Jianing Wang, Jieshi Chen, Zhiyuan Zhang, Peilei Zhang, Zhishui Yu and Shuye Zhang
The purpose of this article is the effect of doping minor Ni on the microstructure evolution of a Sn-xNi (x = 0, 0.05 and 0.1 wt.%)/Ni (Poly-crystal/Single-crystal abbreviated as…
Abstract
Purpose
The purpose of this article is the effect of doping minor Ni on the microstructure evolution of a Sn-xNi (x = 0, 0.05 and 0.1 wt.%)/Ni (Poly-crystal/Single-crystal abbreviated as PC Ni/SC Ni) solder joint during reflow and aging treatment. Results showed that the intermetallic compounds (IMCs) of the interfacial layer of Sn-xNi/PC Ni joints were Ni3Sn4 phase, while the IMCs of Sn-xNi/SC Ni joints were NiSn4 phase. After the reflow process and thermal aging of different joints, the growth behavior of interfacial layer was different due to the different mechanism of element diffusion of the two substrates. The PC Ni substrate mainly provided Ni atoms through grain boundary diffusion. The Ni3Sn4 phase of the Sn0.05Ni/PC Ni joint was finer, and the diffusion flux of Sn and Ni elements increased, so the Ni3Sn4 layer of this joint was the thickest. The SC Ni substrate mainly provided Ni atoms through the lattice diffusion. The Sn0.1Ni/SC Ni joint increases the number of Ni atoms at the interface due to the doping of 0.1Ni (wt.%) elements, so the joint had the thickest NiSn4 layer.
Design/methodology/approach
The effects of doping minor Ni on the microstructure evolution of an Sn-xNi (x = 0, 0.05 and 0.1 Wt.%)/Ni (Poly-crystal/Single-crystal abbreviated as PC Ni/SC Ni) solder joint during reflow and aging treatment was investigated in this study.
Findings
Results showed that the intermetallic compounds (IMCs) of the interfacial layer of Sn-xNi/PC Ni joints were Ni3Sn4 phase, while the IMCs of Sn-xNi/SC Ni joints were NiSn4 phase. After the reflow process and thermal aging of different joints, the growth behavior of the interfacial layer was different due to the different mechanisms of element diffusion of the two substrates.
Originality/value
In this study, the effect of doping Ni on the growth and formation mechanism of IMCs of the Sn-xNi/Ni (single-crystal) solder joints (x = 0, 0.05 and 0.1 Wt.%) was investigated.
Details
Keywords
Xinjie Zhang, Fansen Kong, Zhiyuan Gu and Xiao Shen
FOV splicing optical remote sensing instruments have a strict requirement for the focal length consistency of the lens. In conventional optical-mechanical structure design, each…
Abstract
Purpose
FOV splicing optical remote sensing instruments have a strict requirement for the focal length consistency of the lens. In conventional optical-mechanical structure design, each optical element is equally distributed with high accuracy and everyone must have a high machining and assembly accuracy. For optical remote sensors with a large number of optical elements, this design brings great difficulties to lens manufacture and alignment.
Design/methodology/approach
Taking the relay lens in an optical remote sensing instrument with the field of view splicing as an example, errors of the system are redistributed to optical elements. Two optical elements, which have the greatest influence on modulation transfer function (MTF) of the system are mounted with high accuracy centering and the other elements are fixed by gland ring with common machining accuracy. The reduction ratio consistency difference among lenses is compensated by adjusting the optical spacing between the two elements.
Findings
Based on optical system simulation analysis, the optimized structure can compensate for the difference of reduction ratio among lens by grinding the washer thickness in the range of ±0.37 mm. The test data for the image quality of the lens show that the MTF value declined 0.043 within ±0.4 mm of space change between two barrels. The results indicate that the reduction ratio can be corrected by adjusting the washer thickness and the image quality will not obviously decline.
Originality/value
This paper confirms that this work is original and has not been published elsewhere nor is it currently under consideration for publication elsewhere. In this paper, the optimum structural design of the reduction relay lens for the field of view stitching applications is reported. The method of adjusting washer thickness is applied to compensate for the reduction ratio consistency difference of lenses. The optimized structure also greatly reduces the difficulty of lenses manufacture, alignment and improves the efficiency of assembly.
Details
Keywords
The purpose of this paper is to investigate cutting-edge coagulant materials and procedures for the removal of harmful microplastics from the water.
Abstract
Purpose
The purpose of this paper is to investigate cutting-edge coagulant materials and procedures for the removal of harmful microplastics from the water.
Design/methodology/approach
Traditional methods of removing microplastics from water bodies, like filtration, face limitations due to the small sizes involved. Hence, coagulation and flocculation emerge as essential strategies to enhance filtration efficacy. This paper summarizes recent research on coagulant materials, including novel hybrids, for water purification. It also looks at the most recent improvements in coagulation and flocculation processes, as well as the factors that influence their efficiency.
Findings
This paper highlights recent research on coagulant materials, including novel hybrids, used in water purification. It also examines the most recent advancements in coagulation and flocculation procedures, as well as the elements influencing their effectiveness.
Originality/value
The environmental threat posed by plastics, especially in their non-naturally degradable forms, such as microplastics, has reached alarming proportions. These minute particles pervade our air, soil and water bodies, driven by various factors and sources. Their diminutive size, whether in micro or nano form, renders them ingestible by marine and freshwater organisms, as well as humans, posing significant health risks. Traditional methods of water cleaning are not effective in dealing with very small-sized plastics and hence this paper summarizes recent research on coagulant materials, including various novel hybrids, for water purification from tiny microplastics in detail.
Details
Keywords
Due to climate change and an increasing concentration of the world’s population in vulnerable areas, how to manage catastrophe risk efficiently and cover disaster losses fairly is…
Abstract
Purpose
Due to climate change and an increasing concentration of the world’s population in vulnerable areas, how to manage catastrophe risk efficiently and cover disaster losses fairly is still a universal dilemma.
Methodology
This paper applies a law and economic approach.
Findings
China’s mechanism for managing catastrophic disaster risk is in many ways unique. It emphasizes government responsibilities and works well in many respects, especially in disaster emergency relief. Nonetheless, China’s mechanism which has the vestige of a centrally planned economy needs reform.
Practical Implications
I propose a catastrophe insurance market-enhancing framework which marries the merits of both the market and government to manage catastrophe risks. There are three pillars of the framework: (i) sustaining a strong and capable government; (ii) government enhancement of the market, neither supplanting nor retarding it; (iii) legalizing the relationship between government and market to prevent government from undermining well-functioning market operations. A catastrophe insurance market-enhancing framework may provide insights for developing catastrophe insurance in China and other transitional nations.
Originality
First, this paper analyzes China’s mechanism for managing catastrophic disaster risks and China’s approach which emphasizes government responsibilities will shed light on solving how to manage catastrophe risk efficiently and cover disaster losses fairly. Second, this paper starts a broader discussion about government stimulation of developing catastrophe insurance and this framework can stimulate attention to solve the universal dilemma.
Details
Keywords
Yunli Bai, Tianhao Zhou, Zhiyuan Ma and Linxiu Zhang
The purpose of this paper is to examine the role of infrastructure on the income growth and poverty reduction of rural household in China by estimating the impact of road…
Abstract
Purpose
The purpose of this paper is to examine the role of infrastructure on the income growth and poverty reduction of rural household in China by estimating the impact of road accessibility on the extent of household off-farm employment and its heterogeneous effects among the groups with different income level and earning capacity.
Design/methodology/approach
Using nationally representative panel data collected in 100 villages about 2000 households across five provinces in 2005, 2008, 2012, 2016 and 2019. This study adopts Tobit model with panel data, zero-inflated Poisson model and static nonbalanced panel model to yield consistent results.
Findings
We find that road accessibility generally has no effect on the number of off-farm laborers and duration of off-farm employment. However, road accessibility is not beneficial for the households in the low-income villages or with low educational attainment, but it benefits the households in the high-income villages by promoting local off-farm employment or with high educational attainment by increasing the duration of migrant off-farm employment.
Originality/value
This study identifies the heterogeneous effects of road accessibility on the extent of off-farm employment among rural households, which narrows the research gap and enriches the literature. The empirical findings imply that road accessibility widens the gap between rich and poor in off-farm employment, which is of great important to the alleviation of relative poverty after 2020 in China.
Details
Keywords
Zhenkun Liu, Ping Jiang, Jianzhou Wang, Zhiyuan Du, Xinsong Niu and Lifang Zhang
This study/paper aims to reach the core objective of hospitality order cancellation prediction (HOCP), that is, to identify potential cancellers from many customer bases, thereby…
Abstract
Purpose
This study/paper aims to reach the core objective of hospitality order cancellation prediction (HOCP), that is, to identify potential cancellers from many customer bases, thereby enhancing the effectiveness of customer retention campaigns. However, few studies have focused on predicting hospitality order cancellation.
Design/methodology/approach
A novel profit-driven model for predicting hospitality order cancellation is proposed to bridge this research gap. The authors construct profit-driven extreme gradient boosting (XGBoost) based on a grid search on HOCP to maximize profit by selecting optimal hyperparameters of XGBoost.
Findings
Real-world data set is analyzed, and the proposed model yields more profits than other predictive models. Sensitivity analysis proves that the proposed model is robust to the key hyperparameter and application scenario. Furthermore, some preventive measures based on visual analysis results are provided to reduce the cancelled probability of orders.
Research limitations/implications
This research will help hotel managers to transfer the modeling goal to profit orientation and encourage relevant researchers to interpret the prediction results of models for hotel order cancellation prediction in a post hoc manner. Besides, the proposed model can be applied to various enterprises with different average order profits and help managers optimize revenue management.
Originality/value
This research expands the relevant literature and offers guidance for predicting hospitality order cancellation from a profit-driven perspective at the customer level. The proposed model can provide macro-control to hotel managers and obtain the most satisfactory profits in micro-control.
Details
Keywords
Xiaobing Wang, Chengfang Liu, Linxiu Zhang, Renfu Luo, Thomas Glauben, Yaojiang Shi, Scott Rozelle and Brian Sharbono
With the rise in the opportunity to go to college, the purpose of this paper is to identify if China's rural poor are being excluded from the university system, and if so, why.
Abstract
Purpose
With the rise in the opportunity to go to college, the purpose of this paper is to identify if China's rural poor are being excluded from the university system, and if so, why.
Design/methodology/approach
Two sets of the authors' own primary survey data were used: a group of randomly selected high school students in Shaanxi Province and a census of all freshmen entering into four universities in Sichuan, Anhui and Shaanxi. The intention was to show if the rate of the rural poor attending universities is lower than that of urban students and that of rural non‐poor; also to identify the barriers to education (if they exist) that are keeping enrollment rates low for the rural poor. The authors used ordinary least squares method to make the estimations.
Findings
Matriculation rate of the poor into college was found to be substantially lower than the students from non‐poor families. Clearly, barriers exist that are excluding the rural poor; however, the authors demonstrate that the real barriers are not at the point of college admissions, but before students have even matriculated into high school.
Originality/value
This is the first empirical work which studies the barriers that keep the poor out of university.
Details
Keywords
Bo Zhang, Yuqian Zheng, Zhiyuan Cui, Dongdong Song, Faqian Liu and Weihua Li
The impact of rolling on the performance of micro arc oxidation (MAO) coatings on ZM5 alloy has been underreported. The purpose of this study is to explore the correlation between…
Abstract
Purpose
The impact of rolling on the performance of micro arc oxidation (MAO) coatings on ZM5 alloy has been underreported. The purpose of this study is to explore the correlation between rolling and the failure mechanism of MAO coatings in greater depth.
Design/methodology/approach
The influence of rolling on the corrosion and wear properties of MAO coating was investigated by phase structure, bond strength test (initial bond strength and wet adhesion), electrochemical impedance spectroscopy and wear test. The change of the surface electrochemical properties was studied by first principles analysis.
Findings
The results showed that the MAO coating on rolled alloy had better corrosion and wear resistance compared to cast alloy, although the structure and component content of two kinds of MAO coating are nearly identical. The difference in interface bonding between MAO coating and Mg substrate is the primary factor contributing to the disparity in performance between the two types of samples. Finally, the impact of the rolling process on MAO coating properties is explained through first-principle calculation.
Originality/value
A comprehensive explanation of the impact of the rolling process on MAO coating properties will provide substantial support for enhancing the application of Mg alloy anticorrosion.
Graphical abstract
Details
Keywords
Yalan Yan, Xi Zhang, Xianjin Zha, Tingting Jiang, Ling Qin and Zhiyuan Li
Digital libraries and social media are two sources of online information with different characteristics. The purpose of this paper is to integrate self-efficacy into the analysis…
Abstract
Purpose
Digital libraries and social media are two sources of online information with different characteristics. The purpose of this paper is to integrate self-efficacy into the analysis of the relationship between information sources and decision making, and to explore the effect of self-efficacy on decision making, as well as the interacting effect of self-efficacy and information sources on decision making.
Design/methodology/approach
Survey data were collected and the partial least squares structural equation modeling was employed to verify the research model.
Findings
The effect of digital library usage for acquiring information on perceived decision quality (PDQ) is larger than that of social media usage for acquiring information on PDQ. Self-efficacy in acquiring information (SEAI) stands out as the key determinant for PDQ. The effect of social media usage for acquiring information on PDQ is positively moderated by SEAI.
Practical implications
Decision making is a fundamental activity for individuals, but human decision making is often subject to biases. The findings of this study provide useful insights into decision quality improvement, highlighting the importance of SEAI in the face of information overload.
Originality/value
This study integrates self-efficacy into the analysis of the relationship between information sources and decision making, presenting a new perspective for decision-making research and practice alike.
Details
Keywords
Bo Zeng, Hongwei Liu, Hongzhou Song, Zhe Zhao, Shaowei Fan, Li Jiang, Yuan Liu, Zhiyuan Yu, Xiaorong Zhu, Jing Chen and Ting Zhang
The purpose of this paper is to design a multi-sensory anthropomorphic prosthetic hand and a grasping controller that can detect the slip and automatically adjust the grasping…
Abstract
Purpose
The purpose of this paper is to design a multi-sensory anthropomorphic prosthetic hand and a grasping controller that can detect the slip and automatically adjust the grasping force to prevent the slip.
Design/methodology/approach
To improve the dexterity, sensing, controllability and practicability of a prosthetic hand, a modular and multi-sensory prosthetic hand was presented. In addition, a slip prevention control based on the tactile feedback was proposed to improve the grasp stability. The proposed controller identifies slippages through detecting the high-frequency vibration signal at the sliding surface in real time and the discrete wavelet transform (DWT) was used to extract the eigenvalues to identify slippages. Once the slip is detected, a direct-feedback method of adjusting the grasp force related with the sliding times was used to prevent it. Furthermore, the stiffness of different objects was estimated and used to improve the grasp force control. The performances of the stiffness estimation, slip detection and slip control are experimentally evaluated.
Findings
It was found from the experiment of stiffness estimation that the accuracy rate of identification of the hard metal bottle could reach to 90%, while the accuracy rate of identification of the plastic bottles could reach to 80%. There was a small misjudgment rate in the identification of hard and soft plastic bottles. The stiffness of soft plastic bottles, hard plastic bottles and metal bottles were 0.64 N/mm, 1.36 N/mm and 32.55 N/mm, respectively. The results of slip detection and control show that the proposed prosthetic hand with a slip prevention controller can fast and effectively detect and prevent the slip for different disturbances, which has a certain application prospect.
Practical implications
Due to the small size, low weight, high integration and modularity, the prosthetic hand is easily applied to upper-limb amputees. Meanwhile, the method of the slip prevention control can be used for upper-limb amputees to complete more tasks stably in daily lives.
Originality/value
A multi-sensory anthropomorphic prosthetic hand is designed, and a method of stable grasps control based on slip detection by a tactile sensor on the fingertip is proposed. The method combines the stiffness estimation of the object and the real-time slip detection based on DWT with the design of the proportion differentiation robust controller based on a disturbance observer and the force controller to achieve slip prevention and stable grasps. It is verified effectively by the experiments and is easy to be applied to commercial prostheses.