Search results

Profile measurement with boundary information plays a vital role in the detection of quality in the assembly of aviation parts. The purpose of this paper is to improve the evaluation accuracy of the aerodynamic shapes of airplanes, the profiles of large-sized parts need to be measured accurately.

In this paper, an accurate profile measurement method based on boundary reference points is proposed for the industrial stereo-vision system. Based on the boundary-reference points, the authors established a priori constraint for extracting the boundary of the measured part. Combining with the image features of background and the measured part, an image-edge compensation model is established to extract the boundary of the measured part. The critical point of a laser stripe on the edge of the measured part is extracted corresponding to the boundary constraint. Finally, as per the principle of binocular vision, the profile of the measured part is reconstructed.

Laboratory experiments validate the measurement accuracy of the proposed method which is 0.33 mm. In the analysis of results between the measured data and the theoretical model, the measuring accuracy of the proposed method was found to be significantly higher than that of the other traditional methods.

An aviation part was measured in the part-assembly shop by the proposed method, which verified the feasibility and effectiveness of this method. The research can realize the measurement of smooth surface boundary which can solve existing profile reconstruction problems for aviation parts.

According to the two-dimensional contour constraint, critical points of the laser strip sequence at the edge of measured part are extracted and the accurate profile reconstruction with the boundary is realized.

With rapid industrialization and urbanization, municipal solid waste (MSW) management has become a serious challenge worldwide, especially in developing countries. The Beijing Municipality is a representative example of many local governments in China that are facing MSW management issues. Although there have been studies in the area of MSW management in the literature, less attention has been devoted to developing a structured framework that identifies and interprets the barriers to MSW management in megacities, especially in Beijing. Therefore, this study focuses on identifying a comprehensive list of barriers affecting the successful implementation of MSW management in Beijing.

Through an extensive review of related literature, 12 barriers are identified and classified into five categories: government, waste, knowledge dissemination, MSW management process and market. Using an integrated approach including the decision-making trial and evaluation laboratory (DEMATEL), maximum mean de-entropy algorithm (MMDE) and interpretive structural modeling (ISM), a conceptual structural model of MSW implementation barriers is constructed to provide insights for industrial decision-makers and policymakers.

The results show that a lack of economic support from the government, imperfect MSW-related laws and regulations, the low education of residents and the lack of publicity of waste recycling knowledge are the main barriers to MSW management in Beijing. Combined with expert opinions, the paper provides suggestions and guidance to municipal authorities and industry practitioners to guide the successful implementation of MSW management.

The findings of this study can provide a reference for MSW management in other metropolises in China and other developing countries.

This study proposes a hybrid DEMATEL-MMDE-ISM approach to resolve the subjectivity issues of the traditional ISM approach and it analyzes the barriers that hinder MSW management practices in Beijing.

With the analysis of the causes of corruption, this study aims to investigate specific anti-corruption measures that can be implemented to reform the political system and the social climate of China.

This study examines 97 severe corruption cases of high-ranking officials in China, which occurred between 2012 and 2015. As this insinuates that both institutional and social corruption are major problems in China, the analysis delves into multiple facts of corruption, including different types, four primary underlying causes, and suggestions regarding the implementation of three significant governmental shifts that focus on investigation, prevention tactics and legal regulations.

China’s corruption is not only individual-based but also it has developed into institutional corruption and social corruption. Besides human nature and instinct, the causes of corruption can be organised into four categories, namely, social customs, social transitions, institutional designs and institutional operations. For the removed high-ranking officials, the formation of interest chains was an important underlying cause behind their corruption.

This study makes a significant contribution to the literature because this study provides a well-rounded approach to a complex issue by highlighting the significance of democracy and the rule of law as ways to regulate human behaviour to combat future corruption.

The prevalence of crises is a real phenomenon that demands proper planning and implementation of measures to preempt and curb its consequences on both national economies and business operations. Crisis is one of the concepts that cannot be overlooked, pervasive in nature, and does not necessarily denote negativity. Crisis is no longer an unusual, arbitrary, or minor characteristic of today's business environment. As far as the business environment continues to be volatile and unpredictable, it is unlikely that business organizations would be free from crises. Crises are noted to be a vital part of a business context and can serve as an avenue for positive change and creativity if the right tools and techniques are employed to properly manage them. On the other hand, crises can jeopardize the continued existence of the organization and obstruct the achievement of its goals. Thus, the debilitating ramifications of crises on business growth, survival and overall success calls for adoption of sustainable crisis management approaches in this new business world order that is framed by Industry 5.0, digitalization, and green business practices. The primary purpose of this article is to establish how modern crisis management methods could lead to sustainable organizational development. The current study departs from existing studies in the literature by systematically presenting methods to anticipate, solve, and transform business crises into advantage. The chapter also throws light on how organizations should manage business crises that may well be accelerated by Industry 5.0 and its components; digitalization and sustainable development.

The purpose of this study is to reduce the cracks, pores and unfused defects in arc welding, improve the crystalline structure of the weld, refine its grains and improve the mechanical properties.

Taking E690 marine steel as the research object, the experiment adopts a new process method of laser forging coupled arc welding. Welding for comparative experiments. Experiments show that the “V”-shaped groove arc welding process has a larger fusion area, but has pores, the arc current is 168 A, the arc voltage is 28 V and the welding speed is 600 mm/min.

It can be seen from tensile tests that the coupling welding process has the highest tensile strength and yield strength, 872 MPa and 692 MPa, respectively, and the fracture elongation is 29.29%. The single-beam laser forging coupled arc welding process has a distance of laser and wire of 6–8 mm, a laser wavelength of 1,064 nm and the highest weld fusion ratio. The microhardness test shows that the average hardness of single-beam laser forging in the weld zone is 487.54 HV, which is 10.30% higher than that of arc welding. The average hardness in the fusion zone is 788.08 HV, which is 14.52% higher than that of the arc welding process.

The originality of the experiment: proposed a new process method of coupling arc repair for offshore steel forging; adopted a new process method of simultaneous coupling of single-beam short-pulse laser, double-beam short-pulse laser and arc welding; and obtained effect of pulsed laser and arc composite repair on porosity and fusion of E690 marine steel welds.

In this work, the authors used reversible addition-fragmentation transfer (RAFT) polymerization to develop a new cationic acrylate modified epoxy resin emulsion for water-borne inkjet which have the advantages of both polyacrylate and epoxy resin. The emulsion was successfully used in the canvas coating for inkjet printing. This paper aims to contribute to the development of novel cationic emulsions for inkjet printing industry.

In this work, the epoxy acrylate was synthesized from RAFT agent and epoxy resin firstly. Cationic macromolecular emulsifier was prepared by RAFT polymerization, using 2,2’-Azobisisobutyronitrile as initiator, 2-(dimethylamino)ethyl methacrylate and styrene as monomer, which was directly used to prepare the emulsion. The influences of the amount of 2-(dimethylamino)ethyl methacrylate on particle size, zeta potential and water contact angle were studied. Finally, the cationic emulsion was used to print images by inkjet printing.

The emulsion has the smallest particle size, the highest potential and the highest water contact angle when the DM content is 13 Wt.%. The transmission electron microscopy analysis reveals the latex particles is core-shell sphere with the diameters in the range 120–200 nm. The emulsion was successfully used in the canvas coating for inkjet printing. This work will contribute to the development of novel cationic emulsions for inkjet printing industry.

The emulsion was successfully used in the canvas coating for inkjet printing. This work will contribute to the development of novel cationic emulsions for inkjet printing industry.

This paper aims to examine how the law may play a role in mediation by paying special attention to how the law is excluded from and included in the process of court mediation in China.

Hundred model court mediation cases selected by the Supreme People’s Court of China were analysed and reviewed.

The law is relevant in Chinese-style court mediation in four ways: first, judge-mediators are intended to use mediation to avoid resolving legal difficulties or challenges; second, judge-mediators consult the law to anticipate the losing party and the potential negative effects that might result from the adjudication; third, judge-mediators refer to the law to propose a mediation scheme or plan to guide the parties to settle; and fourth, judge-mediators would use the law as a bargaining chip in various ways to induce the parties to settle.

Standards should be set out for the use of law in the mediation process to standardise judge-mediators’ actions, to ensure that the law is not used coercively to push settlement, which would undermine the parties’ self-determination in mediation.

This paper provides an original understanding of how law affects the process, the outcomes and, ultimately, the nature of settlements that parties achieve through court mediation in China. This study contributes to the literature that argues that ethical norms and legal standards should be set to direct those legal evaluations.