Decheng Li, Tiannian Zhou, Zegong Liu and Jian Wang
The purpose of this study is to investigate the transport phenomena of smoke flow in a semi-open vertical shaft.
Abstract
Purpose
The purpose of this study is to investigate the transport phenomena of smoke flow in a semi-open vertical shaft.
Design/methodology/approach
The large eddy simulation (LES) method was used to model the movement of fire-induced thermal flow in a full-scale vertical shaft. With this model, different fire locations and heat release rates (HRRs) were considered simultaneously.
Findings
It was determined that the burning intensity of the fire is enhanced when the fire attaches to the sidewall, resulting in a larger continuous flame region in the compartment and higher temperatures of the spill plume in the shaft compared to a center fire. In the initial stage of the fire with a small HRR, the buoyancy-driven spill plumes incline toward the side of the shaft opposite the window. Meanwhile, the thermal plumes are also directed away from the center of the shaft by the entrained airflow, but the inclination diminishes as HRR increases. This is because a greater HRR produces higher temperatures, resulting in a stronger buoyancy to drive smoke movement evenly in the shaft. In addition, a dimensionless equation was proposed to predict the rise-time of the smoke plume front in the shaft.
Research limitations/implications
The results need to be verified with experiments.
Practical implications
The results could be applied for design and assessment of semi-open shafts.
Originality/value
This study shows the transport phenomena of smoke flow in a vertical shaft with one open side.
Details
Keywords
Bingyou Jiang, Zegong Liu, Shulei Shi, Feng Cai, Jian Liu, Mingyun Tang and Baiquan Lin
The purpose of this paper is to understand a flameproof distance necessary to avoid the flame harms to underground personnel which may have great significance to the safety of…
Abstract
Purpose
The purpose of this paper is to understand a flameproof distance necessary to avoid the flame harms to underground personnel which may have great significance to the safety of underground personnel and the disaster relief of gas explosions in coal mines.
Design/methodology/approach
Through a roadway with a length of 100 m and a cross-section area of 80 mm×80 mm, the flame propagation of premixed methane-air deflagrations were simulated by using AutoReaGas software for various fuel concentrations (7, 8, 9.5, 11, and 14 percent), fuel volumes (0.0128, 0.0384, 0.064, and 0.0896 m3), initial temperatures (248, 268, 288, 308, and 328 K), and initial pressures (20, 60, 101.3, 150, and 200 kPa).
Findings
The maximum combustion rate for each point follows a changing trend of increasing and decreasing with the distance increasing from the ignition source, and it increases with the fuel volume increasing or the initial pressure increasing, and decreases with the initial temperature increasing. However, increasing the initial temperature increases the flame arrival time for each point. The flameproof distance follows a changing trend of increasing and decreasing with the fuel concentration increasing, and it linearly increases with the fuel volume increasing or the initial temperature increasing. However, the flameproof distances are all 17 m for various initial pressures.
Originality/value
Increasing initial temperature increases flame arrival time for each test point. Flameproof distance increases and then decreases with fuel concentration increasing. Increasing fuel volume or initial temperature linearly increases flameproof distance. Initial pressure has little impact on the flameproof distance.