Search results

The purpose of this study is to prepare a chemically stable superhydrophobic coating with remarkable mechanical properties and concrete protective properties.

One synthetic step was adopted to prepare superhydrophobic coating. The process and product were analyzed and confirmed by fourier transform-infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), water contact angle (WCA), transmission electron microscopy (TEM), scanning electron microscope (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The mechanical properties were confirmed by tensile test. The concrete protective properties were confirmed by solution immersion test and rapid chloride migration coefficient test.

MSiO₂ nanoparticles (NPs) were chosen to enhance the hydrophobicity of fluorosilicone coatings. With a 4:1 mass ratio of fluorosilicone resin and MSiO₂ NPs, the coatings show superhydrophobicity with a WCA of 156° and a SA of 3.1°. In addition, the tensile mechanical property was improved, and the chloride ion diffusion coefficient was decreased significantly after the addition of MSiO₂ NPs.

This new fluorosilicone coating hybrid by MSiO₂ NPs could be applied as a concrete protective layer with properties of self-cleaning, antifouling, etc.

Introduction of MSiO₂ NPs hybrid to prepare fluorosilicone coating with superhydrophobicity on concrete surface has not been systematically studied previously.

The objective of this study is to explore the impact of a government-supported initiative for operational security, specifically the establishment of the national security emergency industry demonstration base, on the profitability of local publicly traded companies. Additionally, the study investigates the significance of firms' blockchain strategies and technologies within this framework.

Using the differences-in-differences (DID) approach, this study evaluates the impact of China's national security emergency industry demonstration bases (2015–2022) on the profitability of local firms. Data from the China Research Data Service (CNRDS) platform and investor Q&As informed our analysis of firms' blockchain strategy and technology, underpinned by detailed data collection and a robust DID model.

Emergency industry demonstration bases have notably boosted enterprise profitability in both return on assets (ROA) and return on equity (ROE). Companies adopting blockchain strategies and operational technology see a clear rise in profitability over non-blockchain peers. Additionally, the technical operation of blockchain presents a more pronounced advantage than at the strategic level.

We introduced a new perspective, emphasizing the enhancement of corporate operational safety and financial performance through the pathway of emergency industry policies, driven by the collaboration between government and businesses. Furthermore, we delved into the potential application value of blockchain strategies and technologies in enhancing operational security and the emergency industry.

This study investigated the effect of individual perceptions of innovation-oriented human resource system (IHRS) on individual innovative work behavior (IWB) and how this effect is realized.

The authors conducted an online questionnaire survey at three time points with 481 employees in three Chinese organizations. Structural equation modeling was used to test the hypothesized relationships among the variables.

Perceived IHRS was found to positively influence IWB, and this effect was sequentially mediated by individual perceptions of innovative culture and intrinsic motivation.

In order to elicit IWB, HR systems should be constructed around the strategic objective of innovation. Moreover, there should be a match between IHRS and innovative culture to trigger intrinsic motivation and ultimately IWB.

This study examines the effect of perceptions of IHRS on individuals' IWBs; Moreover, it integrates organizational culture and individual motivation and finds a chain mediating role of individual perceptions of innovative culture and intrinsic motivation in the relationship between IHRS and IWB.

Traditional multivariable grey prediction models define the background-value coefficients of the dependent and independent variables uniformly, ignoring the differences between their physical properties, which in turn affects the stability and reliability of the model performance.

A novel multivariable grey prediction model is constructed with different background-value coefficients of the dependent and independent variables, and a one-to-one correspondence between the variables and the background-value coefficients to improve the smoothing effect of the background-value coefficients on the sequences. Furthermore, the fractional order accumulating operator is introduced to the new model weaken the randomness of the raw sequence. The particle swarm optimization (PSO) algorithm is used to optimize the background-value coefficients and the order of the model to improve model performance.

The new model structure has good variability and compatibility, which can achieve compatibility with current mainstream grey prediction models. The performance of the new model is compared and analyzed with three typical cases, and the results show that the new model outperforms the other two similar grey prediction models.

This study has positive implications for enriching the method system of multivariable grey prediction model.

Smog seriously affects the ecological environment and poses a threat to public health. Therefore, smog control has become a key task in China, which requires reliable prediction.

This paper establishes a novel time-lag GM(1,N) model based on interval grey number sequences. Firstly, calculating kernel and degree of greyness of the interval grey number sequence respectively. Then, establishing the time-lag GM(1,N) model of kernel and degree of greyness sequences respectively to obtain their values after determining the time-lag parameters of two models. Finally, the upper and lower bounds of interval grey number sequences are obtained by restoring the values of kernel and degree of greyness.

In order to verify the validity and practicability of the model, the monthly concentrations of PM2.5, SO2 and NO2 in Beijing during August 2017 to September 2018 are selected to establish the time-lag GM(1,3) model for kernel and degree of greyness sequences respectively. Compared with three existing models, the proposed model in this paper has better simulation accuracy. Therefore, the novel model is applied to forecast monthly PM2.5 concentration for October to December 2018 in Beijing and provides a reference basis for the government to formulate smog control policies.

The proposed model can simulate and forecast system characteristic data with the time-lag effect more accurately, which shows that the time-lag GM(1,N) model proposed in this paper is practical and effective.

Based on interval grey number sequences, the traditional GM(1,N) model neglects the time-lag effect of driving terms, hence this paper introduces the time-lag parameters into driving terms of the traditional GM(1,N) model and proposes a novel time-lag GM(1,N) model.

The purpose of this paper is to study the properties of derived grey verhulst prediction model with multiplication transformation and reduce its modeling complexity.

The paper discussed the parameter characteristics of grey derived verhulst model under multiple transformation, and demonstrated its effect on its simulative value and predictive value by investigating the multiple transformation acting on the raw data sequence of this grey model. The parameter characteristics of this model under multiple transformations and its effect of the simulation value and forecasting value are analyzed by studying the properties of multiply transformation of this model.

The research finding shows that the modeling accuracy of derived grey verhulst model is in no relation to multiple transformations.

The above results imply that the data level can be reduced; the process of building derived grey verhulst model can be simplified; but the simulative and predictive accuracy of this model remain unchanged.

The paper succeeds in realising the properties of derived grey verhulst model by using the method of multiplication transformation, which is helpful to understand the modeling mechanism and expand the application range of derived grey verhulst model.

The purpose of this paper is to unify the expression of fractional grey accumulating generation operator and the reducing generation operator, and build the FDGM(1,1) model with the unified fractional grey generation operator.

By systematically studying the properties of the fractional accumulating operator and the reducing operator, and analyzing the sensitivity of the order value, a unified expression of the fractional operators is given. The FDGM(1,1) model with the unified fractional grey generation operator is established. The relationship between the order value and the modeling error distribution is studied.

The expression of the fractional accumulating generation operator and the reducing generation operator can be unified to a simple expression. For −1<r < 1, the fractional grey generation operator satisfies the principle of new information priority. The DGM(1,1) model is a special case of the FDGM(1,1) model with r = 1.

The sensitivity of the unified operator is verified through random numerical simulation method, and the theoretical proof was not yet possible.

The FDGM(1,1) model has a higher modeling accuracy and modeling adaptability than the DGM(1,1) by optimizing the order.

The expression of the fractional accumulating generation operator and the reducing generation operator is firstly unified. The FDGM(1,1) model with the unified fractional grey generation operator is firstly established. The unification of the fractional accumulating operator and the reducing operator improved the theoretical basis of grey generation operator.

Metaheuristic algorithms based on biology, evolutionary theory and physical principles, have been widely developed for complex global optimization. This paper aims to present a new hybrid optimization algorithm that combines the characteristics of biogeography-based optimization (BBO), invasive weed optimization (IWO) and genetic algorithms (GAs).

The significant difference between the new algorithm and original optimizers is a periodic selection scheme for offspring. The selection criterion is a function of cyclic discharge and the fitness of populations. It differs from traditional optimization methods where the elite always gains advantages. With this method, fitter populations may still be rejected, while poorer ones might be likely retained. The selection scheme is applied to help escape from local optima and maintain solution diversity.

The efficiency of the proposed method is tested on 13 high-dimensional, nonlinear benchmark functions and a homogenous slope stability problem. The results of the benchmark function show that the new method performs well in terms of accuracy and solution diversity. The algorithm converges with a magnitude of 10-4, compared to 102 in BBO and 10-2 in IWO. In the slope stability problem, the safety factor acquired by the analogy of slope erosion (ASE) is closer to the recommended value.

This paper introduces a periodic selection strategy and constructs a hybrid optimizer, which enhances the global exploration capacity of metaheuristic algorithms.

In a dual-robot system, the relative position error is a superposition of errors from each mono-robot, resulting in deteriorated coordination accuracy. This study aims to enhance relative accuracy of the dual-robot system through direct compensation of relative errors. To achieve this, a novel calibration-driven transfer learning method is proposed for relative error prediction in dual-robot systems.

A novel local product of exponential (POE) model with minimal parameters is proposed for error modeling. And a two-step method is presented to identify both geometric and nongeometric parameters for the mono-robots. Using the identified parameters, two calibrated models are established and combined as one dual-robot model, generating error data between the nominal and calibrated models’ outputs. Subsequently, the calibration-driven transfer, involving pretraining a neural network with sufficient generated error data and fine-tuning with a small measured data set, is introduced, enabling knowledge transfer and thereby obtaining a high-precision relative error predictor.

Experimental validation is conducted, and the results demonstrate that the proposed method has reduced the maximum and average relative errors by 45.1% and 30.6% compared with the calibrated model, yielding the values of 0.594 mm and 0.255 mm, respectively.

First, the proposed calibration-driven transfer method innovatively adopts the calibrated model as a data generator to address the issue of real data scarcity. It achieves high-accuracy relative error prediction with only a small measured data set, significantly enhancing error compensation efficiency. Second, the proposed local POE model achieves model minimality without the need for complex redundant parameter partitioning operations, ensuring stability and robustness in parameter identification.

This paper aims to improve the meshing effect of the gear teeth. It is recommended to analyze the deformation difference between the inner and outer surfaces of the flexspline. The purpose of this paper is to modify the profile of the flexspline based on the deformation difference to improve the transmission accuracy and operating life of the harmonic drive.

In this paper, ring theory is used to calculate the deformation difference of the inner and outer surfaces of the flexspline, and the actual tooth profile of the flexspline is corrected based on the deformation difference. Then, the flexspline is divided into multiple sections along the axial direction, so that the three-dimensional tooth profile of the flexspline is modified to improve the gear tooth meshing effect.

This paper proves the effect of the deformation difference between the inner and outer surfaces of the flexspline on the tooth backlash, which affects the transmission accuracy and life of the harmonic drive. It is recommended to modify the tooth profile of the flexspline based on the deformation difference, so as to ensure the tooth meshing effect.

This paper provides a new way for the optimization of the three-dimensional tooth profile design of the harmonic drive.