Jun Yao, Ruochen Ding, Kailun Li, Baorui Du, Lu Zhao and Yixiang Yuan
The purpose of this paper is to identify the energy absorption characteristics of arch micro-strut (ARCH) lattice structure (different from traditional straight micro-strut…
Abstract
Purpose
The purpose of this paper is to identify the energy absorption characteristics of arch micro-strut (ARCH) lattice structure (different from traditional straight micro-strut lattice structure) under high-speed impact, and promote the development of special-shaped micro-strut lattice structure.
Design/methodology/approach
The study serves to study the anti-impact and energy absorption characteristics of ARCH lattice structure under different strain rates and different unit layers of lattice structure. In this paper, quasi-static compression and Hopkinson compression bar experiments are used for comparative analysis.
Findings
The results show that the ARCH lattice structure has obvious strain rate effect. When the strain rate is low, the number of layers of lattice structure has a great influence on the mechanical properties. With the increase of strain rate, the influence of the number of layers on the mechanical properties gradually weakens. So the ARCH lattice structure with fewer layers (less than five layers) should be selected as the impact energy absorbing materials at lower impact rate, while at higher impact rate, the number of layers can be selected according to the actual requirements of components or devices space size.
Originality/value
This study shows that Arch lattice structure has excellent energy absorption performance, and provides a theoretical reference for the application of ARCH lattice structure in energy-absorbing materials. ARCH lattice structure is expected to be applied to a variety of energy absorption and anti-impact components or devices, such as aircraft black box fall buffer components, impact resistant layer of bulletproof and landing buffer device.
Details
Keywords
This paper proposes that if a political system is more like to facilitate a unified government, to establish a strong executive body and to respond to the needs of the majority…
Abstract
This paper proposes that if a political system is more like to facilitate a unified government, to establish a strong executive body and to respond to the needs of the majority, financial reforms are more likely to emerge from the policymaking process and produce positive results. On the contrary, political systems that discourage those governing features are less likely to produce reforms. This chapter compares financial reform processes in China, Taiwan and New Zealand. All of them performed low level of financial reforms in the early 1980s but resulted in different situations later. In the mid-2000s, New Zealand heralded the most efficient and stable financial system; while Taiwan lagged behind and China performed the worst. Evidence showed that China’s authoritarian system may be the most superior in forming a unified government with a strong executive, but the policy priority often responds more to the interests of a small group of power elites; therefore the result of financial reform can be limited. Taiwan’s presidential system can produce greater financial reform when the ruling party controls both executive and legislative bodies, but legislative obstructions may occur under a divided government. New Zealand's Westminster system produces the most effective and efficient financial reform due to its unified government and a strong executive branch with consistent and stable supports from the New Zealand Parliament.
Details
Keywords
At airport security checkpoints, baggage screening is aimed to prevent transportation of prohibited and potentially dangerous items. Observing the projection images generated by…
Abstract
Purpose
At airport security checkpoints, baggage screening is aimed to prevent transportation of prohibited and potentially dangerous items. Observing the projection images generated by X-rays scanner is a critical method. However, when multiple objects are stacked on top of each other, distinguishing objects only by a two-dimensional picture is difficult, which prompts the demand for more precise imaging technology to be investigated for use. Reconstructing from 2D X-ray images to 3D-computed tomography (CT) volumes is a reliable solution.
Design/methodology/approach
To more accurately distinguish the specific contour shape of items when stacked, multi-information fusion network (MFCT-GAN) based on generative adversarial network (GAN) and U-like network (U-NET) is proposed to reconstruct from two biplanar orthogonal X-ray projections into 3D CT volumes. The authors use three modules to enhance the reconstruction qualitative and quantitative effects, compared with the original network. The skip connection modification (SCM) and multi-channels residual dense block (MRDB) enable the network to extract more feature information and learn deeper with high efficiency; the introduction of subjective loss enables the network to focus on the structural similarity (SSIM) of images during training.
Findings
On account of the fusion of multiple information, MFCT-GAN can significantly improve the value of quantitative indexes and distinguish contour explicitly between different targets. In particular, SCM enables features more reasonable and accurate when expanded into three dimensions. The appliance of MRDB can alleviate problem of slow optimization during the late training period, as well as reduce the computational cost. The introduction of subjective loss guides network to retain more high-frequency information, which makes the rendered CT volumes clearer in details.
Originality/value
The authors' proposed MFCT-GAN is able to restore the 3D shapes of different objects greatly based on biplanar projections. This is helpful in security check places, where X-ray images of stacked objects need to be distinguished from the presence of prohibited objects. The authors adopt three new modules, SCM, MRDB and subjective loss, as well as analyze the role the modules play in 3D reconstruction. Results show a significant improvement on the reconstruction both in objective and subjective effects.
Details
Keywords
This paper aims to understand the implication of night soil selling at the public toilets for the shared interests between colonial state and business in nineteenth-century Hong…
Abstract
Purpose
This paper aims to understand the implication of night soil selling at the public toilets for the shared interests between colonial state and business in nineteenth-century Hong Kong. More specifically, this paper attempts to look at the ways the toilets were sustained by the sharing interests over night soil profits between state and business sector.
Design/methodology/approach
It is argued from the political economy perspective that the night soil profit determined the public toilet development.
Findings
The successful emergence of the modern state of colonies was generally attributed to colonial modernization, a force that was widely recognized for having introduced hygienic modernity. It was easily assumed that the public toilets would be provided by colonial government. Instead, sanitary problems during the early colonization of this colony were addressed by the privately-owned public pail toilets provided by big Chinese landowners through the selling of night soil. Based on this quasi-commercial mode, these toilets, which served as night soil collection points, were certainly inefficient; they however survived for half a century into the early twentieth century.
Originality/value
The paper challenges the long-established assumptions of binary relations and hierarchical public roles that put them into zero-sum competition of capacity. It rather argues that the interests aligned with each other.
Details
Keywords
Jiaxin Huang, Wenbo Li, Xiu Cheng and Ke Cui
This study aims to identify the key factors that influence household pro-environmental behaviors (HPEBs) and explore the differences caused by the same influencing factors between…
Abstract
Purpose
This study aims to identify the key factors that influence household pro-environmental behaviors (HPEBs) and explore the differences caused by the same influencing factors between household waste management behavior (HWM) and household energy-saving behavior (HES).
Design/methodology/approach
A meta-analysis was conducted on 90 articles about HPEBs published between 2009 and 2023 to find the key factors. HPEBs were further categorized into HWM and HES to investigate the difference influenced by the above factors on two behaviors. The correlation coefficient was used as the unified effect size, and the random-effect model was adopted to conduct both main effect and moderating effect tests.
Findings
The results showed that attitude, subjective norms, and perceived behavioral control all positively influenced intention and HPEBs, but their effects were stronger on intention than on HPEBs. Intention was found to be the strongest predictor of HPEBs. Subjective norms were found to have a more positive effect on HES compared to HWM, while habits had a more positive effect on HWM. Furthermore, household size was negatively correlated with HWM but positively correlated with HES.
Originality/value
The same variables have different influences on HWM and HES. These results can help develop targeted incentives to increase the adoption of HPEBs, ultimately reducing household energy consumption and greenhouse gas emissions and contributing to the mitigation of global warming.