Search results

Quantitative and spatial-explicit flood risk information is of great importance for strengthening climate change adaptation and flood resilience. Shanghai is a coastal megacity at large estuary delta with rising flood risks. This study aims to quantify the overall economic-societal risks of storm flooding and their spatial patterns in Shanghai.

Based on multiple storm flood scenarios at different return periods, as well as fine-scale data sets including gridded GDP, gridded population and vector land-use, a probabilistic risk model incorporating geographic information system is used to assess the economic-societal risks of flooding and their spatial distributions.

Our results show that, from 1/200 to 1/5,000-year floods, the exposed assets will increase from USD 85.4bn to USD 657.6bn, and the direct economic losses will increase from USD 3.06bn to USD 52bn. The expected annual damage (EAD) of assets is around USD 84.36m. Hotpots of EAD are mainly distributed in the city center, the depressions along the upper Huangpu River in the southwest, the north coast of Hangzhou Bay, and the confluence of the Huangpu River and Yangtze River in the northeast. From 1/200 to 1/5,000-year floods, the exposed population will rise from 280 thousand to 2,420 thousand, and the estimated casualties will rise from 299 to 1,045. The expected annual casualties (EAC) are around 2.28. Hotspots of casualties are generally consistent with those of EAD.

In contrast to previous studies that focus on a single flood scenario or a particular type of flood exposure/risk in Shanghai, the findings contribute to an understanding of overall flood risks and their spatial patterns, which have significant implications for cost-benefit analysis of flood resilience strategies.

This paper aims to understand the vibration characteristics of full ceramic ball bearings under grease lubrication, reduce the vibration of the bearings and improve their service life.

The Hertz contact stiffness formula for full ceramic ball bearings is constructed; the equivalent comprehensive stiffness calculation model and vibration model of full ceramic ball bearings are established. The dynamic characteristic test of full ceramic ball bearing under grease lubrication was carried out by using the bearing life testing machine, and its vibration was measured, and its vibration acceleration root-mean-square was obtained by software calculation and compared with the simulation results.

At the rotational speed of 12,000 r/min, the root-mean-square value of vibration acceleration is maximum 10.82 m/s², and the error is also maximum 7.49%. As the rotational speed increases, the oil film stiffness decreases. In the radial load of 600 N, the vibration acceleration root-mean-square is minimum 6.40 m/s², but its error is maximum 6.56%. As the radial load increases, the vibration of the bearing decreases and then increases, so under certain conditions increasing the radial load can reduce the bearing vibration. With different types of grease, the best preload is also different; low-speed heavy load should be used when the viscosity of the grease is large, and high-speed light load should be used when the choice of smaller viscosity grease is made.

It provides a theoretical basis for the application of full ceramic ball bearings under grease lubrication, which is of great significance for reducing the vibration of bearings as well as enhancing the service life of bearings.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-03-2024-0094/

The study focuses on intraindividual trajectory of job crafting change over time. Integrating the self-regulation and demands-resources perspectives, this study examines how career support from family and friends interacts with job autonomy to influence the change pattern of job crafting.

Four waves of self-report survey data were collected in a semester from 324 university professors and instructors in China. Latent growth curve modeling was used to examine intraindividual change of job crafting and conducted latent interaction analysis to test the joint effect of autonomy and career support from family and friends on job crafting change.

There was a general declining trend in job crafting over the course of a semester. Career support from family and friends moderated the association between job autonomy and job crafting maintenance. Specifically, when career support was low, job autonomy was negatively associated with job crafting maintenance.

The study showed that job crafting maintenance over time is distinct from the typical between-person conceptualization. Further, job crafting maintenance was predicted from a self-regulatory perspective. However, the unique context of college faculty from China may limit generalization of the findings.

Managers should recognize the challenges in maintaining job crafting over time. In addition to providing autonomy at work, organizations may benefit from establishing channels for employees to receive career support from non-work domains.

The authors adopt a self-regulation perspective to understand intraindividual change in job crafting over time and situate the current investigation in the cyclical nature of university faculty’s job.

The purpose of this study is to present a highly stretchable and flexible strain sensor with simple and low cost of fabrication process and excellent dynamic characteristics, which make it suitable for human motion monitoring under large strain and high frequency.

The strain sensor was fabricated using the rubber/latex polymer as elastic carrier and single-walled carbon nanotubes (SWCNTs)/carbon black (CB) as a synergistic conductive network. The rubber/latex polymer was pre-treated in naphtha and then soaked in SWCNTs/CB/silicon rubber composite solution. The strain sensing and other performance of the sensor were measured and human motion tracking applications were tried.

These strain sensors based on aforementioned materials display high stretchability (500 per cent), excellent flexibility, fast response (approximately 45 ms), low creep (3.1 per cent at 100 per cent strain), temperature and humidity independence, superior stability and reproducibility during approximately 5,000 stretch/release cycles. Furthermore, the authors used these composites as human motion sensors, effectively monitoring joint motion, indicating that the stretchable strain sensor based on the rubber/latex polymer and the synergetic effects of mixed SWCNTs and CB could have promising applications in flexible and wearable devices for human motion tracking.

This paper presents a low-cost and a new type of strain sensor with excellent performance that can open up new fields of applications in flexible, stretchable and wearable electronics, especially in human motion tracking applications where very large strain should be accommodated by the strain sensor.

Silicon-containing groups were introduced into fluoroacrylate polymer to further improve the comprehensive performance of pressure-sensitive adhesive (PSA) for expanded polytetrafluoroethylene (ePTFE) bonding.

A series of silicon-containing fluorinated acrylic copolymers were synthesized through free radical solution polymerization with vinyloxy trimethylsilane, allyltrimethylsilane, 3-(trimethoxysilyl)propyl methacrylate or 1,3,5-tris(3,3,3-trifluoropropyl) methylcyclotrisiloxane as silicon monomers, and comprehensive performance of the copolymers was evaluated based on Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), gel permeation chromatography, glass transition temperatures (T_g), differential scanning calorimetry, thermogravimetric analysis, water contact angle, the track, 180° peel strength, and shear holding power.

Based on the FTIR and XPS results, it is confirmed that the silicon monomers were successfully introduced into the fluorinated acrylate copolymer. XPS analysis indicated that the silicon groups had the tendency to enrich on the surface of the film, thereby reducing the F content on the film surface. The glass transition temperatures (T_g) of the PSAs increased when silicon monomers were introduced, while the thermal stability declined. The contact angles of the acrylic PSA films were increased with the introduction of silicon monomers. From the perspective of bonding performance, the track, 180° peel strength and shear holding power decreased to varying degrees compared to silicon-free PSA, except significantly elevated holding power with MPS as the silicon monomer.

Silicon-containing fluorinated acrylic copolymers were synthesized, and the comprehensive performance was evaluated as PSAs of ePTFE for the first time.

The purpose of this paper is to reveal the distributional characteristics and evolutional patterns in source periodicals, topics, authors, funding, and institutes of research papers in Chinese Agricultural Economics so as to understand the current situations and developmental tendency of Chinese agricultural economics research over the past decade.

Using the citation analysis method, this paper analyzed the distributional characteristics and evolution of source periodicals, fields, authors and topics of 2,203 highly cited journal papers from the database of China National Knowledge Infrastructure (CNKI) and 189 cited journal papers from database of Social Sciences Citation Index (SSCI) in agricultural economics first-authored by Chinese scholars from 2006 to 2015.

First, over the past decade, agricultural economics research in China has seen a rapid development. Specially, 103 scholars and 42 institutes have played key roles in the development, and 12 Chinese periodicals and 3 international journals have been the most influential outlets. Second, the coverage of the topics in Chinese agricultural economics research is broad and has expanded over the past decade. The rural land issue has been the most popular topic, while the issues regarding rural institutional arrangements and industrialization in rural areas have been explored extensively. However, issues in other fields, such as agricultural markets and trade, rural labor, food safety, etc. have to be further studied. Third, the improvements of economic theory and quantitative analytic techniques, the supports from research funding, and an increase in the collaboration between Chinese scholars and those from other countries have made great contribution to the rapid development of Chinese agricultural economics research over the past decade.

This paper is an original work that identifies the most influential journal papers including highly cited journal papers from CNKI and cited journal papers from SSCI, using citation frequency and standard Essential Science Indicators method. This is a contribution relative to the methods used by previous studies, which did not account for frequency of citation of a paper. Moreover, this study is based on data from two databases, CNKI and SSCI, suggesting that the coverage of sample papers is broader compared to those of previous studies.