Search results

With the rapid increase in the number of installed wind turbines (WTs) worldwide, requirements and expenses of maintenance have also increased significantly. The condition monitoring (CM) of WT provides a strong “soft guarantee” for preventive maintenance. The supervisory control and data acquisition (SCADA) system records a huge amount of condition data, which has become an effective means of CM. The main objective of the present study is to summarize the application of SCADA data to fault detection in wind turbines, analyze its advantages and disadvantages and predict the potential of future investigations on the use of SCADA data for fault detection.

The authors first review the means of WT CM and summarize the characteristics of CM based on SCADA data. To ensure the quality of SCADA data, data preprocessing methods are analyzed and compared. Then, the failure modes of the key components are discussed and the SCADA data used for fault detection of each component are compared. Moreover, the fault detection methods for WT are classified and a general framework for fault detection is proposed. Finally, the issues in the WT fault detection method based on SCADA data are reviewed.

Based on the performed analyses, it is found that although the fault detection accuracy based on SCADA data is relatively poor, it has low capital expenses and low computational cost. More specifically, when there is scarce fault data, the normal SCADA data can be used to detect the fault time. However, the specific fault type cannot be identified in this way. When a large amount of fault data are accumulated in the SCADA system, it can not only detect the occurrence time of the fault but also identify the specific fault type.

The main contribution of the present study is to summarize the pre-processing methods for SCADA data, the data required for fault detection of key components and the characteristics of the fault detection model. Then we propose a general fault detection framework for wind turbines based on SCADA data, where the maintenance workers can choose the appropriate fault detection method according to different fault detection requirements and data resources. This article is expected to provide guidance for fault detection based on time-series sensor signals and be of interest to researchers, maintenance workers and managers.

This work aims to address source and dynamics of institutional change. It seeks to develop analytic tools by adaptation of Schumpeterian notion on entrepreneurship, Nelson's work on basic institutions and specific institutions, and Nonaka's middle‐up‐down framework of knowledge management in contrast to top‐down process. Pragmatically it attempts to understand how to improve policy capacity that challenges China seriously.

The work adopts a detailed case study method. A paired case is chosen with the criteria that they have widespread impact in China, and are representative of general and specific institutional change, respectively. Data came from mixed sources: field work and publications. Comparison of the paired cases identifies similarities and differences of different institutional change.

Similarities in the cases are in the important role of institutional entrepreneurs, crucial necessity of field experimentation, and regulatory and legislative means of knowledge processing. Differences are that centralized “top‐down” process of knowledge development, together with committed and centrally guided field experimentation, characterizes general institutional change. In contrast, coordinated and distributed “middle‐up‐down” process, together with autonomously emerged creation at the grassroots, characterizes specific institutional change.

This is a new research area. Many more empirical and theoretical works are needed.

As to how China should improve policy capacity, the study indicates: to focus policy learning on specific parts and facets of institutional settings; to change policy‐makers' role from omni‐competent controller to catalyst/promoter of institutional change; to assign an active role to middle levels and allow broader participation and diverse experimentations.

The author explores interesting details of institutional entrepreneurship and institutional changes based on the two case studies. This work fills the gap of how to analyze institutional change from the innovation/innovation systems perspective.

The purpose of this paper is to improve the mechanical and thermal properties of photosensitive resin for rapid prototyping (RP) by modifying with nano‐TiO₂.

The silane coupling agent was selected to treat the surface of anatase nano‐TiO₂ particles. The IR spectrum showed that the hydroxyl (−OH) group on the surface of nano‐TiO₂ reacted with the coupling agent effectively. The effects of TiO₂ content on the curing depth and viscosity of the photosensitive resin were studied by experiments. The mechanical properties including tensile strength, tensile modulus, flexural strength and hardness were tested according to ASTM standards. The thermal stability of modified photosensitive resin was tested by differential scanning calorimetry.

The comprehensive performance of the modified photosensitive resin was good when TiO₂ content was at 0.25 per cent, the tensile strength was increased by 89 per cent from 25.26  to 47.82 MPa, the tensile modulus increased by 18 per cent from 2,001  to 2,362 MPa, the flexural strength and the hardness increased by 6 and 5 per cent, respectively. In addition, the plasticity and heat stability of modified photosensitive resin were also improved obviously.

The paper provides a low‐cost method to greatly improve the performance of photosensitive resin for RP. The modified photosensitive resin prepared according to the formulas in this paper has been successfully employed in RP equipment of Xi'an Jiaotong University, China.

This paper aims to investigate the effect of Cu content and T6 heat treatment on the mechanical properties and the tribological performance of SiCp/Al-Si-Cu-Ni-Mg hybrid composites at an elevated temperature.

The stir casting method was used to synthesize SiCp/Al-12Si-xCu-1Ni-1Mg (x = 2, 3, 3.5, 4, 4.5, 5 Wt.%) composites containing 20 vol% SiC. The hardness and tensile strength of the aluminum matrix composites (AMCs) at room temperature and elevated temperature were studied, and the wear mechanism was investigated using scanning electron microscopic and energy dispersive spectroscopy.

Results indicate that the hardness and tensile strength of the AMCs are affected significantly by T6 heat treatment and Cu content. The high-temperature friction and wear mechanism of AMCs is the composite wear mechanism of oxidation wear, adhesion wear, abrasive wear, peeling wear, high-temperature softening and partial melting. Among them, adhesion wear, high-temperature matrix softening and local melting are the main wear mechanisms.

The influence mechanism of Cu content on the hardness, tensile strength and high temperature resistance of AMCs was explained by microstructure. And the results further help to explore the application of AMCs in high temperature.

Being interested in developing a natural preservative for the prolongation of shrimp shelf life, this study aims to evaluate the Sargassum horneri extracts for their antioxidant effect, copper reducing power, copper chelating activity and polyphenol oxidase (PPO) inhibitory activity, as well as explored their potential preservative activity in white leg shrimp.

The antioxidant properties of Sargassum horneri 75% ethanol aqueous extracts were measured by 2,2-diphenyl-1-picryl hydrazyl (DPPH), 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), ferric reducing antioxidant power (FRAP) and PPO inhibitory activity. Sample III displayed the highest antioxidant activity, PPO inhibitory activity, copper reducing power and copper chelating activity, so it was selected for further studying its impact on shrimp's quality changes such as pH value, total volatile basic nitrogen (TVB-N), thiobarbituric acid reactive substances (TBARS), melanosis and sensory score during storage at 4°C.

Among all three samples, sample III containing 49.88% total phenolic contents was selected for the further study on the prevention of quality loss and melanosis of shrimp, because it yielded the highest antioxidant activity, PPO inhibitory activity, copper reducing power and copper chelating activity than the other two samples (samples II and IV). It was found that shrimp treated with 0.2% sample III had the lowest melanosis scores throughout the storage (p < 0.05). During ten days of storage at 4°C, shrimp treated with 0.2% sample III had a higher score in sensory properties (color, segments, texture and odor), compared with the control, 0.1% kojic acid and 0.1% sample III treated shrimp (p < 0.05). The results indicated that the treatment of shrimp with 0.2% sample III could extend the shelf life to eight days at 4°C.

The extracts of Sargassum horneri displayed potent PPO inhibition, antimicrobial and antioxidant properties. Importantly, the 75% extracts of Sargassum horneri could extend the shelf life. Considering these results, the extracts of Sargassum horneri may be used as natural preservatives in the food industry after further evaluation of their other properties such as toxicity, as well as provide a choice target to source natural products intended for cosmetics.

The originality of this paper lies in the development and application of the extracts of edible algae. To extend the shelf life of seafood, the polyphenolic-rich extract of Sargassum horneri provided another possible selection.

This study explores configurations that promote the development of collective economies in China's rural villages and reveals the multiple development pathways that otherwise remain relatively unexamined in the literature.

The authors obtained first-hand representative case data from 20 villages in 12 counties in 5 provinces in East, West and Central China via fieldwork and applied fuzzy set qualitative comparative analysis (fsQCA) to conduct a configurational comparative study of the development of village collective economies.

This paper identifies five factors in the current literature that affect the development of village collectives, based on an “entrepreneur–situation” analytical framework. Using the fsQCA method, this study further obtains two main configurations of conditions that culminate in the growth of rural collective economies in China. The first solution is the “top-down path”: When entrepreneurial leadership (EL), resource endowment (RE) and government assistance (GA) are present, a village collective economy will experience a high level of development, irrespective of policy support (PS) and villagers' participation (VP). The second solution is the “bottom-up path”: When EL, VP and PS are present and GA is not present, a village collective economy will experience a high level of development, irrespective of RE. In both situations, EL stands out as the core condition for the development of village collective economies, implying the need for the government to vigorously cultivate the entrepreneurial skills and aspirations of village cadres.

Taking a configurational perspective and using an fsQCA approach, this research constructs an “entrepreneur–situation” analytical framework to investigate the key combinations of factors and pathways involved in the high level of development of Chinese village collective economies.

This article was based on the information from The 5th International Conference of Institutes and Libraries for Chinese Overseas Studies held in the University of British Columbia in Vancouver, BC, Canada in which the author was a presenter in session 4.2.9a of the Early life of Yuan Shikai and the formation of Yuan family. The paper aims to include comprehensive analysis and development of the history of Chinese migration. An annotated bibliography of suggested readings was offered to highlight the subject knowledge for further research in this area.

The paper includes comprehensive analysis and development of the history of Chinese migration and the experiences and family histories of overseas Chinese in Canada. An annotated bibliography of suggested readings was offered to highlight the subject knowledge for further research in this area.

The paper offers full description and comprehensive analysis of the history of Chinese migration and overseas Chinese studies in Canada. A bbibliography of suggested readings was offered for further research in this area.

This research study has a strong subject focus on Chinese migration, overseas Chinese studies, and resource-sharing in the subject area. It is a specific field for research in Asian studies.

The result of this study will assist students, researchers, and the general public in the area of overseas Chinese studies and developing their interests in the social and historical value of Chinese migration history and resource-sharing in the area.

Very little research has been done in the area of Chinese migration and historical development. The paper would offer historians, sociologists, ethnologists, librarians, administrations, professors, as well as students in the fields of Asian history, anthropology, sociology, political science, geography, and other Asian-related interdisciplinary studies.

This paper outlines the rapid rise of China's fintech companies over the past decade with a focus on their globalization strategies as they enter their next phase of development.

The author examines China's current and prospective influence on global financial digitization trends, and assesses both domestic and foreign opportunities and challenges confronted by China's fintech firms as they look to expand abroad.

The Chinese government is experimenting with a radically new fintech system and a regulatory regime in response to it. Chinese ambitions to expand fintech influence through private companies and the state-led “digital RMB” (e-CNY) will likely provoke a wave of “digital protectionism” among developed nations to protect internal digital payments.

This paper is an original economic history research on China's fintech industry.

This paper aims to explore blockchain integration strategies within a three-level livestock meat supply chain in which consumers have a preference for quality trust in livestock meat products. The paper investigates three questions: First, how does consumers’ preference for quality trust affect blockchain integration and transaction decisions among supply chain participants? Second, under what circumstances will retailers choose to participate in the blockchain? Finally, how can other factors such as blockchain costs and supplier–retailer partnership value affect integration decisions?

This paper formulates a supply chain network equilibrium model and employs the logarithmic-quadratic proximal prediction-correction method to obtain equilibrium decisions. Extensive numerical studies are conducted using a pork supply chain network to analyze the implications of blockchain integration for different supply chain participants.

The results reveal several key insights: First, suppliers’ increased blockchain integration, driven by higher quality trust preference, can negatively affect their profits, particularly, with excessive trust preferences and high blockchain costs. Second, an increase in consumers’ preference for quality trust expands the range of unit operating costs for retailers engaging in blockchain. Finally, the supplier–retailer partnership drives retailer blockchain participation, facilitating enhanced information sharing to benefit the entire supply chain.

This study provides original insights into blockchain integration strategies in an agricultural supply chain through the application of the supply chain network equilibrium model. The investigation of several key factors on equilibrium decisions provides important managerial implications for different supply chain participants to address consumers’ preference for quality trust and enhance overall supply chain performance.