Search results

The development of reusable space launchers requires a comprehensive knowledge of transonic flow effects on the launcher structure, such as buffet. Indeed, the mechanical integrity of the launcher can be compromised by shock wave/boundary layer interactions, that induce lateral forces responsible for plunging and pitching moments.

This paper aims to report numerical and experimental investigations on the aerodynamic and aeroelastic behavior of a diamond airfoil, designed for microsatellite-dedicated launchers, with a particular interest for the fluid/structure interaction during buffeting. Experimental investigations based on Schlieren visualizations are conducted in a transonic wind tunnel and are then compared with numerical predictions based on unsteady Reynolds averaged Navier–Stokes and large eddy simulation (LES) approaches. The effect of buffeting on the structure is finally studied by solving the equation of the dynamics.

Buffeting is both experimentally and numerically revealed. Experiments highlight 3D oscillations of the shock wave in the manner of a wind-flapping flag. LES computations identify a lambda-shaped shock wave foot width oscillations, which noticeably impact aerodynamic loads. At last, the experiments highlight the chaotic behavior of the shock wave as it shifts from an oscillatory periodic to an erratic 3D flapping state. Fluid structure computations show that the aerodynamic response of the airfoil tends to damp the structural vibrations and to mitigate the effect of buffeting.

While buffeting has been extensively studied for classical supercritical profiles, this study focuses on diamond airfoils. Moreover, a fluid structure computation has been conducted to point out the effect of buffeting.

The transonic buffet is a complex aerodynamics phenomenon that imposes severe constraints on the design of high-speed vehicles, including for aircraft and space launchers. The origin of buffet is still debated in the literature, and the control of this phenomenon remains difficult. This paper aims to propose an original scenario to explain the origin of buffet, which in turn opens promising perspectives for its alleviation and attenuation.

This work relies on the use of numerical simulations, with the idea to reproduce the buffet phenomenon in a transonic aileron designed for small space launchers. Two numerical approaches are tested: unsteady Reynolds averaged Navier–Stokes (URANS) and large-eddy simulation (LES). The numerical predictions are first validated against available experimental data, before to be analysed in detail to identify the origin of buffet on the studied configuration. A complementary numerical study is then conducted to assess the possibility to delay the onset of buffet.

The buffet control strategy is based on wall cooling. By adequately choosing the wall temperature, this work shows that it is feasible to delay the emergence of buffet. More precisely, this paper highlights the crucial role of the subsonic flow inside the boundary layer, showing the existence of upstream travelling pressure waves that are responsible for the flow coupling between both sides of the airfoil, at the origin of the buffet phenomenon.

This paper proposes a new scenario to explain the origin of buffet, based on the use of a Fanno and Rayleigh flow analogies. This approach is used to design a control solution based on a modification of the wall temperature, showing very promising results.

This study aims to investigate the morphing concepts able to manipulate the dynamics of the downstream unsteadiness in the separated shear layers and, in the wake, be able to modify the upstream shock–boundary layer interaction (SBLI) around an A320 morphing prototype to control these instabilities, with emphasis to the attenuation or even suppression of the transonic buffet. The modification of the aerodynamic performances according to a large parametric study carried out at Reynolds number of 4.5 × 10⁶, Mach number of 0.78 and various angles of attack in the range of (0, 2.4)° according to two morphing concepts (travelling waves and trailing edge vibration) are discussed, and the final benefits in aerodynamic performance increase are evaluated.

This article examines through high fidelity (Hi-Fi) numerical simulation the effects of the trailing edge (TE) actuation and of travelling waves along a specific area of the suction side starting from practically the most downstream position of the shock wave motion according to the buffet and extending up to nearly the TE. The present paper studies through spectral analysis the coherent structures development in the near wake and the comparison of the aerodynamic forces to the non-actuated case. Thus, the physical mechanisms of the morphing leading to the increase of the lift-to-drag ratio and the drag and noise sources reduction are identified.

This study investigates the influence of shear-layer and near-wake vortices on the SBLI around an A320 aerofoil and attenuation of the related instabilities thanks to novel morphing: travelling waves generated along the suction side and trailing-edge vibration. A drag reduction of 14% and a lift-to-drag increase in the order of 8% are obtained. The morphing has shown a lift increase in the range of (1.8, 2.5)% for angle of attack of 1.8° and 2.4°, where a significant lift increase of 7.7% is obtained for the angle of incidence of 0° with a drag reduction of 3.66% yielding an aerodynamic efficiency of 11.8%.

This paper presents results of morphing A320 aerofoil, with a chord of 70cm and subjected to two actuation kinds, original in the state of the art at M = 0.78 and Re = 4.5 million. These Hi-Fi simulations are rather rare; a majority of existing ones concern smaller dimensions. This study showed for the first time a modified buffet mode, displaying periodic high-lift “plateaus” interspersed by shorter lift-decrease intervals. Through trailing-edge vibration, this pattern is modified towards a sinusoidal-like buffet, with a considerable amplitude decrease. Lock-in of buffet frequency to the actuation is obtained, leading to this amplitude reduction and a drastic aerodynamic performance increase.

The overall goal of science is to build a valid and reliable body of knowledge about the functioning of the world and how applying that knowledge can change it. As personnel and human resources management researchers, we aim to contribute to the respective bodies of knowledge to provide both employers and employees with a workable foundation to help with those problems they are confronted with. However, what research on research has consistently demonstrated is that the scientific endeavor possesses existential issues including a substantial lack of (a) solid theory, (b) replicability, (c) reproducibility, (d) proper and generalizable samples, (e) sufficient quality control (i.e., peer review), (f) robust and trustworthy statistical results, (g) availability of research, and (h) sufficient practical implications. In this chapter, we first sing a song of sorrow regarding the current state of the social sciences in general and personnel and human resources management specifically. Then, we investigate potential grievances that might have led to it (i.e., questionable research practices, misplaced incentives), only to end with a verse of hope by outlining an avenue for betterment (i.e., open science and policy changes at multiple levels).