Search results

This paper aims to assess the feasibility of additively manufactured wind tunnel models. The additively manufactured model was used to validate a computational framework allowing the evaluation of the performance of five wing models.

An optimized fighter wing was additively manufactured and tested in a low-speed wind tunnel to obtain the aerodynamic coefficients and deflections at different speeds and angles of attack. The flexible wing model with optimized curvilinear spars and ribs was used to validate a finite element framework that was used to study the aeroelastic performance of five wing models. As a computationally efficient optimization method, homogenization-based topology optimization was used to generate four different lattice internal structures for the wing in this study. The efficiency of the spline-based optimization used for the spar-rib model and the lattice-based optimization used for the other four wings were compared.

The aerodynamic loads and displacements obtained experimentally and computationally were in good agreement, proving that additive manufacture can be used to create complex accurate models. The study also shows the efficiency of the homogenization-based topology optimization framework in generating designs with superior stiffness.

To the best of the authors’ knowledge, this is the first time a wing model with curvilinear spars and ribs was additively manufactured as a single piece and tested in a wind tunnel. This research also demonstrates the efficiency of homogenization-based topology optimization in generating enhanced models of different complexity.

A new coupled model is developed to simulate the interaction between fluid droplet collisions on discrete particles (DPs) by using mathematic function.

In this model, the smoothed particle hydrodynamics (SPH) is used based on the kernel function and the time step which takes into consideration to the fluid domain in accordance with the discrete element method (DEM) with resistance function. The interaction between fluid and DPs consists of three parts, which are repulsive force, viscous shear force and attractive force caused by the capillary action. The numerical simulation of droplet collision on DPs presents the whole process of droplet motion. Otherwise, an experimental data were conducted to record the realistic process for verification.

The comparison result indicated that the numerical simulation is capable of capturing the entire process for droplet collision on DPs.

However, based on the difference of experimental environment, type of the DP and setups, the maximum spreading dimeters of could not fit the experimental data exactly.

In sum, the coupled SPH-DEM method simulation shows that the coupled model of SPH-DEM developed an entire effectiveness process for fluid–solid interaction problem.

The quality of the unstructured mesh has a considerable impact on the stability and accuracy of aerodynamic simulation in computational fluid dynamics (CFD). Typically, engineers spend a significant portion of their time on mesh quality evaluation to ensure a valid, high-quality mesh. The extensive manual interaction and a priori knowledge required to undertake an accurate and timely evaluation process have become a bottleneck in the idealized efficient CFD workflow. This paper aims to introduce a neural network-based quality evaluation approach for unstructured meshes to enable higher efficiency and the level of automation.

The paper investigates the capability of deep neural networks for the quality evaluation of unstructured meshes. For training the network, we build a training dataset for mesh quality learning algorithms. The dataset contains a rich variety of unstructured aircraft meshes with different mesh sizes, densities, cell distribution, growth ratios and cell numbers to ensure its diversity and availability. We also design a neural network, AircraftNet, to learn the effect of mesh quality on the convergent properties of the numerical solutions. The proposed network directly manipulates raw point data in mesh source files rather than passing it to an intermediate data representation. During training, AircraftNet extracts non-linear quality features from high-dimensional data spaces and then automatically predicts the overall quality of the input unstructured mesh.

The paper provides a series of experimental results on GPUs. It shows that AircraftNet is able to effectively analyze the quality-related features like mesh density and distribution from the extracted features and achieve high prediction accuracy on the proposed dataset with even a small number of training runs.

Because of the limited training dataset, the research results may lack generalizability. Therefore, researchers are encouraged to test the proposed propositions further.

The paper publishes a benchmarking dataset for mesh quality learning algorithms and designs a novel neural network approach for unstructured mesh quality evaluation.

Estimation of (in)efficiency became a popular practice that witnessed applications in virtually any sector of the economy over the last few decades. Many different models were deployed for such endeavors, with Stochastic Frontier Analysis (SFA) models dominating the econometric literature. Among the most popular variants of SFA are Aigner, Lovell, and Schmidt (1977), which launched the literature, and Kumbhakar, Ghosh, and McGuckin (1991), which pioneered the branch taking account of the (in)efficiency term via the so-called environmental variables or determinants of inefficiency. Focusing on these two prominent approaches in SFA, the goal of this chapter is to try to understand the production inefficiency of public hospitals in Queensland. While doing so, a recognized yet often overlooked phenomenon emerges where possible dramatic differences (and consequently very different policy implications) can be derived from different models, even within one paradigm of SFA models. This emphasizes the importance of exploring many alternative models, and scrutinizing their assumptions, before drawing policy implications, especially when such implications may substantially affect people’s lives, as is the case in the hospital sector.

Tip leakage vortex flow (TLV) is a common flow phenomenon in the axial-flow hydraulic machinery. High-efficiency simulation of TLV is still not an easy task because of the complex turbulent vortex-cavitation interactions. As an important basis of CFD, turbulence model directly affects the efficient computation of TLV. The purpose of this paper is to evaluate the newly developed MST turbulence model in predicting the TLV flows.

By using the MST turbulence model and the ZGB cavitation model, numerical simulations of the TLV generated by a NACA0009 hydrofoil were performed under the cavitation-free and cavitation conditions, and the results were compared with the available experimental data.

The important features of TLV are well captured by the MST-based simulation scheme, and the problem of under-predicting the cavitating TLV tube is well solved. Turbulent viscosity is reasonably adjusted in the TLV core regions, and the LES-like mode is activated, which is beneficial to obtain more turbulent information on the same URANS grids. The requirements of grid size and time step of the MST model are much lower than that of the LES method, thereby weighing a good balance between the simulation accuracy and computation cost.

The MST turbulence model is suitable for the high-efficiency simulation of the TLV flows, which can lay a good foundation for efficient engineering computations of the cavitating TLV in the axial-flow hydraulic machinery.

Political factors play a crucial role in China's initial public offering (IPO) market due to its distinctive institutional context (i.e. “economic decentralization” and “political centralization”). Given the significant level of IPO underpricing in China, we examine the impact of local political uncertainty (measured by prefecture-level city official turnover rate) on IPO underpricing.

Using 2,259 IPOs of A-share listed companies from 2001 to 2019, we employ a structural equation model (SEM) to examine the channel (voluntarily lower the issuance price vs aftermarket trading) through which political uncertainty affects IPO underpricing. We check the robustness of the results using bootstrap tests, adopting alternative proxies for political uncertainty and IPO underpricing and employing subsample analysis.

Local official turnover-induced political uncertainty increases IPO underpricing by IPO firms voluntarily reducing the issuance price rather than by affecting investor sentiment in aftermarket trading. These relations are stronger in firms with pre-IPO political connections. The effect of political uncertainty on IPO underpricing is also contingent upon the industry and the growth phase of an IPO firm, more pronounced in politically sensitive industries and firms listed on the growth enterprise market board.

Local government officials in China usually have a short tenure and Chinese firms witness significantly severe IPO underpricing. By introducing the SEM model in studying China IPO underpricing, this study identifies the channel through which local government official turnover to political uncertainty on IPO underpricing.

This study aims to analyse the geographical distribution of global research activities and to investigate the knowledge diffusion embodied in scientific papers.

The geographical summary of Frontiers articles displays the number of visits and categorizes where the visitors hail from. This study uses the records of 23,798 articles published in 16 Frontiers journals from 2007 to 2015 to analyse the geographical distribution of article visits at both country and city levels. The process of knowledge diffusion is investigated on the basis of the different visiting patterns of new and old papers.

Most article visits are concentrated around major metropolitan areas and some high-tech clusters. The top “visiting countries” include both developed countries and developing countries, and the USA and China are two major players. Publishing cities dominate article visits for new papers; as time passes, there is diffusion from the publishing cities to a broader area.

The data on visiting for open access articles may be generated from various repositories besides the publishers’ websites; these data are ignored, as they are not significant enough to have much influence. There is also a lack of a basic theory in the data processing of outliers in the data set. In addition, only static results are given in this paper, as the data were collected on one day, for one time. A longer time period is necessary to track the dynamic diffusion process of the observations.

Introduction of usage data will propose a novel way to analyse research activities and track knowledge diffusion.

The visiting data of articles offer a new way to investigate research activities at the city level in a detailed and timely manner, for the geographical distribution of research activities and the research resource allocation of a specific country to be explored.

This study measured the research activities of scientific papers by examining the usage data. Compared with previous studies that focused on the geographical distribution of scientific activities using publication data, citation data and even altmetrics data, usage data are at the forefront of this research. Therefore, usage data offer a fresh perspective on methodology, providing more detailed and real-time information.

Recent studies have indicated that digital transformation can benefit an organization’s strategic renewal. However, there is little knowledge on how business executives engage in digital transformation for this purpose, especially in the service sectors of emerging markets. Therefore, this study aims to examine how business managers accomplish strategic renewal through digital transformation in emerging markets.

The authors conducted a longitudinal single case study of a leading business firm in China’s real estate industry, China Overseas Land & Investment Ltd. (COLI). Results of the analysis of semistructured interviews and rich secondary data allowed us to better understand how business managers react to changing customer demands by building and implementing divergent digital tools to fulfill strategic renewal.

The results showed that business executives of COLI developed the Whole Life Cycle Management System, to achieve strategic renewal. The system benefits resource allocation and potential adjustments to strategic goals. This study also helps update the organizational structure of the marketing and consumer services departments, helping better satisfy consumers’ demands and waste fewer resources. Thus, COLI accomplished structural, contextual and leadership-based ambidexterity.

This study provides a fresh understanding of the link between digitalization and strategic renewal by providing a fine-grained analysis of leading service providers in emerging markets. To the best of the authors’ knowledge, this study is among the first to investigate the role of digital transformation in strategic renewal from an ambidexterity perspective.

This paper aims to assess the impact of research in the field of scientometrics by using the altmetrics (social media metrics) approach.

This is an applied study which uses scientometric and altmetrics methods. The research population consists of the studies and their citations published in the two core journals (Scientometrics and Journal of Informetrics) in a period of five years (included 1,738 papers and 11,504 citations). Collecting and extracting the studies directly was carried from Springer and ScienceDirect databases. The Altmetric Explorer, a service provided by Altmetric.com, was used to collect data on studies from various sources (www.altmetric.com/). The research studies with the altmetric scores were identified (included 830 papers). The altmetric scores represent the quantity and quality of attention that the study has received on social media. The association between altmetric scores and citation indicators was investigated by using correlation tests.

The findings indicated a significant, positive and weak statistical relationship between the number of citations of the studies published in the field of scientometrics and the altmetric scores of these studies, as well as the number of readers of these studies in the two social networks (Mendeley and Citeulike) with the number of their citations. In this study, there was no statistically significant relationship between the number of citations of the studies and the number of readers on Twitter. In sum, the above findings suggest that some social networks and their indices can be representations of the impact of scientific papers, similar citations. However, owing to the weakness of the correlation coefficients, the replacement of these two categories of indicators is not recommended, but it is possible to use the altmetrics indicators as complementary scientometrics indicators in evaluating the impact of research.

Investigating the impact of research on social media can reflect the social impact of research and can also be useful for libraries, universities, and research organizations in planning, budgeting, and resource allocation processes.