Search results

The purpose of this paper is to propose a variable impedance control method of finger exoskeleton for hand rehabilitation using the contact forces between the finger and the exoskeleton, making the output trajectory of finger exoskeleton comply with the natural flexion-extension (NFE) trajectory accurately and adaptively.

This paper presents a variable impedance control method based on fuzzy neural network (FNN). The impedance control system sets the contact forces and joint angles collected by sensors as input. Then it uses the offline-trained FNN system to acquire the impedance parameters in real time, thus realizing tracking the NFE trajectory. K-means clustering method is applied to construct FNN, which can obtain the number of fuzzy rules automatically.

The results of simulations and experiments both show that the finger exoskeleton has an accurate output trajectory and an adaptive performance on three subjects with different physiological parameters. The variable impedance control system can drive the finger exoskeleton to comply with the NFE trajectory accurately and adaptively using the continuously changing contact forces.

The finger is regarded as a part of the control system to get the contact forces between finger and exoskeleton, and the impedance parameters can be updated in real time to make the output trajectory comply with the NFE trajectory accurately and adaptively during the rehabilitation.

Existing robot-assisted minimally invasive surgery (RMIS) system lacks of force feedback, and it cannot provide the surgeon with interaction forces between the surgical instruments and patient’s tissues. This paper aims to restore force sensation for the RMIS system and evaluate effect of force sensing in a master-slave manner.

This paper presents a four-DOF surgical instrument with modular joints and six-axis force sensing capability and proposes an incremental position mode master–slave control strategy based on separated position and orientation to reflect motion of the end of master manipulator to the end of surgical instrument. Ex-vivo experiments including tissue palpation and blunt dissection are conducted to verify the effect of force sensing for the surgical instrument. An experiment of trajectory tracking is carried out to test precision of the control strategy.

Results of trajectory tracking experiment show that this control strategy can precisely reflect the hand motion of the operator, and the results of the ex-vivo experiments including tissue palpation and blunt dissection illustrate that this surgical instrument can measure the six-axis interaction forces successfully for the RMIS.

This paper addresses the important role of force sensing and force feedback in RMIS, clarifies the feasibility to apply this instrument prototype in RMIS for force sensing and provides technical support of force feedback for further clinical application.

The purpose of this paper is to design a flying wheel-legged humanoid robot (FWLR), endowing the robot with flight capability to improve the obstacle-crossing ability of the wheel-legged humanoid robot. A flight control method using thrust-vector-control (TVC) under constant thrust strength is proposed, which reduces the performance requirements on the response speed of thrusters.

To endow the robot with flight capability, three sets of thrusters are installed at the robot’s back and two arm ends to provide flight lift and the direction of thrust can be changed through the arm swing. According to the robot configuration, this paper established a linearized dynamic model and proposed a constant-strength-thrust-vector-control (CSTVC) framework enabling the robot to achieve flight without thrust intensity change.

With the proposed modeling method and CSTVC framework, FWLR can inhibit attitude and position drift during takeoff and hovering, and has certain adaptability to takeoff attitude. Finally, FWLR reached a flying height up to 1 m under a 30 kg large self-weight with fixed thrust strength.

The design, modeling and flight control method proposed in this paper enables a human-sized wheel-legged humanoid robot to achieve takeoff and hovering for the first time. The movement range of wheel-legged humanoid robot is extended to the air, thereby enhancing its application value in emergency tasks such as disaster search-and-rescue.

This study aims to design a novel 3 degree-of-freedom parallel-driven hydraulic wrist (PHW) joint, characterized by a compact structure, heavy payload capacity and spherical workspace.

In this paper, the kinematics and dynamics mathematical model of PHW is analyzed based on the closed-loop vector method, screw theory and virtual work principle. And the key parameters of PHW are determined based on the singularity analysis. The integrated design method of hydraulic and mechanical systems is used, thereby enabling a hose-less configuration that fosters a low-leakage hydraulic system structure with reduced self-weight. Additionally, this research proposed a dynamic nonlinear compensation control methodology predicated on a payload model to enhance the stability and precision of trajectory tracking for PHW. Finally, several experiments have been conducted to evaluate and validate the performance of the proposed approach and the payload capacity of PHW.

Experiment results show that PHW has a payload-to-self-weight ratio of 4(payload 14 kg with self-weight 3.5 kg) under supply pressure 7 MPa. The experimental assessment of payload capacity substantiates the efficacy of the dynamic nonlinear compensation control method for PHW. Remarkably, the trajectory tracking errors for PHW remain under 0.03 rad, even when subjected to payloads of 10.5 and 14 kg.

This study presents an effective parallel hydraulic-driven wrist structure. This parallel structure provides a spherical workspace with flexible motion, and larger payload capacity compared with the existing robot wrist.

This paper aims to investigate the problem of vision based autonomous laparoscope control, which can serve as the primary function for semi-autonomous minimally invasive surgical robot system. Providing the surgical gesture recognition information is a fundamental key component for enabling intelligent context-aware assistance in autonomous laparoscope control task. While significant advances have been made in recent years, how to effectively carry out the efficient integration of surgical gesture recognition and autonomous laparoscope control algorithms for robotic assisted minimally invasive surgical robot system is still an open and challenging topic.

The authors demonstrate a novel surgeon in-loop semi-autonomous robotic-assisted minimally invasive surgery framework by integrating the surgical gesture recognition and autonomous laparoscope control tasks. Specifically, they explore using a transformer-based deep convolutional neural network to effectively recognize the current surgical gesture. Next, they propose an autonomous laparoscope control model to provide optimal field of view which is in line with surgeon intra-operation preferences.

The effectiveness of this surgical gesture recognition methodology is demonstrated on the public JIGSAWS and Cholec80 data sets, outperforming the comparable state-of-the-art methods. Furthermore, the authors have validated the effectiveness of the proposed semi-autonomous framework on the developed HUAQUE surgical robot platforms.

This study demonstrates the feasibility to perform cognitive assistant human–robot shared control for semi-autonomous robotic-assisted minimally invasive surgery, contributing to the reference for further surgical intelligence in computer-assisted intervention systems.

The accuracy and reliability of upper limb motion assessment have received great attention in the field of rehabilitation. Grasping test is widely carried out for motion assessment, which requires patients to grasp objects and move them to target place. The traditional assessments test the upper limb motion ability by therapists, which mainly relies on experience and lacks quantitative indicators. This paper aims to propose a deep learning method based on the vision system of our upper limb rehabilitation robot to recognize the motion trajectory of rehabilitation target objects automatically and quantitatively assess the upper limb motion in the grasping test.

To begin with, an SRF network is designed to recognize rehabilitation target objects grasped in assessment tests. Moreover, the upper limb motion trajectory is calculated through the motion of objects’ central positions. After that, a GAE network is designed to analyze the motion trajectory which reflects the motion of upper limb. Finally, based on the upper limb rehabilitation exoskeleton platform, the upper limb motion assessment tests are carried out to show the accuracy of both object recognition of SRF network and motion assessment of GAE network. The results including object recognition, trajectory calculation and deviation assessment are given with details.

The performance of the proposed networks is validated by experiments that are developed on the upper limb rehabilitation robot. It is implemented by recognizing rehabilitation target objects, calculating the motion trajectory and grading the upper limb motion performance. It illustrates that the networks, including both object recognition and trajectory evaluation, can grade the upper limb motion functionn accurately, where the accuracy is above 95.0% in different grasping tests.

A novel assessment method of upper limb motion is proposed and verified. According to the experimental results, the accuracy can be remarkably enhanced, and the stability of the results can be improved, which provide more quantitative indicators for further application of upper limb motion assessment.

The grasping task of robots in dense cluttered scenes from a single-view has not been solved perfectly, and there is still a problem of low grasping success rate. This study aims to propose an end-to-end grasp generation method to solve this problem.

A new grasp representation method is proposed, which cleverly uses the normal vector of the table surface to derive the grasp baseline vectors, and maps the grasps to the pointed points (PP), so that there is no need to add orthogonal constraints between vectors when using a neural network to predict rotation matrixes of grasps.

Experimental results show that the proposed method is beneficial to the training of the neural network, and the model trained on synthetic data set can also have high grasping success rate and completion rate in real-world tasks.

The main contribution of this paper is that the authors propose a new grasp representation method, which maps the 6-DoF grasps to a PP and an angle related to the tabletop normal vector, thereby eliminating the need to add orthogonal constraints between vectors when directly predicting grasps using neural networks. The proposed method can generate hundreds of grasps covering the whole surface in about 0.3 s. The experimental results show that the proposed method has obvious superiority compared with other methods.

One of the development trends of robots is to enable robots to have the ability of anthropomorphic manipulation. Grasping is the first step of manipulation. For mobile manipulator robots, grasping a target during the movement process is extremely challenging, which requires the robots to make rapid motion planning for arms under uncertain dynamic disturbances. However, there are many situations require robots to grasp a target quickly while they move, such as emergency rescue. The purpose of this paper is to propose a method for target dynamic grasping during the movement of a robot.

An off-line learning from demonstrations method is applied to learn a basic reach model for arm and a motion model for fingers. An on-line dynamic adjustment method of arm speed for active and passive grasping mode is designed.

The experimental results of the robot movement on flat, slope and speed bumps ground show that the proposed method can effectively solve the problem of fast planning under uncertain disturbances caused by robot movement. The method performs well in the task of target dynamic grasping during the robot movement.

The main contribution of this paper is to propose a method to solve the problem of rapid motion planning of the robot arm under uncertain disturbances while the robot is grasping a target in the process of robot movement. The proposed method significantly improves the grasping efficiency of the robot in emergency situations. Experimental results show that the proposed method can effectively solve the problem.

This study aims to represent a novel closed-form solutions method based on the product of the exponential model to solve the inverse kinematics of a robotic manipulator. In addition, this method is applied to master–slave control of the minimally invasive surgical (MIS) robot.

For MIS robotic inverse kinematics, the closed-form solutions based on the product of the exponential model of manipulators are divided into the RRR and RRT subproblems. Geometric and algebraic constraints are used as preconditions to solve two subproblems. In addition, several important coordinate systems are established on the surgical robot and master–slave mapping strategies are illustrated in detail. Finally, the MIS robot can realize master–slave control by combining closed-form solutions and master–slave mapping strategy.

The simulation of the instrument manipulator based on the RRR and RRT subproblems is executed to verify the correctness of the proposed closed-form solutions. The fact that the accuracy of the closed-form solutions is better than that of the compensation method is validated by the contrastive linear trajectory experiment, and the average and the maximum tracking errors are 0.1388 mm and 0.3047 mm, respectively. In the animal experiment, the average and maximum tracking error of the left instrument manipulator are 0.2192 mm and 0.4987 mm, whereas the average and maximum tracking error of the right instrument manipulator are 0.1885 mm and 0.6933 mm. The successful completion of the animal experiment comprehensively demonstrated the feasibility and reliability of the master–slave control strategy based on the novel closed-form solutions.

The proposed closed-form solutions are error-free in theory. The master–slave control strategy is not affected by calculation error when the closed-form solutions are used in the surgical robot. And the accuracy and reliability of the master–slave control strategy are greatly improved.

The purpose of this paper is to propose a control algorithm to improve the backdrivability performance of minimally invasive surgical robotic arms, so that precise manual manipulations of robotic arms can be performed in the preoperative operation.

First, the flexible-joint dynamic model of the 3-degree of freedom remote center motion (RCM) mechanisms of minimally invasive surgery (MIS) robot is derived and its dynamic parameters and friction parameters are identified. Next, the angular velocities and angular accelerations of joints are estimated in real time by the designed Kalman filter. Finally, a control algorithm based on Kalman filter is proposed to enhance the backdrivability of RCM mechanisms by compensating for the internally generated gravitational, frictional and inertial resistances experienced during the positioning and orientating.

The parameter identification for RCM mechanisms can be experimentally evaluated from comparison between the measured torques and the reconstructed torques. The accuracy and convergence of the real-time estimation of angular velocity and acceleration of the joint by the designed Kalman filter can be verified from corresponding simulation experiments. Manual adjustment experiments and animal experiments validate the effectiveness of the proposed backdrivability control algorithm.

The backdrivability control algorithm presented in this paper is a universal method to enhance the manual operation performance of robots, which can be used not only in the medical robot preoperative manual manipulation but also in robot haptic interaction, industrial robot direct teaching and active rehabilitation training of rehabilitation robot and so on.

Compared with other backdrivability design methods, the proposed algorithm achieves good backdrivability for RCM mechanisms without using force sensors and accelerometers. In addition, this paper presents a new static friction compensation approach for a joint moving with very low velocity.