Search results

Additive lamination manufacturing (ALM), as a novel additive manufacturing technology, builds up the geometry via the lamination of fiber-reinforced polymer (FRP) fabric laterally, rendering it suitable for fabricating large-scale Stay-in-Place concrete formwork. This paper aims to investigate the control parameters and structure performance of ALM and assess its application for the fabrication of large-scale concrete formwork.

Based on previous feasibility studies, this research systematically investigates the control and material parameters that influence horizontal and vertical extrusion speeds, as well as the overall quality of ALM. Once the system parameters are established, a series of prototypes are fabricated and tested to validate the tensile strength of the formwork and its reinforcement capabilities. In addition, this study assesses the potential geometric freedom and implementation constraints of ALM.

This research identifies the essential control parameters for path planning in ALM and examines their impact on fabrication. In addition, this paper evaluates ALM’s strengths and limitations in producing concrete formwork for large-scale concrete structures, comparing these to industry benchmarks.

A critical challenge in additive manufacturing lies in its scalability and compatibility with existing construction processes. In comparison to concrete, FRP offers advantages such as being lighter, easier to handle and providing surface protection and reinforcement. These qualities make FRP superior for formwork and compatible with existing building standards. Despite its advantages and potential, the current path planning and control model in 3D printing do not apply to ALM due to its novel build-up process. Also, the performance of fabricated parts as part of integrated large-scale structures is yet to be studied.

In the early industrial age which with high intensity of machine and labor, using financial measurement index was good enough to tie in company’s mechanization and philosophy of management and been in efficiency. But being comply with “New Economic age,” a new economic environment is full of knowledge and information, the enterprise competition had changed from tangible assets, plants to intangible innovation ability of knowledge. As recognizing the new tendency by enterprise, they value gradually the growth and influence from learning. Practice of organization learning not only needs firm structure and be in coordination with both hardware and software, but also needs an affect measurement model to offer enterprise to estimate learning performance. It’s a good instrument of financial performance measure mold in the past years, But it’s for measuring the past, couldn’t formulate enterprise trend to future, hard to estimate investment for future, such as development of products, organization learning, knowledge management etc, as which intangible assets and knowledge ability just the key factors of being win around competition environment in the future. In 1992, Kaplan and Norton brought up Balance Scorecard (BSC) on Harvard Business Review, as an instrument helping enterprise to measure performance, which is being considered to be a most influence management instrument. It added non‐financial index such as customer, internal process and learning growth besides traditional financial index, as offering enterprise an index to measure and manage intangible assets and intellectual property. As being aware of organization learning is hard to be ignored in the new economic age, this research is based on learning and growth of BSC, and citing one national material company try to let the most difficult measurement performance of organization learning, to be estimate through BSC, analyze of factor and individual case, to discuss the company how to make the related strategy and vision of organization learning to develop learning and growth of the structure of BSC, subject the matter of out put factors to be discussed, and measure the outcomes as a result of research. The research affect offers (1) the base implement procedure of carrying out BSC; (2) the reference of formulating measurement index while enterprise using BSC to estimate performance of organization learning; (3) the possibility bottleneck maybe forcing while carrying out BSC, to be an improvement or preventive for enterprise.

The Communist revolution in China has led to the appearance in this country of increasing numbers of Chinese books in Russian translation. The Chinese names in Cyrillic transcription have presented many librarians and students with a new problem, that of identifying the Cyrillic form of a name with the customary Wade‐Giles transcription. The average cataloguer, the first to meet the problem, has two obvious lines of action, and neither is satisfactory. He can save up the names until he has a chance to consult an expert in Chinese. Apart altogether from the delay, the expert, confronted with a few isolated names, might simply reply that he could do nothing without the Chinese characters, and it is only rarely that Soviet books supply them. Alternatively, he can transliterate the Cyrillic letters according to the system in use in his library and leave the matter there for fear of making bad worse. As long as the writers are not well known, he may feel only faintly uneasy; but the appearance of Chzhou Ėn‐lai (or Čžou En‐laj) upsets his equanimity. Obviously this must be entered under Chou; and we must have Mao Tse‐tung and not Mao Tsze‐dun, Ch'en Po‐ta and not Chėn' Bo‐da. But what happens when we have another . . . We can hardly write Ch'en unless we know how to represent the remaining elements in the name; yet we are loth to write Ch'en in one name and Chėn' in another.

With the rapid advancement of technology, companies use new technologies to produce their products and services to maintain a competitive advantage. As companies alone cannot research and develop their technologies, they should use knowledge sources outside the organization that may exist throughout the world; hence, organizations need technology transfer. Because the success rate of technology transfer projects is low, the need to accurately assess and investigate the critical success factors of technology transfer projects is felt. In this regard, this study aims to identify and prioritize the critical success factors in technology transfer projects.

In this research, 56 critical success factor (CSF) were extracted from the context of the articles and were adjusted using experts’ opinions in different phases, as well as the fuzzy-Delphi approach. Finally, 15 factors were categorized in the form of steps of the technology transfer model: STAGE-GATE. In the next step, the set of criteria needed to prioritize CFSs was extracted from the literature and finalized with the help of the experts. Then, how each of the CSF influences the identified criteria was scored according to the organization’s export opinions. Finally, the priority of each key success factor was calculated using the additive ratio assessment (ARAS) method.

The results obtained for prioritization of the critical success factors show that experience in technology transfer in the transferee company, the existence of experienced technology transfer managers, sufficient organizational infrastructure and documenting project problems, achievements and experiences are four critical success factors of the technology transfer projects. Considering the long-term and short-term specific goals of the technology transfer process and the choice of technology in line with the company’s commercial strategy are also the critical success factors with the next priorities.

The combination of ARAS and step-wise weight assessment ratio analysis methods for identifying and prioritizing managerial decisions in the high-tech industries is a value of this research. Also, a combination of novel multi-attribute decision-making methods by the older framework of new product development is another contribution of this research.

Ceramic materials and glasses have become important in modern industry as well as in the consumer environment. Heat resistant ceramics are used in the metal forming processes or as welding and brazing fixtures, etc. Ceramic materials are frequently used in industries where a wear and chemical resistance are required criteria (seals, liners, grinding wheels, machining tools, etc.). Electrical, magnetic and optical properties of ceramic materials are important in electrical and electronic industries where these materials are used as sensors and actuators, integrated circuits, piezoelectric transducers, ultrasonic devices, microwave devices, magnetic tapes, and in other applications. A significant amount of literature is available on the finite element modelling (FEM) of ceramics and glass. This paper gives a listing of these published papers and is a continuation of the author's bibliography entitled “Finite element modelling of ceramics and glass” and published in Engineering Computations, Vol. 16, 1999, pp. 510‐71 for the period 1977‐1998.

The form of the paper is a bibliography. Listed references have been retrieved from the author's database, MAKEBASE. Also Compendex has been checked. The period is 1998‐2004.

Provides a listing of 1,432 references. The following topics are included: ceramics – material and mechanical properties in general, ceramic coatings and joining problems, ceramic composites, piezoceramics, ceramic tools and machining, material processing simulations, fracture mechanics and damage, applications of ceramic/composites in engineering; glass – material and mechanical properties in general, glass fiber composites, material processing simulations, fracture mechanics and damage, and applications of glasses in engineering.

This paper makes it easy for professionals working with the numerical methods with applications to ceramics and glasses to be up‐to‐date in an effective way.

Video game streaming (VGS) is emerging as an extremely popular, highly interactive, inordinately subscribed and very dynamic form of digital media. Incorporated environmental elements, gratifications and user pre-existing attitudes in VGS, this paper presents the development of an extended model of uses and gratification theory (EUGT) for predicting users' behavior in novel technological context.

The proposed model was empirically tested in VGS context due to its popularity, interactivity and relevance. Data collected from 308 VGS users and structural equation modeling (SEM) was employed to assess the hypotheses. Multi-model comparison technique was used to assess the explanatory power of EUGT.

The findings confirmed three significant types elements in determining VGS viewers' engagement, including gratifications (e.g. involvement), environmental cues (e.g. medium appeal) and user predispositions (e.g. pre-existing attitudes). The results revealed that emerging technologies provide potential opportunities for new motives and gratifications, and highlighted the significant of pre-existing attitudes as a mediator in the gratification-uses link.

This study is one of its kind in tackling the criticism on UGT of considering media users too rational or active. The study achieved this objective by considering environmental impacts on user behavior which is largely ignored in recent UGT studies. Also, by incorporating users pre-existing attitudes into UGT framework, this study conceptualized and empirically verified the higher explanatory power of EUGT through a novel multi-modal approach in VGS. Compared to other rival models, EUGS provides a more robust explanation of users' behavior. The findings contribute to the literature of UGT, VGS and users' engagement.