Search results

The purpose of this paper is to theoretically analyze and experimentally demonstrate the investigation of and present a kind of sensing system for monitoring simultaneous temperature and strain measurements based on highly nonlinear fiber (HNLF) and single mode fiber (SMF).

First, the stimulated Brillouin scattering (SBS) characteristics of the HNLF have been studied, including the Brillouin gain bandwidth, Brillouin gain center frequency and SBS threshold. Second, based on the Brillouin gain center frequency, the Brillouin frequency shift coefficients of strain and temperature in HNLF have been studied. Third, the sensing and signal interrogation scheme for simultaneous monitoring of temperature and strain with high resolution has been presented.

It is found that the HNLF has a wider Brillouin gain bandwidth. The SBS threshold of HNLF is 78 mW, which is much larger than 7.9 mW of SMF. Also, the Brillouin frequency shift coefficients of strain and temperature in HNLF are 0.0308 and 0.413 MHz/°C, respectively.

The larger threshold of SBS is useful to avoid SBS under certain situations that Spontaneous Brillouin Scattering is necessary and should be applied. The technique is based on the fact that the Brillouin frequency shift coefficients of strain and temperature in HNLF are different from those in SMF. Therefore, the two-parameter monitoring can be achieved by producing SBS and obtaining the back-scattering Brillouin signal light simultaneously in HNLF and SMF.

With its worldwide fame for making action films, Hong Kong cinema has been defined as masculine. Action films, including the costumed martial arts films and the modern gangster films, have been a major genre in Hong Kong cinema from the 1960s on. Despite the dominant masculinity, women still play significant roles in some of these films. In fact, fighting women leave footprints in the history of Hong Kong cinema, which precede their counterparts in the West and even provide models for Hollywood after 2000.

This chapter focuses on the female characters portrayed by the acclaimed Hong Kong director Wong Kar-wai, whose works have an ambiguous connection to mainstream genres. He modifies Hong Kong action films and creates unconventional female characters such as the drug dealer in Chungking Express (1994), the killer dispatcher in Fallen Angels (1995), the swordswoman in Ashes of Time (1994), and the kung fu master in The Grandmaster (2013). Wong's films have been mush discussed in academia, but the gender images therein are quite ignored. With high intertextuality, these characters are used to question mainstream action films and redefine women's roles in male's cinematic space. In addition, via the writing of these women, Wong constructs an open and ambivalent post-colonial Hong Kong identity. This paper contextualises the figures of sword-wielding and gun-shooting women and examines how Wong Kar-wai deploys these images to articulate the cultural identity of a post-colonial city.

This study deals with one strategic issue for manufacturing firms operating in Asian emerging markets – technology commitment or investment. It compares two different approaches adopted by international manufacturing firms in China, one of the major emerging markets in the world. Analyzing the data from the 100 largest manufacturing firms (in terms of market share) competing in one of China’s manufacturing industries, i.e. electronics, this paper shows an interesting positive relationship between technology investment and firm performance in China’s manufacturing industries. This paper concludes with a discussion on the implications of the findings.

In this paper, a set of safe adaptive genetic algorithms (sGAs) is proposed based on the Splicing/Decomposable encoding scheme and the efficient speed‐up strategies developed by Xu et al.. The proposed algorithms implement the self‐adaptation of the problem representation, selection and recombination operators at the levels of population, individual and component which commendably balance the conflicts between “reliability” and “efficiency”, as well as “exploitation” and “exploration” existed in the evolutionary algorithms. It is shown that the algorithms converge to the optimum solution in probability one. The proposed sGAs are experimentally compared with the classical genetic algorithm (CGA), non‐uniform genetic algorithm (nGA) proposed by Michalewicz, forking genetic algorithm (FGA) proposed by Tsutsui et al. and the classical evolution programming (CEP). The experiments indicate that the new algorithms perform much more efficiently than CGA and FGA do, comparable with the real‐coded GAs — nGA and CEP. All the algorithms are further evaluated through an application to a difficult real‐life application problem: the inverse problem of fractal encoding related to fractal image compression technique. The results for the sGA is better than those of CGA and FGA, and has the same, sometimes better performance compared to those of nGA and CEP.

Given an intersection-free mesh surface S, the paper introduces a method to thicken S into a solid H located at one side of S. By such a surface-to-solid conversion operation, industrial users are able to fabricate a designed (or reconstructed) surface by rapid prototyping.

The paper first investigates an implicit representation of the thickened solid H according to an extension of signed distance function. After that, a partial surface reconstruction algorithm is proposed to generate the boundary surface of H, which retains the given surface S on the resultant surface.

Experimental tests show that the thickening results generated by the method give nearly uniform thickness and meanwhile do not present shape approximation error at the region of input surface S. These two good properties are important to the industrial applications of solid fabrication.

The input polygonal model is assumed to be intersection-free, where models containing self-intersection will lead to invalid thickening results.

A novel robust operation is to convert a freeform open surface into a solid by introducing no shape approximation error. A new implicit function gives a compact mathematical representation, which can easily handle the topological change on the thickened solids. A new polygonization algorithm generates faces for the boundary of thickened solid meanwhile retaining faces on the input open mesh.

This chapter critically evaluates whether football can attain recognition as a national sport in China. Article No. 11, released by the Chinese government in 2015, aimed to develop a new national strategy centralised on the sport of football to foster consumption and enhance national soft power. Consequently, this also means encouraging Chinese football fans to support the national football team. Comparing the significance of local football clubs and the national football team to Chinese football fans is deemed meaningless and unable to generate useful information to comprehend Chinese people's attitudes towards local and national communities. Through literature comparisons with established Chinese national sports such as Chinese martial arts, badminton and table tennis, the discussion reveals that football currently falls short of meeting the general criteria of invention and popularity to be considered a Chinese national sport. In the specific Chinese context, it also proves that football fails to meet the criterion of politics, hindering its identification as a national sport. Consequently, the chapter rebuts the assumption and advocates for the validity of comparing how fans assess their fandom for local and national football teams.

The purpose of this paper is to investigate the effects of verbal-imagery cognitive styles of information searching behavior of users in using the Web.

In all, 44 participants were recruited for this study. The participants’ cognitive styles were measured by using Riding's Cognitive Style Analysis test. Three search tasks were designed based on Kim's search task definitions. Moreover, an individual lab session was arranged and then participants’ memos were analyzed using content analysis.

In all, 48 strategies in four categories of behaviors in searching the Web were identified. There were associations between users’ cognitive styles and their information searching behavior. The participants’ selection of the search initiation behaviors varied, so that imagers suffered from more varied initial behavior than verbalizers. The verbalizers tended to search in a narrow area, then broadening the area and following structured navigation and reading behavior to process information, while imagers tended to search in a general area, then narrowing down the search and adopting mixed navigational styles and mixed behaviors to process information. This study revealed that there was a difference in search performance of verbalizers and imagers descriptively, as verbalizers spent more time compared to imagers and imagers visited more nodes than verbalizers for the tasks completion. In addition, the task was an important variable influencing the search performance. Based on the key findings (search initiation behaviors, formulating search queries, navigational behaviors, information processing behaviors), a conceptual pattern of Web searching and cognitive styles is presented.

The study provides a new understanding of Web users’ information search behavior based on cognitive styles which contributes to the theoretical basis of Web search research. It also raises various questions within the context of user studies

The paper adopted a mixed approach in the area of information searching on the Web. A valuable contribution lies in the methods developed.

The construction industry struggles in environmental and economic performance due to waste generation. Several studies have measured this waste in the construction industry of developing countries like India, Brazil, China, Nigeria and Iran, and proposed strategies to enhance the overall efficiency. But no such work exists in Pakistan's context. The construction industry of Pakistan contributes significantly to the country's gross domestic product (GDP). And with several mega projects in progress to overcome the energy crises and improve the infrastructure of the country, the absence of proper waste management policies and plans calls for empirical research. Therefore, this study quantifies and benchmarks material waste in the local context, its impact on project cost and the effect of multiple subcontracting arrangements on waste generation. It also proposes a conceptual waste management plan (WMP) for local conditions which can be generalized for developing countries.

This paper uses a mixed research approach by leveraging Saunders's research onion model. To benchmark the current wastage practices, quantitative data of material waste in the Pakistani construction industry are gathered through document review of accounting systems, inventory and payment records of 40 completed building projects. Using the data, the waste rate of different materials is measured along with their impact on cost. Additionally, the role of subcontracting arrangements in waste generation is also investigated. Also, semi-structured interviews are conducted with project managers of high- and low-performing construction organizations to propose a conceptual WMP for the local industry and developing countries.

The highest wasteful materials by quantity are wood, sand and concrete blocks, and those by cost are wood, bricks and steel. By quantity, 123% more material was used on average than the actual productive work. Also, the labor only (L-O) subcontracting arrangement causes maximum waste. Moreover, the difference between the highest (155%) and lowest wasting company (104%) is 51%, highlighting the proactive and resistive waste management culture and approach by the worst- and best-performing companies. Further, the impact of waste quantities is more than 2% of the project cost. Finally, a conceptual model consisting of measures at the project, industry and national levels is also proposed as a guide for developing countries.

The findings of this benchmarking study can help improve the project planning, execution and monitoring, and control practices by providing a better understanding of the material waste potential. This will help economize the construction industry and improve its sustainability.

This is the first benchmarking study that quantitatively measures material waste in the construction industry of Pakistan. It highlights that costly as well as sustainability-implicating materials are frequently wasted in the local construction projects. Also, this study correlates the wastage with subcontracting arrangements. Additionally, an original conceptual WMP is proposed that could help the industry improve its performance. The findings could help the construction professionals identify the loopholes in their material management practices and not only save money but also ensure better sustainability.

The purpose of this study is to advance and test a new construct, harmony voice. Furthermore, according to the social influence theory, the relationship between zhongyong, an essential Confucian orientation mode and voice behavior, and the moderating role of coworker’s regulatory focus (promotion focus and prevention focus) has been examined.

A field study has been designed to test our hypotheses. We used samples of 291 employee–coworker dyads from a variety of organizations in China to test this study’s hypotheses.

The results of this empirical study show that zhongyong is positively related to harmony voice. Coworkers’ promotion focus strengthens the positive effect of zhongyong on harmony voice, and coworkers’ prevention focus weakens the positive effect of zhongyong on harmony voice.

Traditionally defined voice and harmony voice might cause different risks to the voicer. However, how and what kinds of risks may be differently caused by these two types of voice behaviors have not been examined in this study. Future empirical research can explore the different effects of traditionally defined voice and harmony voice.

Managers responsible for managing Chinese employees should notice the difference in some important ways of thinking between Easterners and Westerners. Specifically, zhongyong may direct people to express issues related to work in ways that are different from those of their Western counterparts. Harmony voice can benefit the Chinese organization without disrupting organizational development.

By examining the relationship between zhongyong and harmony voice, we contribute to identifying antecedents of voice by using an emic research perspective.

We made significant theoretical contributions to voice literature. We developed the construct of harmony voice, and we examined the relationship between zhongyong and voice.

The future construction site will be pervasive, context aware and embedded with intelligence. The purpose of this paper is to explore and define the concept of the digital skin of the future smart construction site.

The paper provides a systematic and hierarchical classification of 114 articles from both industry and academia on the digital skin concept and evaluates them. The hierarchical classification is based on application areas relevant to construction, such as augmented reality, building information model-based visualisation, labour tracking, supply chain tracking, safety management, mobile equipment tracking and schedule and progress monitoring. Evaluations of the research papers were conducted based on three pillars: validation of technological feasibility, onsite application and user acceptance testing.

Technologies learned about in the literature review enabled the envisaging of the pervasive construction site of the future. The paper presents scenarios for the future context-aware construction site, including the construction worker, construction procurement management and future real-time safety management systems.

Based on the gaps identified by the review in the body of knowledge and on a broader analysis of technology diffusion, the paper highlights the research challenges to be overcome in the advent of digital skin. The paper recommends that researchers follow a coherent process for smart technology design, development and implementation in order to achieve this vision for the construction industry.