and students to explore the risks of international expansion, particularly in developing country markets. The case study on McDonald’s failure in Barbados highlights the need to thoroughly examine one’s market entry strategy and available information on the host market and be more locally responsive regarding tastes and preferences. The case study also presents essential lessons for firms and planners from developing countries. Local firms innovated and enhanced their operations in response to the threat from the entry of the global fast-food giant. Yet, they did not seek to internationalize once McDonald’s exited the Barbadian market. The case study, therefore, considers strategies firms from developing countries could utilize to penetrate markets from developed countries.

At the undergraduate level, the McDonald’s Barbados case can be used in international business classes to highlight risks in the international business environment and the need for a carefully planned and executed market entry strategy.

Teaching notes are available for educators only.

CSS5: International Business.

The primary learning objectives/outcome of case discussion is to apply design thinking principles to design innovative and socially responsible strategies that promote financial sustainability for organizations serving unique societal needs. The secondary learning objectives/outcome of case discussion is to gain a deeper appreciation for the potential social impact of their innovative ideas and understand the complexities and ethical considerations in social entrepreneurship, especially when working with individuals with special needs.

The case study describes the challenge facing Anil Kumar Kundra, the founder and trustee of Autism Ashram and Autism Guardian Village in Hyderabad and Gujarat, an organization that provides shelter and care for individuals with autism and residential facilities for their parents. Autistic individuals often lack social skills and may face challenges in reading, writing and communicating. In addition, they may experience behavioral issues, making it difficult for them to obtain employment or run their own ventures, resulting in a lifetime financial dependency on their guardians. In August 2023, Kundra, in pursuit of sustainability, aims to empower autistic individuals in the ashram to attain financial independence. He envisions Autism Ashrama as a self-sustaining entity, no longer dependent on contributions from parents. The dilemma facing Kundra is the need to identify innovative ideas that will enable these autistic individuals to contribute to revenue generation. The challenges faced by autistic individuals in their day-to-day lives make Kundra’s decision-making complex. While he acknowledges the challenge, he firmly believes that a handful of transformative ideas can bring about a revolutionary shift in the ecosystem for autistic individuals, rendering this business model truly sustainable. The case study invites students to help Kundra identify innovative ideas using design idea techniques, such as the Stanford d.school model.

This take-home assignment is suitable for both undergraduate and postgraduate students and is designed to explore the integration of sustainable business practices and design thinking in a real-world context.

Teaching notes are available for educators only.

CSS 7: Management science.

After reading the case and answering the case assignments, students will be able to understand and explain the challenges and opportunities for engineering, procurement and construction (EPC) contractors and their subcontractors; understand and critically analyse the advantages and disadvantages of insourcing and outsourcing of engineering, procurement and construction in EPC projects; determine which situations merit insourcing or outsourcing within each of engineering, procurement and construction in EPC projects; understand and identify the competencies and qualifications that a subcontractor must possess if any EPC activity is outsourced to them; and develop a decision-making framework to determine which EPC activities must be kept in-house or outsourced in EPC projects.

In mid-March 2021, PetroSahand International Group, a leading EPC contractor specializing in the oil, gas and petrochemicals industries in Iran, encountered significant challenges with its subcontractors in engineering and construction. These issues resulted in widespread repercussions for the company, including project delays and mounting debts. At the peak of these crises, PetroSahand’s senior management embarked on a thorough examination of whether to insource or outsource various aspects of their operations, such as engineering, procurement and construction. Their objective was twofold: to prevent similar setbacks in future projects and to navigate existing projects with minimal disruption to the company’s reputation. To address this critical dilemma, PetroSahand enlisted the expertise of a consulting team from Sharif University of Technology. Comprising esteemed professors, graduates and students from one of Iran’s most respected institutions, this team undertook an exhaustive analysis of the insourcing versus outsourcing debate across EPC domains. Subsequently, they presented their comprehensive findings, thereby confronting PetroSahand’s senior management with a pivotal choice regarding the optimal approach for each activity.

The audience of this work is undergraduate and graduate students who are enrolled in project management courses, both fundamentals and advanced. In addition, this case helps senior managers of EPC contractors gain a deeper and more comprehensive understanding of insourcing or outsourcing different project activities.

Teaching notes are available for educators only.

CSS 7: Management science.

This case study is intended to help students to evaluate Kavak’s business model, examine the global expansion strategy of Kavak, analyze the competitive strategy adopted by Kavak, recognize the ways in which Kavak leveraged technology in all its business operations, examine the key challenges faced by Kavak in the fragmented Latin American as well as global used car market and explore strategies that Kavak can adopt in future to maintain its dominance in the global used car market.

This case study is about the meteoric rise of Kavak, a Mexican used car retailer that aimed to disrupt the emerging pre-owned car markets with its unique value propositions and compelling global expansion strategy. Co-founded in 2016 by Carlos García Ottati (Ottati), in Mexico City, Kavak emerged as an end-to-end solution to buy, manage, sell and finance pre-owned cars. Using pricing algorithms driven by artificial intelligence and machine learning-based inspection tools and personalized recommendations, Kavak reshaped the mobility sector in the Latin American and Middle Eastern regions. In a mere six years of operation, the company established its presence in nine countries: Argentina, Brazil, Chile, Colombia, Mexico, Peru, Turkey, the UAE and Oman. Kavak’s innovative yet simple business model ensured transparency and guarantees in all its transactions where reconditioned vehicles were sold to thousands of customers through its e-commerce platform as well as a network of brick-and-mortar hubs. Its in-house financing arm Kavak Capital was at the core of its business model, as it offered affordable leasing options, making car ownership possible for both first- and second-time car owners within just a few minutes of applying. The platform had an inventory of 40,000 vehicles as of 2023 with more than 50% of Kavak’s sales being financed by Kavak Capital. The case study discusses the challenges faced by Kavak in the fragmented used car market including rising interest rates for vehicle loans, managing capital-intensive operations, rising competition and external economic headwinds such as inflation and slowing economic growth. Going forward, the challenge before Ottati and his team was how to make profits, build customer trust, attract customers and achieve global success.

This case study is suitable for MBA/MS level and is designed to be a part of the business strategy/and international business curriculum.

CSS: 5: International business.

Teaching notes are available for educators only.