Search results

The paper purposes a novel SFPM machine topology with radial and circumferential permanent magnets (PMs). The paper aims to discuss this issue.

In order to reduce the flux leakage in the stator-outer region and consequently achieve higher magnetic material utilization in switched flux permanent magnet (SFPM) machine, a novel topology with radial and circumferential PMs is proposed. This topology (SFRCPM) has the same structure as conventional SFPM (CSFPM) machine except of the additional set of radially magnetized PMs located around the back iron and surrounded by a laminated ring frame. Using finite element analysis (FEA) the influence of the design parameters on the performance is investigated in order to obtain an effective optimization procedure. Internal and external rotor SFRCPM machines with either NdFeB or ferrite magnets are investigated, optimized and compared with the CSFPM machine having the same size, copper loss and stator/rotor pole combination.

It is concluded that comparing SFRCPM with its CSFPM machine counterpart, internal rotor SFRCPM machine can achieve high PM flux-linkage per magnet volume, however reduced slot area leads to low output torque, whereas external rotor SFRCPM machine can produce higher torque and torque per magnet volume.

This paper proposes a novel SFPM machine topology.

The purpose of this paper is to investigate and compare the influence of end-effect on the torque-speed characteristics of three conventional switched flux permanent magnet (SFPM) machines having different stator/rotor pole combinations, i.e. 12/10, 12/13 and 12/14 as well as three novel topologies with less permanent magnets (PMs), i.e. multi-tooth, E-core and C-core.

SFPM machines combine the advantages of simple and robust rotor and easy management of the temperature due to the location of the PMs and armature windings on the stator. However, due to spoke location of the PMs a large flux leakage in the end region, i.e. end-effect, can be observed which could result in a large reduction in the electromagnetic performance. Therefore, the influence of end-effect on the torque-speed characteristics is investigated. 3D-finite element analyses (FEA) results are compared with their 2D-FEA counterparts in order to account for the end-effect influence.

It has been concluded that due to end flux leakage, lower torque capability in the constant torque region is observed in the six machines. However, improved flux-weakening capability in the conventional machines can be exhibited at high current levels, whereas due to the large inductance lower power capability in the multi-tooth, E-core and C-core machines is obtained.

The influence of temperature rise on the performance is not included.

This paper has analysed the influence of end-effect on the torque-speed characteristics of several SFPM machines.

The purpose of this paper is to evaluate the cogging torque in a surface-mounted permanent magnet (SPM) machine with both uniformly and non-uniformly segmented stator cores and to find out the optimal solution of stator core segmenting.

The cogging torque with segmented stators is synthesized from a single slot model, and analytical prediction is given to analyze the cogging torque with both uniformly and non-uniformly segmented stators. Finite element method (FEM) is used to figure out the electromagnetic field and validate the analytical prediction. Moreover, models with various shapes and positions of connecting tongues between the stator core segments are explored to achieve the optimal design.

The cogging torque is found to be greatly related to the number of segments and the electrical angle between adjacent additional air gaps caused by the tolerance of stator segments. Different shapes of the connecting tongues are tested and proved to be of great importance to the flux density, both radial and tangential, and therefore affect the cogging torque. Finally, position of the connecting tongues is perceived to have little influence on the performance of machine.

By utilizing analytical prediction and FEM calculation, the optimal solution is discussed to minimize the cogging torque in the SPM machine from the perspective of the stator core segmentation.

This paper establishes formula of cogging torque with segmented stators and predicts the variation of cogging torque with analytical method. Besides, different combinations of segments are compared and measures to reduce the cogging torque produced by the segmentation are proposed.

The purpose of this study is to investigate a novel rotor design model to improve the technical performance of a superconducting synchronous generator.

Superconducting synchronous generators with a modular rotating cryostat for a single coil of the superconducting winding instead of an old-style single cryostat in which all rotor components are cold are briefly discussed. Subsequently, a new method of cryostat arrangement in the magnetic system of a rotor is considered. Different options were compared for the cryostat placement. The advantages of the novel rotor design model are noted.

In the novel rotor design model, the leakage coefficient of the excitation winding decreases, and the air gap magnetic flux increases, which will save on a superconductor material.

For the purposes of this investigation, a finite element study of flux distribution in the cross section of a superconducting synchronous generator with a 10 MW rating at 10 rpm was conducted, and the magnetic fluxes and air gap flux densities were obtained for different modes. For direct-drive superconducting synchronous generators with distributed winding and different pole numbers, the calculations of magnetic fluxes were carried out by calculating the magnetic conductivities.

A new method of the cryostat arrangement in the magnetic system of a rotor has been classified as an invention and was protected by a patent. This paper is directly applicable to the field of superconducting synchronous generators.

The purpose of this paper is to investigate the influence of end‐effect and cross‐coupling on the torque‐speed characteristics of switched flux permanent magnet (SFPM) machines.

The torque‐speed characteristics are predicted using two different methods. These are direct and indirect finite element methods, at different cross‐coupling levels, namely, full cross‐coupling on both PM flux linkage and dq‐axis inductances, partial cross‐coupling on the PM flux linkage only and without cross‐coupling.

The influence of the cross‐coupling on dq‐axis inductances of the studied machine is relatively small. However, it is more significant on the PM flux linkage. Therefore, the partial cross‐coupling model, which is much easier and faster, exhibits almost the same accuracy as the full cross‐coupling model. Furthermore, the end‐effect causes a large reduction in torque‐speed characteristics. However, such a reduction is more significant in the flux weakening operation region.

This is the first time that the influence of end‐effect of SFPM machines on the torque‐speed characteristics, especially in flux weakening region, and on the dq‐axis inductances has been investigated.

Permanent magnet linear synchronous machines (PMLSMs) have large thrust ripple due to the longitudinal end effect caused by the finite length of the armature compared with rotary machines. The purpose of this paper is to analyze the influence of electric loading on thrust ripple performances based on a 12 slots/14 poles (12S/14P) PMLSM. Furthermore, the method of skewed PMs to reduce thrust ripple is investigated based on multi slices 2D finite element (FE) models.

The thrust ripple of PMLSM under open-circuit condition results from the slotting and the longitudinal end effects. Therefore, periodical model has been designed to clarify the effect of the longitudinal end effect. Under on-load condition, the thrust ripple increases and exhibits an effective component of thrust force. To analyze the thrust ripple under on-load condition, frozen permeability (FP) technique is employed. In addition, the method of skewed PMs is analyzed in this paper to obtain more smooth thrust force performance. The effectiveness of skewing accounting for skew angles, step skew numbers and slot/pole number combinations was highlighted.

The longitudinal end effect dominates the thrust ripple of PMLSM in both cases, i.e., open-circuit and on-load conditions. Under on-load condition, the second harmonic component of thrust ripple related to flux linkage harmonics increases significantly. Moreover, the effectiveness of skewed PMs is largely reduced with the increase of magnetic saturation. At last, a proper skew angle and step skew number are obtained for the conventional PMLSM with fractional-slot winding.

By 60 electrical degrees and two or three step skewed PMs, the thrust ripple can be decreased to a tolerable limite for conventional PMLSM. The thrust ripple harmonics contributed by longitudinal end effect and flux linkage harmonics are analyzed, respectively, which is beneficial to exploring other techniques such as adding end auxiliary teeth to obtain lower thrust force pulsation.

The present business environment of accelerated complexity, ambiguity, uncertainty and volatility seems not to be settling down soon. Today’s business world is consistently bombarded with turmoil and unprecedented change. This makes it very difficult for organisations to accurately predict possible future opportunities and threats. To overcome this scenario, organisations need to fully embrace and implement agility in their operations. However, for organisations to develop a considerable level of agility that corresponds to the current hypercompetitive and volatile environment, premium needs to be placed on agile leadership. Agile leaders are capable of setting the guiding principles, develop strategies and build mechanisms that will lead to smooth transition to organisational agility (OA). These leaders give directions on how to make organisations agile and ensure that there is a leadership culture that models and promotes a holistic agility in the organisation. The primary purpose of this chapter is to establish the position of agile leadership in determining OA. The study departs from previous studies by using empirical reviews to depict the significance of agile leadership and its key roles on OA. Specifically, the concept, evolution and characteristics of OA are explored, as well as its benefits and multidimensional nature are discussed. Furthermore, the chapter sheds light on agile leadership, levels of leadership agility and competencies of successful agile leaders. The chapter concludes that the leadership style suitable for OA is agile leadership. This calls for business investments in agile capacity building and development of frameworks suitable for agile leadership.

The purpose of this paper is to elaborate the algorithm and computer code for the structure optimization of the outer rotor permanent magnet brushless DC motor and to execute optimization of selected motor structure using the non‐deterministic procedure.

The mathematical model of the device includes the electromagnetic field equations with the nonlinearity of the magnetic core taken into account. The numerical implementation is based on the finite element method and stepping procedure. The genetic algorithm has been applied for the optimization. The computer code has been elaborated.

The elaborated computer software has been applied for the optimization and design of BLDC motors. The elaborated algorithm has been tested and a good convergence has been attained.

The presented approach and computer software can be successfully applied to the design and optimization of different structure of BLDC motors.

The purpose of this paper is to present an improved conformal mapping (ICM) method that simultaneously considers the influence of relative recoil permeability of PMs, the armature reaction, the stator slotting, and the magnetic saturation on determination of the PM operating point in its different parts.

The ICM method is a time-effective method that considers the magnetic saturation by suitable increments in air-gap length under each tooth and also the width of slot openings. In this paper, the analytical and numerical conformal mappings such as the Schwarz-Christoffel (SC) mapping are used for magnetic field analysis due to the permanent magnets and the armature reaction in one slotted air gap. The field solution in the slotted air gap is obtained through the modulation of field solution in one slotless air-gap using the complex air-gap permeance.

The ICM method can consider the magnetic saturation in different electric loadings, and also the variation of PM operating points in its different parts.

The ICM method is applied to one surface mounted permanent magnet (SMPM) motor and is verified by comparing with the corresponding results obtained through finite element method (FEM), and frozen permeability finite element method (FP-FEM).

This paper presents an ICM method with a new technique for saturation effect modeling, which can be used to separate and calculate the on-load components of air-gap field and torque.

The purpose of this paper is to study the performance and efficiency of two different permanent magnet (PM) machine rotor configurations under magnetic core saturation conditions.

Since the accuracy of conventional analytical methods is limited under saturation conditions, a finite element model of the machine is built; which is used to predict the various losses over its operating range such as eddy current, hysteresis, copper and magnet losses. Using this model, the efficiency map of the machine is derived which is used to investigate its efficiency corresponding to a heavy vehicle drive cycle. The performance of two different rotor designs are studied and the efficiency of each design is compared under the considered drive cycle.

It has also been proved that the performance advantage due to reluctance torque in the v-shaped interior PM (IPM) machine is offset by its core steel saturation at higher current/torque levels. The magnitude of iron losses in the IPM is higher than that in the surface PM (SPM) machine, however, the magnet loss in the SPM is higher than in the IPM.

An investigation of the performance of the IPM design in comparison with the SPM∼design under magnetic saturation conditions is not known to the authors. Hence, in this paper, it will be determined if the assumed performance advantage of the IPM over the SPM still holds true under these conditions.