Case studies

After completion of the case study, the students will be able to understand lead and lag indicators, understand job performance and its linkage with job satisfaction, calculate the cost of turnover and design solutions to the problem of attrition and low satisfaction.

Pace Control Gears was a small-scale enterprise based out of Sonipat, India. It was an entrepreneurial venture by Rajesh Kumar, who had set Pace in 2010 to manufacture low-voltage electrical apparatus. Recently, Pace had begun to experience issues with quality control that were largely the result of human error. The company was facing a drop in satisfaction levels and higher attrition levels among the employees. Kumar had to find a solution quickly to address the problem, as it had direct implications for the company’s margins and the assurance of quality that it was associated with in the market.

This case study is suited to undergraduate and postgraduate courses in human resource management and general management.

Teaching notes are available for educators only.

CSS 6: Human Resources Management.

The learning outcomes are as follows: to identify and analyze the importance of operations management in a situation demanding minimizing environmental impact and maintaining operational momentum; access the risks faced during project executions and apply project management concepts to facilitate Karachi Steel in implementing indigenous technological solutions; and evaluate the importance of adaptability, continuous improvement and innovation in creating sustainable solutions to address complex challenges.

Javaid Iqbal, CEO of Karachi Steel, was the case’s protagonist. With capacity expansion, Javaid relocated the steel facility from Rawalpindi to Islamabad, Pakistan. The company encountered several difficulties because of the air emissions’ inconvenience to nearby residents and the strict environmental regulations. To push the emissions into the air, the company first installed a locally fabricated chimney. Later, they hired a foreign Pakistani engineering firm to install air filters, but the project proved unsuccessful. To control emissions, the company developed a Wet Particulate Control (WPC) system based on a water-sprinkling mechanism. The endeavor was successful, but it resulted in water pollution. As a result, Karachi Steel signed a contract with a local engineering company that invented and effectively installed an air filtration system. Karachi Steel not only devised solutions for their predicaments but also made significant contributions toward achieving the Sustainable Development Goals (SDGs). However, the emissions reporting and monitoring mechanism continued to cause inconvenience for regulators. In addition, the filtration facility encountered a blocked duct conveying zinc sulfate from smoke, resulting in the periodic suspension of operations. As Karachi Steel seek long-term solutions to current challenges, it is critical to examine the relationship between internal circumstances and external forces and stimulate a holistic approach to resolving issues within the realms of operations management and project management.

The case study is suitable for students pursuing their undergraduate degree programs in business studies or management sciences. This case can be taught in specific subjects in the domain of management sciences, including project management and operations management. Furthermore, undergraduate students pursuing degrees in environmental sciences, specializing in environmental impact assessment and sustainable development, can also learn from this case study. These subjects have the potential to provide students with a detailed understanding of the dynamic relationship between environmental problems caused by business activities, and how to address these challenges using principles of project management and operations management. There is no pre-requisite for this case study, and the level of difficulty is moderate. The recommended teaching pedagogy for this multidisciplinary case study includes role-playing exercises, simulations to replicate real-world situations and the Socratic method, which encourages critical thinking.

Teaching notes are available for educators only.

CSS 7: Management Science.

The primary learning objectives/outcome of case discussion is to apply design thinking principles to design innovative and socially responsible strategies that promote financial sustainability for organizations serving unique societal needs. The secondary learning objectives/outcome of case discussion is to gain a deeper appreciation for the potential social impact of their innovative ideas and understand the complexities and ethical considerations in social entrepreneurship, especially when working with individuals with special needs.

The case study describes the challenge facing Anil Kumar Kundra, the founder and trustee of Autism Ashram and Autism Guardian Village in Hyderabad and Gujarat, an organization that provides shelter and care for individuals with autism and residential facilities for their parents. Autistic individuals often lack social skills and may face challenges in reading, writing and communicating. In addition, they may experience behavioral issues, making it difficult for them to obtain employment or run their own ventures, resulting in a lifetime financial dependency on their guardians. In August 2023, Kundra, in pursuit of sustainability, aims to empower autistic individuals in the ashram to attain financial independence. He envisions Autism Ashrama as a self-sustaining entity, no longer dependent on contributions from parents. The dilemma facing Kundra is the need to identify innovative ideas that will enable these autistic individuals to contribute to revenue generation. The challenges faced by autistic individuals in their day-to-day lives make Kundra’s decision-making complex. While he acknowledges the challenge, he firmly believes that a handful of transformative ideas can bring about a revolutionary shift in the ecosystem for autistic individuals, rendering this business model truly sustainable. The case study invites students to help Kundra identify innovative ideas using design idea techniques, such as the Stanford d.school model.

This take-home assignment is suitable for both undergraduate and postgraduate students and is designed to explore the integration of sustainable business practices and design thinking in a real-world context.

Teaching notes are available for educators only.

CSS 7: Management science.

After reading the case and answering the case assignments, students will be able to understand and explain the challenges and opportunities for engineering, procurement and construction (EPC) contractors and their subcontractors; understand and critically analyse the advantages and disadvantages of insourcing and outsourcing of engineering, procurement and construction in EPC projects; determine which situations merit insourcing or outsourcing within each of engineering, procurement and construction in EPC projects; understand and identify the competencies and qualifications that a subcontractor must possess if any EPC activity is outsourced to them; and develop a decision-making framework to determine which EPC activities must be kept in-house or outsourced in EPC projects.

In mid-March 2021, PetroSahand International Group, a leading EPC contractor specializing in the oil, gas and petrochemicals industries in Iran, encountered significant challenges with its subcontractors in engineering and construction. These issues resulted in widespread repercussions for the company, including project delays and mounting debts. At the peak of these crises, PetroSahand’s senior management embarked on a thorough examination of whether to insource or outsource various aspects of their operations, such as engineering, procurement and construction. Their objective was twofold: to prevent similar setbacks in future projects and to navigate existing projects with minimal disruption to the company’s reputation. To address this critical dilemma, PetroSahand enlisted the expertise of a consulting team from Sharif University of Technology. Comprising esteemed professors, graduates and students from one of Iran’s most respected institutions, this team undertook an exhaustive analysis of the insourcing versus outsourcing debate across EPC domains. Subsequently, they presented their comprehensive findings, thereby confronting PetroSahand’s senior management with a pivotal choice regarding the optimal approach for each activity.

The audience of this work is undergraduate and graduate students who are enrolled in project management courses, both fundamentals and advanced. In addition, this case helps senior managers of EPC contractors gain a deeper and more comprehensive understanding of insourcing or outsourcing different project activities.

Teaching notes are available for educators only.

CSS 7: Management science.

Upon completion of the case study, the students will be able to find the challenges and underlying structures that cause the problem; the students will be able to identify the dynamic variables and develop the interconnection and interlinkages among the time-delayed variables to build the story of the business case; the students could develop the block diagram and could build the system dynamics model using the simulation software STELLA, and if they do not have the simulation software, even then they could have a mental model to understand the problem well; the system dynamics students can design the policies to make the system better behaved and recommend solutions; and the students could make mind maps and develop the mental model and could recommend solutions and way forward to overcome the challenges and solve the issues.

Tradeasia is a small-scale manufacturing firm that had started its business activities near Sundar Industrial Estate, Raiwind, in September 2007. The company’s prime focus was to buy the potato starch from chips manufacturing companies and, then, extract the potato starch from the waste potato using its own machinery and sell it as a sizing agent to textile mills. Quality characteristics in terms of better millage and enhanced gullibility made it compatible with Rafhan corn-based starch. The major challenge linked to potato starch was its degree of wetness; the potato starch either extracted from rotten potato or procured from the potato chips manufacturing companies had a high degree of wetness and moisture content. Wet potato starch sometimes had more than 60% moisture content, which was really a challenge. Owing to the high degree of wetness, the wet starch was prone to fungus growth, and within hours, the fungus created toxins if it was not dried immediately, and then after 24 h, toxins acquired a black colour, and they became hardened like pebbles. The starch then was unusable even for sizing purposes for textile products. Reduction in the degree of wetness was really a big challenge and demanded prompt action and high productivity of the operational staff to make that product dry for sale purposes. This was the biggest challenge that ended up in huge inventories of wet starch. Capacity constraints and operational inefficiency killed the company’s productivity and affected the company’s profit.

This case study is written and developed for MBA and MS-level supply chain students of the system dynamics course or those studying management of supply chain complexities. This case study discusses the operational challenges while running the business; huge inventories, capacity constraints and inefficiency in production operations were the challenges associated with almost all manufacturing industries. This case study discussed not only why such challenges are appearing in the business but also the solution that resided in the wisdom shared by the employees in the board meeting. An integrated system dynamics model could be used to design the policies to overcome such challenges. Even the block diagram of the model and causal loop diagram could help to conceptualize the problem and explore the way forward.

Teaching notes are available for educators only.

CSS 7: Management science.

The case study will encourage reflection on the challenges that organisations face in attracting, engaging and retaining knowledge workers that are critical to their performance and growth. It is set in the context of innovative, high-tech organisations whose success is heavily dependent on the performance of information technology (IT) professionals, a specialised and heavily demanded workforce.

The case study depicts the struggle of Manoel Almeida, Descomplica’s chief technology officer, to reverse the scenario of demotivation and high turnover among IT employees and to attract new talent. The case study addresses the themes of knowledge worker attraction, engagement and retention, with a focus on IT professionals.

This case study is designed for undergraduate and graduate education programmes/courses.

Teaching notes are available for educators only.

CSS 7: Management science.

After completion of this case study, the students will be able to comprehend the importance of communication in managing change, examine the role of processes and systems in implementing change management initiatives at a large scale, assess the effectiveness of various strategies in mitigating resistance to change and recognise optimal strategies for communication processes and messages with respect to different audience and contexts.

This case study discusses decisions and strategies that led to Indore (a city in the state of Madhya Pradesh, India) becoming India’s cleanest city for the sixth time in a row. The case explores if the various strategies used by the commissioner of Indore Municipal Corporation would continue to succeed in mitigating resistance to change from the citizens of Indore or if the change management strategies needed to be revised. Amidst intensely rising competition from other cities, especially Surat (a city in the state of Gujarat, India), the case delves into the commissioner’s efforts to defend Indore’s claim of being India’s cleanest city for the sixth consecutive time.

This case study is suitable for use in executive modules and management development programs. It can be used for the following courses: ■ In change management course, this case study can cover critical aspects of strategies to mitigate resistance to change and bring about lasting behavioural changes in followers.■ In communication courses, this case study can cover key aspects of communicating the change vision of a leader to a large audience.

Teaching notes are available for educators only.

CSS 7: Management science

This case study covers different concepts related to leadership. It should help students analyze business situations from a leader’s perspective. By the end of this case study, students would be able to understand the role and the characteristics of leadership during a crisis using the 11 dimensions of character framework, map leadership personalities using the HEXACO model to understand the effectiveness of certain traits in crisis management and apply theories of change management using the Satir and Switch models, in addition to Kotter’s theory of change.

Elsewedy Electrometer Group (EMG) was owned and operated by Emad Zaki Elsewedy as the sole founder and chief executive officer (CEO). EMG was a leading company in the meters industry in Egypt. The time span of this case study covered the period from November 2011, when Elsewedy’s health was deteriorating, to his early retirement in September 2012, and his comeback, two years later, in September 2014. In November 2011, against the backdrop of Elsewedy’s deteriorating health and subsequent early retirement in September 2012, EMG faced several challenges in achieving its vision that hindered its business growth. These arose after Youssef Salah, the former export director of EMG, was appointed as the company CEO. In Elsewedy’s absence, EMG faced liquidity problems, as the banks demanded that it repay all its debts. At the same time, the business suffered severe losses owing to its inefficient operations. Elsewedy decided to return to EMG in September 2014 to find a solution and help the business recover to ensure its continuity and sustainability. After taking a holistic view of the crisis at hand, he was faced with a dilemma and several questions: Was the company leadership effective? Would a change in leadership be required? How could he lead effective change in light of the current crisis? How could he ensure that EMG did not end up in a similar predicament in the future? This case was designed to teach leadership in crisis and change management in the metering industry.

This case study is intended for graduate and undergraduate students studying a leadership or management course. It can help students comprehend the challenges that arise when a large business undergoes a management transition during a crisis. The case study also considers how leaders are shaped by crises. This case study can be considered as level 1 on a 1–3 scale, as the full description of the situation is given in the case study and the task of the students is to analyze the leader and his decisions using various academic concepts and theories (Erskin et al., 2003).

Teaching notes are available for educators only

CSS 7: Management science

The purpose of this study is to make students understand the logic behind and implications of the “Socio-Technical Imbrication Framework” that can help them understand the importance of aligning workforce motivation and capabilities with the modern technology deployed in the organization. Moreover, students will understand the essentiality and criticality of customer satisfaction for the organization.

The technical services operations team at Cotton Web Limited formerly relied on JS Node, e-coordination system, to address customer complaints. There were many bugs in that system as it did not carry along the complaint tracking protocol, was slow in response, fundamentally structured upon manual complaint record keeping that resulted in piling up un-resolved complaints for a longer period of time. The team under the leadership of Mr. Hasan Ali, a competent expert working as GM Research and Data Analytics, undertook detailed analysis of recurring glitches in this system and replaced it with a novel Web-based automated complaint management system at Cotton Web Limited. This entire diagnosis and intervention process took almost three months till completion. The case is written for use in courses in the curriculum of BBA, BBIS, BSIT and BSCS programs at undergraduate level. It is most suitable for the courses in leadership, change management, business process reengineering, soft engineering, team building and business communication.

The case is suitable for teaching at Undergraduate level to the students of BBIS, BBA, BSCS and BSIT students in the last year of their degree programs. Teaching faculty can use case-based methodology for student learning by putting them into a real-life situation faced by an organization and letting them think critically and identify following points for further discussion and clarity: individual or in groups; problem identification through discussion; the stakeholders involved in the company’s situation through presentation or one-pager presentation; case analysis with reaching best solution to prevailing issue at hand through group discussion; reaching a decision or solution with reasonable logic and justification through group discussions; and create further dilemma on the basis of questions unanswered within this case story.

Teaching notes are available for educators only.

CSS 7: Management Science.

The case has the following learning objectives:

1. understand the various types of comparisons that are possible between groups over time and across space;

2. evaluate a policy intervention using relevant data and different methods; and

3. understand the meaning of the phrase “controlling for other relevant factors” in regression and non-regression contexts.

The difference-in-differences (DID) approach is a useful tool for making meaningful comparisons. This case tries to provide a non-technical introduction to the approach using a basic comparison of crime rates among districts in Punjab (Pakistan's largest province). Being the most populous region of the country, Punjab faces many governance challenges, and street crime is one of them. (Exhibit 5 provides additional information about the geographical and administrative setting used in this case study.) In 2016, Chief Minister Shahbaz Sharif established the Dolphin (police) Force in different locations to improve urban patrolling and reduce street crime. There were debates about the effectiveness of the Dolphin Force (DF).

Those who are skeptical of DF point to various situations that were handled incorrectly by DF personnel, as well as other administrative and operational problems in the initiative. Optimists believe it is beneficial and want it to be expanded to other districts and regions. The threat of street crime claims many lives and, according to optimists, necessitates the formation of a special force. Whether the huge resources invested in the DF worth their lot or not can be known through sound statistical analysis that can identify the difference in the rate of crime because of the DF. In this instance, the case provides information to answer the following question:

Is there a significant difference in crime rates between areas where the DF is operating and districts where it has not yet been installed?

In quantitative/statistical analysis classes, the case can be used to teach the DID technique to MBA/MS Applied Statistics/Applied Data Analysis students. It can also be used in undergraduate Econometrics classes.

Teaching notes are available for educators only.

CSS 7: Management Science.