Search results

This paper aims to address the challenges in hydroacoustic signal detection, signal distortion and target localization caused by baseline drift. The authors propose a combined algorithm that integrates short-time Fourier transform (STFT) detection, smoothness priors approach (SPA), attitude calibration and direction of arrival (DOA) estimation for micro-electro-mechanical system vector hydrophones.

Initially, STFT method screens target signals with baseline drift in low signal-to-noise ratio environments, facilitating easier subsequent processing. Next, SPA is applied to the screened target signal, effectively removing the baseline drift, and combined with filtering to improve the signal-to-noise ratio. Then, vector channel amplitudes are corrected using attitude correction with 2D compass data. Finally, the absolute target azimuth is estimated using the minimum variance distortion-free response beamformer.

Simulation and experimental results demonstrate that the SPA outperforms high-pass filtering in removing baseline drift and is comparable to the effectiveness of variational mode decomposition, with significantly shorter processing times, making it more suitable for real-time applications. The detection performance of the STFT method is superior to instantaneous correlation detection and sample entropy methods. The final DOA estimation achieves an accuracy within 2°, enabling precise target azimuth estimation.

To the best of the authors’ knowledge, this study is the first to apply SPA to baseline drift removal in hydroacoustic signals, significantly enhancing the efficiency and accuracy of signal processing. It demonstrates the method’s outstanding performance in the field of underwater signal processing. In addition, it confirms the reliability and feasibility of STFT for signal detection in the presence of baseline drift.

Ciliated microelectromechanical system (MEMS) vector hydrophones pick up sound signals through Wheatstone bridge in cross beam-ciliated microstructures to achieve information transmission. This paper aims to overcome the complexity and variability of the marine environment and achieve accurate location of targets. In this paper, a new method for ocean noise denoising based on improved complete ensemble empirical mode decomposition with adaptive noise combined with wavelet threshold processing method (CEEMDAN-WT) is proposed.

Based on the CEEMDAN-WT method, the signal is decomposed into different intrinsic mode functions (IMFs), and relevant parameters are selected to obtain IMF denoised signals through WT method for the noisy mode components with low sample entropy. The final pure signal is obtained by reconstructing the unprocessed mode components and the denoising component, effectively separating the signal from the wave interference.

The three methods of empirical mode decomposition (EMD), ensemble empirical mode decomposition (EEMD) and CEEMDAN are compared and analyzed by simulation. The simulation results show that the CEEMDAN method has higher signal-to-noise ratio and smaller reconstruction error than EMD and EEMD. The feasibility and practicability of the combined denoising method are verified by indoor and outdoor experiments, and the underwater acoustic experiment data after processing are combined beams. The problem of blurry left and right sides is solved, and the high precision orientation of the target is realized.

This algorithm provides a theoretical basis for MEMS hydrophones to achieve accurate target positioning in the ocean, and can be applied to the hardware design of sonobuoys, which is widely used in various underwater acoustic work.

The purpose of this study is to examine the fretting wear property of ultra-high molecular weight polyethylene (UHMWPE)-based composites reinforced by different content of attapulgite.

A series of composites were prepared by a hot-pressing method. Fretting tests were carried out using an SRV-IV oscillating reciprocating friction wear tester with a load of 10 N and a frequency of 100 Hz. The morphology of the fracture structure and the worn surface was observed by field-emission scanning electron microscopy, X-ray diffraction and a non-contact three dimensional surface profiler.

With the addition of attapulgite, the microstructure of the composites become more regular, and their heat resistance improved. Furthermore, the friction coefficient and the specific wear rate of the composites with lower filler content reduced compared with that of neat UHMWPE, and the optimum filler content is 1 per cent.

The study investigated the fretting resistance mechanism of the attapulgite in the UHMWPE matrix. The results could help to provide some experimental evidence for the broader application of silicates on the fretting wear resistance of polymers.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-10-2019-0420/

The purpose of this paper is to present an overview of functional properties of the polysaccharide-based component and their application in developing edible film and coating for the food processing sector.

In this review study, approximately 271 research and review articles focusing on studies related to polysaccharide-based components and their film-forming properties. This article also focused on the application of polysaccharide-based edible film in the food sector.

From the literature reviewed, polysaccharide components and components-based edible film/coating is the biodegradable and eco-friendly packaging of the materials and directly consumed by the consumer with food. It has been reported that the polysaccharide components have excellent properties such as being nontoxic, antioxidant, antimicrobial, antifungal and with good nutrients. The polysaccharide-based edible film has lipid and gas barrier properties with excellent transparency and mechanical strength. In various studies, researchers worked on the development of polysaccharide-based edible film and coating by incorporating plant based natural antioxidants. This was primarily done for obtaining improved physical and chemical properties of the edible film and coating. In future, the technology of developing polysaccharide-based edible film and coating could be used for extending the shelf life and preserving the quality of fruits and vegetables at a commercial level. There is more need to understand the role of edible packaging and sustainability in the food and environment sector.

Through this review paper, possible applications of polysaccharide-based components and their function property in the formation of the edible film and their effect on fruits, vegetables and other food products are discussed after detailed studies of literature from thesis and journal article.