Gilbert Justin Jose Nesamani, Sunil Chandrakant Joshi, Zhanli Jin, Poh Keong Chan and Soon Cheng Lee
This paper seeks to provide an insight into the design and development of the thermal test model (TTM) of X‐Sat, a 120 kg class micro‐satellite, being developed at the Centre…
Abstract
Purpose
This paper seeks to provide an insight into the design and development of the thermal test model (TTM) of X‐Sat, a 120 kg class micro‐satellite, being developed at the Centre. This model was specifically constructed for carrying out a thermal balance test (TBT) in a 4 m diameter vertical thermal vacuum chamber.
Design/methodology/approach
The construction of the thermal model followed a structural mock‐up model which was modified thermally to suit the purpose. Specific and careful consideration was given to the geometry and, more importantly, thermal characteristics such as thermal mass, surface properties, etc. to mimic the actual satellite configuration as closely as possible. Test plans were devised to qualify the fabricated components to meet the out‐gassing and other thermal requirements for the model. Design and qualification of supporting frame and linkages for TBT are also covered.
Findings
It is possible to simulate the thermal characteristics of a micro‐satellite in orbit under a different mission scenario through proper scaling and using alternative material options while developing TTM.
Originality/value
The paper discusses in detail the simplified cost‐effective approach of constructing TTM and also outlines the various issues to be considered for a TBT. It provides valuable information needed for micro‐satellite designers.
Details
Keywords
Tao Wang, Zhanli Liu, Yue Gao, Xuan Ye and Zhuo Zhuang
The interaction between hydraulic fracture (HF) and natural fracture (NF) in naturally fractured rocks is critical for hydraulic fracturing. This paper aims to focus on…
Abstract
Purpose
The interaction between hydraulic fracture (HF) and natural fracture (NF) in naturally fractured rocks is critical for hydraulic fracturing. This paper aims to focus on investigating the development of tensile and shear debonding zone on the NF caused by the stresses produced by HF, and the influence of NF’s debonding behavior on the interaction between HF and NF.
Design/methodology/approach
Theoretically, tensile and shear debonding modes of NF are considered, two dimensionless parameters are proposed to characterize the difficulty of tensile and shear failure of NF, respectively. Numerically, a finite element model combining the extended finite element method and cohesive zone method (CZM) is proposed to study NF’s debonding behavior and its influence on the interaction between HF and NF.
Findings
Both theoretical analysis and numerical simulation show the existence of two debonding modes. The numerical results also show that the HF can cross, offset or propagate along the NFs depending on the parameters’ value, resulting in different fracture network and stimulated reservoir volume. When they are large, the NF’s debonding area is small, HF tends to cross the NF and the fracture network is simple; when they are small, the NF’s debonding area is large, HF will propagate along the NF. In addition, HF is easier to propagate along with NF under tensile debonding mode while it is easier to pass through NF under shear debonding mode.
Originality/value
The theoretical and numerical considerations are taken into account in the influence of the debonding of NFs on the interaction between HFs and NFs and the influence on the formation of the fracture network.
Details
Keywords
Vajiha Mozafary and Pedram Payvandy
The purpose of this paper is to conduct a survey on research in fabric and cloth simulation using mass spring model. Also in this paper some of the common methods in process of…
Abstract
Purpose
The purpose of this paper is to conduct a survey on research in fabric and cloth simulation using mass spring model. Also in this paper some of the common methods in process of fabric simulation in mass spring model are discussed and compared.
Design/methodology/approach
This paper reviews and compares presented mesh types in mass spring model, forces applied on model, super elastic effect and ways to settle the super elasticity problem, numerical integration methods for solving equations, collision detection and its response. Some of common methods in fabric simulation are compared to each other. And by using examples of fabric simulation, advantages and limitations of each technique are mentioned.
Findings
Mass spring method is a fast and flexible technique with high ability to simulate fabric behavior in real time with different environmental conditions. Mass spring model has more accuracy than geometrical models and also it is faster than other physical modeling.
Originality/value
In the edge of digital, fabric simulation technology has been considered into many fields. 3D fabric simulation is complex and its implementation requires knowledge in different fields such as textile engineering, computer engineering and mechanical engineering. Several methods have been presented for fabric simulation such as physical and geometrical models. Mass spring model, the typical physically based method, is one of the methods for fabric simulation which widely considered by researchers.