Case studies

This case study aims to equip students with the skills to evaluate the rationale behind a demerger decision, derive the enterprise value and equity value of the conglomerate using the discounted cash flow valuation modelling and assess the company’s value based on qualitative parameters using economy industry company analysis and strengths, weaknesses, opportunities and threats analysis.

This case study delves into the demerger of the financial services arm of Reliance Industries Limited into a separate unit named Jio Financial Services Limited. The independence of this unit is anticipated to enhance shareholder value and unlock the conglomerate discount. In light of these factors, a fundamental analysis of the firm is conducted to determine whether it presents a viable investment opportunity.

This case study is suitable for -graduate and postgraduate courses in financial management.

Teaching notes are available for educators only.

CSS 1: Accounting and finance.

The learning outcomes are as follows: to evaluate the suitability of Surplus business model from accounting, finance, strategy and cultural perspectives; to identify the factors that contribute to the reluctance of business partners to join Surplus ecosystem and to suggest solutions; to identify the factors that contribute to the reluctance of consumers to join Surplus ecosystem and to suggest solutions; and to address unique funding and financial challenges faced by Surplus.

This case study discussed the challenges faced by Surplus Indonesia, a company founded upon the belief that a harmonious balance can be achieved between profitability and environmental stewardship. Stemming from the founder’s encounter with leftover food going to waste after buffets, Surplus embarked on a pioneering initiative using an application technology to address food wastage at the consumer level. Collaborating with various stakeholders such as retail outlets, restaurants, bakeries, cafes and hotels, the goal was to combat food waste while supporting Sustainable Development Goals 2, 12 and 13: Zero Hunger, Responsible Consumption & Production and Climate Action, respectively. Each meal saved through the Surplus app not only translated to reduced expenses for businesses but also contributed to reducing greenhouse gas emissions from landfills. Surplus’ overarching mission was to cut food waste and loss in Indonesia by half by 2030, fostering an environment where food waste is virtually nonexistent in the nation.

Undergraduate as well as graduate courses that focus on sustainability, accounting, financing and strategy

Teaching notes are available for educators only.

CSS 1: Accounting and Finance.

By the end of this case study analysis, students are expected to understand the dynamics of global markets by identifying institutional voids in prospective export destinations using the framework by Khanna and Palepu; evaluate potential export destinations for Nablus Soap Company (NSC), taking into account the identified institutional voids and their implications for market entry.

Formulate strategies for NSC to address institutional voids and manage exports effectively to the selected country.

Assess various global expansion strategies beyond exporting for NSC, examining their respective advantages, disadvantages, and feasibility within the context of the company’s goals.

Analyze the factors that contributed to NSC’s successful expansion into 72 countries, despite the longstanding challenges faced by Palestinians since 1948, including the recent impact of the 2023 situation in Gaza on the West Bank.

This case study provides students with an in-depth understanding of the Palestinian economy, focusing on the NSC, a small and medium enterprise in the olive soap industry. Founded by Mojtaba Tbeleh in 1971, NSC’s legacy spans 400 years. It is known for crafting handmade, 100% natural soap with olive oil as a key ingredient. As of November 2023, NSC has successfully expanded its exports to more than 72 countries. Despite this achievement, the company faces significant challenges due to various restrictions, particularly those imposed by occupying forces. The case study provides insights into NSC’s international expansion challenges, guiding students in understanding how institutional voids in potential expansion destinations impact market entry decisions. It encourages them to identify these voids select appropriate markets and formulate strategies to leverage NSC’s global expansion potential.

This case study is suitable for undergraduate- or postgraduate-level students.

Teaching notes are available for educators only.

CSS 5: International business.

This case is written to help students understand the concept of segmentation, targeting and positioning in the context of the biscuit industry. The primary learning objectives can be identified as follows: understand the different categorisation in the biscuit market; analyse the basis of consumer segmentation in the biscuit market; analyse the marketing mix strategy of a firm; and highlight the importance of positioning.

Rao, the Director (Marketing) of Mayora India Private Limited, was in dilemma as to how to position Coffee Joy biscuits in the Indian market. The Indian market was intensely competitive with major players like Britannia, Parle and ITC capturing a major share of the market. Should he consider the only the south Indian market based on geography?” Or “Should he target the modern aspirational youth of the country who frequent “Starbucks”?

This case is appropriate for the use in postgraduate course on Marketing particularly on “Segmenting-Targeting-Positioning” (STP) module. The science of STP lies in the collection and analysis of market knowledge and research to understand consumer’s mind, whereas its art lies in generating various implementable alternatives so that the brand can find a place in the hearts and minds of consumers.

Teaching notes are available for educators only.

CSS8: Marketing.

The learning outcomes are as follows: to identify and analyze the importance of operations management in a situation demanding minimizing environmental impact and maintaining operational momentum; access the risks faced during project executions and apply project management concepts to facilitate Karachi Steel in implementing indigenous technological solutions; and evaluate the importance of adaptability, continuous improvement and innovation in creating sustainable solutions to address complex challenges.

Javaid Iqbal, CEO of Karachi Steel, was the case’s protagonist. With capacity expansion, Javaid relocated the steel facility from Rawalpindi to Islamabad, Pakistan. The company encountered several difficulties because of the air emissions’ inconvenience to nearby residents and the strict environmental regulations. To push the emissions into the air, the company first installed a locally fabricated chimney. Later, they hired a foreign Pakistani engineering firm to install air filters, but the project proved unsuccessful. To control emissions, the company developed a Wet Particulate Control (WPC) system based on a water-sprinkling mechanism. The endeavor was successful, but it resulted in water pollution. As a result, Karachi Steel signed a contract with a local engineering company that invented and effectively installed an air filtration system. Karachi Steel not only devised solutions for their predicaments but also made significant contributions toward achieving the Sustainable Development Goals (SDGs). However, the emissions reporting and monitoring mechanism continued to cause inconvenience for regulators. In addition, the filtration facility encountered a blocked duct conveying zinc sulfate from smoke, resulting in the periodic suspension of operations. As Karachi Steel seek long-term solutions to current challenges, it is critical to examine the relationship between internal circumstances and external forces and stimulate a holistic approach to resolving issues within the realms of operations management and project management.

The case study is suitable for students pursuing their undergraduate degree programs in business studies or management sciences. This case can be taught in specific subjects in the domain of management sciences, including project management and operations management. Furthermore, undergraduate students pursuing degrees in environmental sciences, specializing in environmental impact assessment and sustainable development, can also learn from this case study. These subjects have the potential to provide students with a detailed understanding of the dynamic relationship between environmental problems caused by business activities, and how to address these challenges using principles of project management and operations management. There is no pre-requisite for this case study, and the level of difficulty is moderate. The recommended teaching pedagogy for this multidisciplinary case study includes role-playing exercises, simulations to replicate real-world situations and the Socratic method, which encourages critical thinking.

Teaching notes are available for educators only.

CSS 7: Management Science.

Following a discussion of the case, students should be able to analyse competitive dynamics: provide an in-depth critical analysis of Ilco Farming’s microenvironment, using the structure–conduct–performance framework; evaluate strategic positioning: conduct a SWOT analysis of Ilco Farming’s medicinal cannabis business; and develop strategic approaches: propose actionable strategies that would provide effective solutions to the problem of constrained market conditions currently faced by Ilco Farming.

Coenie and Ilse Venter established Ilco Farming, a cannabis farm located in the Viljoenskroon district in the Free State province in South Africa, in 2021. From the beginning, they poured their hearts and souls into their new venture, which soon paid off. A few short months after Ilco Farming began operating, despite the presence of other large competitors, Ilco Farming supplied a large share of the domestic medicinal market with flower heads. But then an unexpected challenge presented itself. In March 2023, Ilco Farming was operating at only 23% (600 m²) of its production capacity of 2600 m² and had considerable room for growth, the local market – at least the local legal market – for cannabis began to show signs of saturation. Coenie and Ilsa found themselves at the proverbial crossroads, grappling with the crucial decision of how to secure their farm’s future in the face of a fast-saturating local (legal) cannabis market and a thriving (illegal) black market. Coenie and Ilse refused to entertain the idea of going the black market route, as they were unwilling to risk losing their operating licence. They calculated that the farm would reach breakeven point within the next two years, with profits unlikely during this period. Should they persist with their current strategy of producing high-quality products and delivering a superior service in the hopes of growing their market share? Or should they consider other strategic options? Coenie and Ilse were sitting at their boardroom table having a cup of coffee and looking out of the window at Ilco Farming’s impressive SAHPRA- and GAP-approved warehouse and tunnels. “What should we do?” they both wondered.

The case study can be used in postgraduate courses in microeconomics (PGDIP/MBA) and agricultural economics (PGDIP/MBA).

Teaching notes are available for educators only.

CSS 5: International business.

Risk identification and qualitative assessment are the learning outcomes.

The Bharat Bijlee Construction Limited (BBCL) was one of the largest construction companies operating in the power sector in India. After successfully completing a few projects in the Middle East, BBCL decided to expand its presence into African region. The BBCL was awarded a $85m contract for three sub-station projects to modernise Algeria’s power grid system by the “Shariket Karhaba Koudiet Eddraouch Spa”, a state-owned company in charge of power generation, transmission and distribution in Algeria.

The project, which is the first of BBCL in Saharan region in Algeria’s, presents many unique situations that company had never encountered before, including sand dunes, severe weather, remote locations, supply chain & logistics, strict contractual deadlines and a high level of construction risk. The project manager for BBCL was sceptic about how well his company would perform under the present project circumstances. How could he better align himself with the client, the various on-site local contractors and the numerous suppliers spread around the world?

The case emphasises the identification of various project risks that the project manager might encounter in the project. What do the PESTLE and ASCE frameworks for risk identification each represent, and how are they helpful for the project team in understanding various risks? How should the project’s qualitative risk assessment be conducted? And how can a heat map be a better tool for comprehending the criticality of each risk in the project?

Undergraduate and post graduate courses in project management, civil engineering and architecture domain.

Teaching notes are available for educators only.

CSS 2: Built Environment.

After completion of the case study, students will be able to understand the service offerings within the nascent electric vehicle (EV) sector and end-consumer needs of EV charging services, understand the reasoning behind Sunfuel Electrics (SFEs) prioritisation of destination charging for their first go-to-market (GTM) strategy and appreciate SFE’s use of community marketing and alliance partners to execute its various strategies. Connect game-theory with the proposed strategies.

SFE was an early start-up in EV charging space. The co-founders believed that any success would hinge on their ability to play a differentiated game and carve a distinct yet profitable niche in the EV charging arena. SFE deliberately focussed on “destination charging” and identified a segment that they were confident of making a difference: the discerning high-end consumer. Soon, SFE’s success caught the eye of its deep-pocketed competitors who also entered the same space. As a single service company, the co-founders set in motion a back-up plan and identified three new strategic thrust areas to maintain SFE’s competitive edge. The first involved entering the city charging segment, and the second was a pioneering concept branded “E-Trails” targeted at a community of EV owners who were motor enthusiasts. Thirdly, SFE conceptualised an EV-Roadhouse concept, promising a full-bouquet of select premium services at a pit-stops along the highway. The co-founders needed to test which and to what extent would these initiatives would translate into real gains and if returns were commensurate with investments and SFE’s ability to deliver a scalable consistent experience. Specifically, if these proposed asset-light avenues added the required heft to their GTM strategy.

This case study is suitable for post-graduate students in marketing, strategy, entrepreneurship and sustainability courses.

Teaching notes are available for educators only.

CSS 8: Marketing.

This case study would enable the learners to identify and evaluate the factors impacting the strategic decision to enter international markets. The learners would be able to identify parameters such as level of competition, perception regarding foreign entrants and demand factors that are crucial for the form to consider while taking such an important decision. The case study will also allow learners to understand the challenges of an entrepreneurial journey.

This case study is an interesting story of two entrepreneurs’ dilemma of internationalization strategy of their firm Aeron. Their firm’s product Tilt Switch had a good international demand and both partners wished to capture this opportunity, post the COVID-19 pandemic. This case study shows how the firm looked into factors to study new international markets, balancing risk and opportunity. The case study highlights the important role of strategic planning in achieving successful internationalization by analysing various approaches to market entry and adaptation. The firm had a choice of either developing their domestic market India or going for international markets of the USA or European Union.

This case study is suitable for graduation and postgraduation courses.

Teaching notes are available for educators only.

CSS 5: International Business.

After completion of the case study, the students will be able to define and compute equivalent units of production, apply management accounting procedures for manufacturing businesses (Furqani Sugar Mills), calculate product cost and track product cost flows and prepare process cost summary using the weighted average method. By studying this case, learners will gain insights into the challenges and financial complexities faced by a sugar mill and how strategic decisions and economic analysis can impact the sustainability and profitability of such businesses.

This case study explained the problem Mr Zoraiz, chief financial officer (CFO) of Furqani Sugar Mill, was facing. The problems started in the month of November 2020. Mill’s owner Mr Jabbar asked him for suggestions that employees should not be laid off. So he was analysing and estimating the cost of production when increasing production. He was focusing on cost reduction in process or increasing production, and utilization of resources efficiently and effectively. This case study focused on the market segment of the sugar industry for process costing. Furqani Sugar Mill, founded in 1992 in Pakistan (Company Document), had a noble mission to improve the lives of local peasants by producing sugar and molasses. Pakistan heavily relied on agribusiness, particularly sugar production, which contributed significantly to manufacturing. However, Furqani Sugar Mill faced a dire situation despite its vital role. During the sugarcane season, it struggled due to a shortage of raw materials, primarily sugarcane. Zoraiz, the CFO, grappled with running the mill below total capacity in recent years due to two significant issues: government-fixed sugar prices and limited sugarcane supply from local farmers. The high cost of sugarcane hindered Zoraiz’s desire to operate at total capacity. Zoraiz, Furqani’s CFO, must decide what he can do so that the mill can operate at its total capacity. The future of Furqani Sugar Mill hung in the balance as Zoraiz navigated complex financial decisions while striving to uphold the mill’s legacy and commitment to the local community.

This case study is suitable for teaching in several modules, notably managerial accounting and control systems, management accounting decision-making and cost and management accounting. Specifically, it covers performance management and process costing in management accounts. It is appropriate for teaching at the undergraduate and postgraduate levels.

Teaching notes are available for educators only.

CSS 1: Accounting and finance.