Search results

This paper aims to investigate the tribological behavior and online infrared spectra of three types of lubricating oils containing dinonyl diphenylamine (DNDA) antioxidant, which are mineral oil (MO), poly alpha olefin (PAO) and trimethylolpropane trioleate (TMPTO), during the friction process at high temperature (temperature rising at first and isothermal holding afterwards).

A platform of low speed four-ball tribometer equipped with a temperature controller combined with infrared spectrometer was established. MO, PAO and TMPTO base oils were mixed with 1.0 Wt.% DNDA antioxidant, coded as MO_a, PAO_a and TMPTO_a in sequence. The friction coefficient and online infrared spectra of the oils were tested during the friction process of temperature rising at first and isothermal holding afterwards, and the wear tracks of the upper balls were measured using a confocal scanning optical microscope.

The results indicated that the DNDA antioxidant was depleted to reduce the generation of alcohols and carbonyl products, and the depletion rate of DNDA followed the sequence of MO_a > PAO_a > TMPTO_a. In the temperature rising friction process, the critical transition of friction coefficient was confirmed. The addition of DNDA antioxidant reduced the temperature of the oils at the critical transition of friction coefficient, and the temperature followed the sequence of TMPTO_a > PAO_a > MO_a. After the critical transition, the friction coefficient was first increased and then declined to a steady value; the friction coefficient of MO_a increased and declined first, followed by PAO_a and TMPTO_a. In the steady stage of friction, there was no obvious effect of DNDA on the friction coefficient of the oils. Moreover, DNDA enhanced the wear properties of MO_a and PAO_a; no obvious improvement was revealed for the wear property of TMPTO_a.

The established platform of low speed four-ball tribometer combined with infrared spectrometer successfully realized online testing of the structure changes of lubricating oil during high temperature friction, which can give some reference on the oxidation and friction researches of lubricating oil.

This paper aims to focus the synchronous chemical conversion technology–based titanium/zirconium composite on 6061, 7075 aluminum alloys and galvanized steel.

The effects of pH, temperature, reaction time and other process parameters on the corrosion resistance of the three metal surface coatings were investigated by copper sulfate drop and electrochemical corrosion performance tests under a certain content of H2TiF6 and H2ZrF6. The surface morphology and element distribution of the conversion coating were analyzed by scanning electron microscope and X-ray photoelectron spectroscopy.

The results show that the optimal synchronization chemical conversion conditions of 6061/7075 aluminum alloys/galvanized steel are controlled as follows: H2TiF6 2.2 mL/L, H2ZrF6 1 mL/L, pH 3.9, conversion temperature 35°C and conversion time 120 s.

Multi-metals chemical conversion coating can be obtained simultaneously with uniform corrosion resistance and surface morphology. The presence of microdomain features in multiple metals facilitates simultaneous chemical conversion into coatings.

Eddy currents are inevitable in magnetic resonance imaging (MRI) systems. These currents are mainly induced by gradient fields. This study aims to propose a fast analytical method to calculate eddy currents induced by frequently switching gradient fields in a traditional C-shape MRI system.

Fourier decomposition and magnetic vector potentials were used to calculate the eddy currents. Calculations with the proposed analytical method revealed the spatial distribution and temporal evolution of eddy currents.

Calculation and Maxwell simulation results were consistent. The agreement between calculation and simulation results indicates that increasingly sophisticated structures could be developed. The calculated results could guide the design of improved gradient coils.

Eddy currents induced by gradient current are decomposed into currents induced by each time-harmonic component, and then adding them together to obtain complete contribution of the eddy current. The analytical method was used to characterize the properties of symmetric and asymmetric eddy currents induced by gradient coils in MRI systems. The analytical method can be used to improve the gradient shield during the design of the gradient coil in the MRI system.