Search results

The purpose of this study was to investigate occupational and non-occupational mortality among Mexican immigrants in the South Eastern United States. The construction industry has the highest burden of occupational fatalities in the USA of all industries, and foreign-born Hispanic workers are disproportionately affected.

Data were obtained from 3,093 death certificates maintained by the Consulate General of Mexico in Atlanta, Georgia. Standardized mortality ratios (SMR) were used to compare occupational-related deaths among construction industry occupations, and logistic regression models were used to examine the relationship between manners of death not related to occupation and employment in the construction industry.

The proportion of Mexican immigrants who died from occupational injuries is higher among all construction workers (SMR = 1.31), roofers (SMR = 2.32) and carpenters (SMR = 2.25) than other workers. Among the population in this analysis suicide [adjusted odds ratio (aOR) = 0.63] and death from natural causes (aOR = 0.70) were inversely related to work in the construction industry.

Interventions to reduce occupational fatalities among Mexican migrant construction workers should target roofers and carpenters. Future research should further investigate the industry’s association with suicide and natural death.

This is one of the first analyzes that investigated associations between construction industry employment and non-occupational fatalities among immigrants. The analysis provides evidence that a large portion of the Mexican immigrant population is used in the construction industry (38%) and face elevated risks for occupational fatalities and the results of this investigation should encourage greater surveillance of occupational illness and injury among foreign-born immigrants who work in construction, as well as other high-risk industries.

Destination management organizations deliver travel-related information through visitor guides to build destination awareness and attract potential tourists. Therefore, this research aims to investigate how people read such a guide, understand their attitudes and to provide recommendations on enhancing its design.

This research used eye-tracking technology in tandem with surveys and in-depth interviews. Eye-tracking technology uncovered the elements of a visitor guide that attracted particular attention, whereas surveys and interviews provided deeper insights into people’s attitudes toward them.

People do not spend attention equally on each page of a visitor guide. Instead, they look at the reference points (i.e. photo credits, photos, headings and bolded words) and then read the adjacent areas if the information triggers their interest. The characteristics of the attractive components of a visitor guide were discussed and suggestions on designing a more appealing guide were provided.

The triangulated approach not only generated objective and insightful results but also enhanced research validity. This exploratory sequential mixed method can usefully be applied to test other stimuli and assess attention.

To be deemed appealing, a visitor guide should avoid ads unrelated to the destination, include more photos, use the list format and bolded words, add stories or selected comments from social media and provide well-designed maps.

This research fills a gap in the literature by using a triangulated approach including eye-tracking, survey and interviews to examine a 68-page visitor guide. The concept of reference-point reading behavior is proposed. Practical implications are discussed to improve the design of a visitor guide.

This study aims to investigate the effects of hotel customers’ perceived utilitarian and hedonic values on their intention to use service robots. In addition, the influences of innovativeness, ease of use and compatibility on hotel customers’ perceived utilitarian and hedonic values were examined.

The data of the current study was collected from 11 countries including the USA, UK, Turkey, Spain, Romania, Japan, Israel, India, Greece, Canada and Brazil. A structural equation modeling was used to test the study hypotheses.

The results indicated that hotel customers’ intention to use service robots was positively influenced by their utilitarian and hedonic value perceptions. In addition, customers’ perceptions of robots’ ease of use and compatibility had a positive impact on their perceived utilitarian and hedonic values.

The findings of the current study provide unique contributions in the context of hospitality robotics technology adoption literature. In addition, this study provides valuable insights and novel opportunities for hospitality decision-makers to capitalize on, as they strive to strategize the integration of robot-based services into their operations.

本研究调查了酒店顾客感知功能性价值和享乐性价值对服务机器人使用意向的影响。此外, 本研究考察了创新性、易用性和兼容性对酒店顾客感知功能性价值和享乐性价值的影响。

本研究的数据来自美国、英国、土耳其、西班牙、罗马尼亚、日本、以色列、印度、希腊、加拿大和巴西等十一个国家, 采用结构方程模型（SEM）对研究假设进行测试。

结果表明, 酒店顾客使用服务机器人的意向受到他们对功能性价值和享乐性价值的感知的积极影响。此外, 机器人易用性和兼容性对功能性价值和享乐性价值有积极影响。

本研究的发现对酒店行业机器人技术应用文献提供了独特的贡献。此外, 本研究为酒店业的决策者提供了宝贵的见解和新机遇, 使他们能够在将机器人服务的优势整合到酒店运营中。

With the increasing requirements for intelligence in the field of aviation manufacturing, manual assembly can hardly adapt to the trend of future production. The purpose of this study is to realize the semi-automatic assembly of the movable airfoil by proposing a human-robot collaborative assembly strategy based on adaptive admittance control.

A logical judgment system for operating intentions is introduced in terms of different situations of the movements; hence, a human cognition-based adaptive admittance control method is developed to curb the damage of inertia; then virtual limit walls are raised on the periphery of the control model to ensure safety; finally, simulated and experimental comparisons with other admittance control methods are conducted to validate the proposed method.

The proposed method can save at least 28.8% of the time in the stopping phase which effectively compensates for inertia during the assembly process and has high robustness concerning data disturbances.

Due to the human-robot collaboration to achieve compliant assembly of movable airfoils can preserve human subjectivity while overcoming the physical limits of humans, which is of great significance to the investigation of intelligent aircraft assembly, the proposed method that reflects the user's naturalness and intuitiveness can not only enhance the stability and the flexibility of the manipulation, but also contribute to applications of industrial robots in the field of human-robot collaboration.

The paper aims to propose a model and a comprehensive diagnostic method of organizational health status based on traditional Chinese medicine (TCM).

The methodology is qualitative/interpretive and uses of the concept of functional homomorphism of WR Ashby is used, establishing similarities between the way in which this ancient medicine considers the human being and their condition as healthy to transfer it to an organization that produces goods and/or services.

A healthy organization is conceived as one constituted by an association of people regulated by a set of norms based on certain purposes in a state of harmonious balance of their physical and energetic dimensions. In that the physical refers to storage functions, regulation and allocation of resources; transformation of raw materials and inputs into goods and services; waste disposal, distribution and coordination and with information systems for management control, while energy is associated with the ability to act with its management and policies.

The current paper is a first theoretical proposal, which should be enriched with practical applications that feedback its conceptual formulation, thus contributing to its validation.

A comprehensive organizational diagnostic method is made available.

The proposed method allows a comprehensive organizational diagnosis, considering the participation of all the actors that make up this type of social systems.

Although the methodological resource is old, the way it is used here is considered original, and it is also part of an original investigative process by the authors, oriented toward the search for comprehensive organizational diagnostic methods.

Because of the compact structure, short flexspline (FS) harmonic drive (HD) is increasingly used. The stress calculation of FS is very important in design and optimization of HD system. This paper aims to study the stress calculation methods for short FS, based on mechanics analysis and finite element method (FEM).

A rapid stress calculation method, based on mechanics analysis, is proposed for the short FS of HD. To verify the stress calculation precision of short FS, a complete finite element model of HD is established. The results of stress and deformation of short FS in different lengths are solved by FEM.

Through the rapid calculation method, the analytical relationship between circumferential stress and length of cylinder was obtained. And the circumferential stress has proportional relation with the reciprocal of squared length. The FEM results verified that the rapid stress calculation method could obtain accurate results.

The rapid mechanics analysis method is practiced to evaluate the strength of FS at the design stage of HD. And the complete model of HD could contribute to improving the accuracy of FEM results.

The rapid calculation method is developed based on mechanics analysis method of cylinder and equivalent additional bending moment model, through which the analytical relationship between circumferential stress and length of cylinder was obtained. The complete three-dimensional finite element model of HD takes the stiffness of bearing into consideration, which can be used in the numerical simulation in the future work to improve the accuracy.

During the 3D printing process, the model needs to add a support structure to ensure structural stability. Excessive support structure reduces printing efficiency and results in material cost. A flexible support platform for 3 D printing has been designed. It can form an external support structure to replace the original support structure. This paper aims to study the influence of a model’s build orientation on properties when the model is printed on the platform, aiming to provide users with suitable solutions.

A fitness function for estimating the support structure with a support length is constructed. The particle swarm optimization (PSO) algorithm is modified and applied to find the build orientation that minimizes the support structure. However, when the model is printed on the platform, the build orientation of the minimum support structure enhances the complexity of the working path, resulting in an increase of printing time, which needs to be avoided. This paper applies a multi-objective particle swarm optimization (MOPSO) algorithm to minimize the support structure while minimizing printing time. The Pareto solution is obtained by the algorithm.

It is found that the model that has the cantilever structure can reduce more support structure after optimization on the platform, when there is surface quality requirement. When there is no limit, the modified algorithm can minimize the support structure of each model. Considering support structure and printing time, the MOPSO algorithm can easily get optimization results to guide the practical work.

This paper optimizes the model’s build orientation on the flexible support platform by PSO, thereby reducing material cost and improving work efficiency.

Contractors of different scales, operating in different construction industries of varying institutional and economic settings, have different considerations when making bid or no-bid and mark-up decisions. Focusing on the large and medium-sized contractors in the Jilin province, China, the purpose of this study is to examine important factors affecting their decision to bid (d2b) and mark-up decisions and investigate differences between large and medium-sized contractors in evaluating the importance of the various factors affecting their d2b and mark-up decisions.

This study used a survey design for timely data collection from a large population. Contractors’ bidding attitudes was collected using an online survey questionnaire with a list of 40 key factors. Statistical analytical methods were applied for comparing the two groups of contractors.

The results of this study indicate that factors related to client conditions are most critical for both large and medium-sized contractors in their d2b and mark-up decisions. The results also show statistically significant differences between the two groups of contractors on a subset of factors affecting their d2b and mark-up decisions. The large contractors have placed more emphasis on projects' potential financial and strategic benefits. Another notable finding is that both groups of contractors have placed great emphasise on “government legislations” in their d2b and mark-up decisions.

These findings should be interpreted in consideration of several limitations. Firstly, the sample size is relatively small, and the focus was on a single province in the China construction industry. Next, this study only explores differences between large and medium-sized contractors in evaluating the importance of the various factors affecting their d2b and mark-up decisions.

Contractors could refer list of critical factors in competing for jobs in Jilin province or other provinces of similar institutional and economic settings. Construction clients, on the other hand, should consider the list of critical factors in the formulation of their competitive tendering procedures, thus enhancing the efficiency in their procurement of construction services.

Research on contractors’ bidding decision-making in the context of Chinese construction industry remains scarce; the research findings have implications for the industry stakeholders.

To discover the key elements of the use of the mechanism of public–private partnership for sustainable development, which are studied using the game approach.

Employed methods were as follows: trends method, regression analysis method, and game situation analysis method.

We discovered the key elements of the use of the mechanism of public–private partnership for sustainable development and determined the trends of the dependence of the sustainable development level on the mechanism of a public–private partnership at the level of countries that are leaders in this form of interaction (Denmark, Netherlands, Singapore, China, Switzerland and Finland). We reveal a positive dependence of the influence with China in 2017–2018 and with Finland in 2020–2021. The characteristics and strategies of implementing public–private partnerships are determined, and the spheres of influence of this form of interaction within the indicator of sustainable development are distinguished. We evaluate the perspectives of sustainable development under the influence of the public–private partnership mechanism. Based on the analysis results, it has been revealed that achievement of direct relation between the improved indicator of implementing the public–private partnership mechanisms and sustainable development could be realised within the orientation towards the effective strategic management of the interaction.

The scientific novelty of this research consists in the development of the theoretical and practical specifics of the use of the public–private partnership mechanism for sustainable development which determined using the game approach.