Search results

As the number of social media users continues to rise globally, a heated debate emerges on whether social media use improves or harms mental health, as well as the bidirectional relation between social media use and mental health. Motivated by this, the authors’ study adopts the stressor–strain–outcome model and social compensation hypothesis to disentangle the effect mechanism between social media use and psychological well-being. The purpose of this paper is to address this issue.

To empirically validate the proposed research model, a large-scale two-year longitudinal questionnaire survey on social media use was administered to a valid sample of 6,093 respondents recruited from a university in China. Structural equation modeling was employed for data analysis.

A longitudinal analysis reveals that social media use positively (negatively) impacts psychological well-being through the mediator of nomophobia (perceived social support) in a short period. However, social media use triggers more psychological unease, as well as more life satisfaction from a longitudinal perspective.

This study addresses the bidirectional relation between social media use and psychological unease. The current study also draws both theoretical and practical implications by unmasking the bright–dark duality of social media use on psychological well-being.

The purpose of this paper is to develop a novel method for analyzing wheel-rail (W-R) contact using thermo-mechanical measurements and study the effects of heating on the characteristics of W-R contact under different creepages.

This study developed an implicit-explicit finite element (FE) model which could solve both partial slip and full sliding problems by setting different angular velocities on the wheels. Based on the model, four material types under six different creepages were simulated.

The results showed that frictional heating significantly affected the residual stress distribution under large creepage conditions. As creepage increased, the temperature of the wheel tread and rail head rose and the peak value was located at the trailing edge of the contact patch.

The proposed FE model could reduce computational time and thus cost to about one-third of the amount commonly found in previous literature. Compared to other studies, these results are in good agreement and offer a reasonable alternative method for analyzing W-R contact under various conditions.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-07-2019-0298

This paper aims to provide a new drilling entry board for printed circuit board (PCB) process, superior in heat dissipation, lubrication, water solubility and hole location accuracy, achieving an excellent drilling process.

Using a mixture of polyethylene glycol (PEG) and water-soluble adhesives as hydrosoluble, endothermic and lubricant resins and aluminum foils as baseplates, a series of coated and aluminous entry boards (CABs) for PCB drilling was successfully prepared. The surface appearance of the entry boards was observed clearly by scanning electron microscopy (SEM). The endothermic and lubricant effects of the resins applied on the CABs was characterized by differential scanning calorimetry (DSC) and their water solubility was tested in the normal-temperature water (25°C). Moreover, the CABs’ good drilling properties were tested when they were used for PCB drilling.

The SEM analysis showed that the surfaces of the resin layers coated on the CABs whose coating thicknesses were less than 80 μm were smoother and flatter, which could improve hole location accuracy and reduce drill breakage ratio. By virtue of DSC, the endothermic and lubricant effects of the CABs were proven. The fusion of PEG in the resin layers could absorb the heat produced by drilling, restrain the temperature of the drill bit and hole rising and lubricate the drill bit efficiently when a hole was being drilled, which could achieve high-quality holes with good production efficiency. The water-soluble test showed that the prepared CABs had excellent water solubility at normal temperature, enabling the resin left on the hole walls and in the flute of the drill bit to be washed away easily and thereby improving the drilling efficiency and quality. The drilling tests showed that the increase in the thickness of the CABs’ coating could improve the hole location accuracy and alleviate the bit wear. In addition, the suitable coating thickness could ensure the firm adhering of the resin coating the aluminum foil, effectively avoid drill intertwist and prevent the resin debris from blocking the drilled holes on the surface of the entry board, which could hinder chip removal, resulting in poor hole wall quality and drill breakage.

This paper has a remarkably high industrial practicality in the PCB manufacture process.

The purpose of this paper is to attempt to solve a decision‐making problem for breeding target character showed as an interval number.

A new comprehensive evaluation method was proposed based on similarity‐difference theory and interval number theory. The data from Winter Wheat Group I Variety Regional Test in Henan Province in 2009‐2010 were analysed using the proposed method.

The results showed that Zhou 99233 was a good variety, Yuxhan No.7, An 05‐28, Xun K8, Jinyumai 378 and Zhoumai 18 were better ones, 08 luo 36, and Xuke 718 ordinary ones, and others worse ones. Based on this, the feasibility of the method was discussed. It showed that the proposed method had some obvious merits, such as arithmetic was simple, operation convenient, flexible and practical, fast and effective, etc.

Application to a living example indicated that its evaluation effect was satisfactory. Consequently, the application prospect of the method will be very vast.

The paper succeeds in solving a decision‐making problem for breeding target character shown as an interval number.

The paper seeks to attempt to solve a decision‐making problem for breeding target character shown as an interval number.

A new comprehensive evaluation method is proposed based on similarity‐difference theory and interval number theory. Data from Winter Wheat Group I Variety Regional Test in Henan Province in 2009‐2010 were analysed using the proposed method.

The results showed that Zhou 99233 was a good variety; Yuxhan No. 7, An 05‐28, Xun K8, Jinyumai 378 and Zhoumai 18 were better ones; 08 luo 36,and Xuke 718 ordinary ones, and others worse ones. Based on this, the feasibility of the method was discussed. It showed that the proposed method had some obvious merits, such as simple arithmetic, convenient operation, flexible and practical, fast and effective.

The application of a live example indicated that its evaluation effect was satisfactory.

The paper succeeds in solving a decision‐making problem for breeding target character shown as an interval number.

This paper aims to present the main factors affecting the mechanical drilling of the printed circuit board (PCB for short) micro-holes and method of micro-ultrasonic powder molding (micro-UPM for short) by utilizing PCB micro-hole array.

To optimize the drilling process, the paper proposes the on-line monitoring methods for the drilling process including drilling force, drilling temperature, high-speed photography and vibration signals. Taking 0.10 and 0.15 mm micro-drilling as examples, the paper analyzes the drilling process of ultra-small micro-holes. Finally, by taking the PCBs with 0.10 and 0.15 mm micro-hole arrays as the micro-cavity inserts, utilizing ultra-high-molecule weight polyethylene powder with the average particle size of about 150 μm as raw material, two sizes of micro-cylinder array polymer parts are fabricated through micro-UPM process.

PCB micro-cavity inserts with micro-hole arrays fabricated by mechanical drilling has the advantages of low costs, high efficiency and good consistency. Taking 0.10 and 0.15 mm micro-drilling as examples, it is found that the both measured apertures are about 10.0 μm more than the diameter of the micro-drill bits on average. The average diameter of the micro-cylinders by micro-UPM process is smaller than that of the micro-hole with the same specification, while the value of the roughness of the cylinder surface is more than that of the hole-wall surface with the same specification.

This paper describes the challenges and the developments of mechanical drilling and by using PCB micro-cavity inserts with micro-hole arrays fabricated by mechanical drilling, two different micro-cylinder array polymer parts are successfully made and thus the application area of PCB micro-drilling is broadened.

The purpose of this study is to develop optimal evacuation plan to provide valuable theoretical and practical insight in the fire evacuation work of similar structures, by proposing a systematic simulation-based guided-evacuation agent-based model (GAM) and a three-stage mathematical evacuation model to investigate how to simulate, assess and improve the performance efficiency of the evacuation plan.

The authors first present the self-evacuation and guided-evacuation models to determine the optimal evacuation plan in ship chamber. Three key performance indicators are put forward to quantitatively assess the evacuation performance within the two fire scenarios. The evacuation model in tower is built to obtain the dividing points of the three different fire evacuation plans.

The study shows that the optimal evacuation plan determined by the GAM considering social relationships effectively relieves the congestion or collision of evacuees and improves the evacuation uniformity. The optimal evacuation plan not only solves the crush caused by congestion or collision of evacuees but also can greatly shorten the evacuation time for passenger ship fire.

This study establishes the GAM considering the interactive evacuee characteristics and the proportion of evacuees guided by the crew members to make the optimal evacuation plan more time-efficient. The self-evacuation process is simulated to assess the performance of the guided-evacuation strategies, which are used to verify the effectiveness and feasibility of the optimal evacuation plan in this research.

The overuse and scarcity of resources emphasize the importance of the circular economy. The technology facilitated by Industry 4.0 stimulates the implementation of the circular economy that aims to reduce resource use and enhance operational efficiency. This study focuses on enhancing delivery efficiency in an online-to-offline (O2O) context from an Industry 4.0 technology-facilitated personal configuration perspective, that is, comparing in-house and crowdsourced delivery efficiency in China's O2O on-demand food delivery context.

The authors collect 128,152 orders from 38 restaurants of an online restaurant chain in China. The authors adopt multiple regression analysis to examine the delivery efficiency gap between in-house and crowdsourced deliverymen and the determinants of this efficiency gap.

The findings of this study reveal that crowdsourced deliverymen exhibit higher delivery efficiency, in terms of a shorter delivery time, than in-house deliverymen. In addition, the authors find that platforms providing monetary incentives or implementing late delivery penalties enlarge this efficiency gap. Furthermore, the authors show that external factors, such as working on weekends and bad weather conditions, contribute to the narrowing of this performance efficiency.

The study's findings suggest that platforms should use advanced technologies facilitated by Industry 4.0 to optimize their personnel configuration to enhance their delivery efficiency and reduce carbon emissions. The effective approaches include using financial incentives and improving working schedules.

The authors' findings contribute to the online fulfillment literature by focusing on delivery efficiency in the O2O context from the Industry 4.0 technology-facilitated personnel configuration perspective. The authors examine how internal and external factors moderate the performance efficiency between these two types of deliverymen.

Building on social media and destination brand-related literature, this study aims to explore World Heritage Sites’ (WHSs) brand diffusion and formation process from long-term and short-term perspectives, which includes brand diffusion, user-generated content (UGC), opinion leaders and brand events’ impact.

This study uses a mixed-method including text mining, keyword analysis and social network analysis to explore the brand formation process of four popular WHSs in Beijing, namely, the Palace Museum, Great Wall, Summer Palace and Temple of Heaven and more than 10,000,000 users’ data on Sina Weibo has been implemented to uncover the underlying social media branding mechanism.

The results show that the number of postings keeps in a stable range in most months, but, in general, there are no common rules for changing trends among the four WHSs; long-term high-frequency keywords related to history and culture account for a higher percentage; different kinds of accounts have varying impacts on information diffusion, in which media accounts lead to a bigger influence. However, more followers do not necessarily mean more interactions and most of the interaction ratio is much lower than 0.01000; brand events facilitate brand dissemination and have an impact on the creation of UGC.

This study is valuable for destination marketers to deeper understand brand diffusion and formation and provides valuable insights for developing effective destination marketing strategies.

Unlike previous studies that only concern a few parts of destination brand formation via social media (e.g. brand diffusion, brand events or opinion leaders’ impact), this study takes a more comprehensive perspective by systematically analyzing the brand formation process of WHSs on social media. By considering both long-term diffusion and short-term representative events, this study provides a more holistic understanding of the branding mechanism.

This paper seeks to examine the further integration of machine translation technologies with cross language information access in providing web users the capabilities of accessing information beyond language barriers. Machine translation and cross language information access are related technologies, and yet they have their own unique contributions in handling information in multiple languages. This paper aims to demonstrate that there are many opportunities to further integrate machine translation with cross language information access, and the combination can greatly empower web users in their information access.

Using English and Chinese as the language pair for studying, this paper looks at machine translation in query translation‐based cross language information access at multiple important aspects, which include query translation, relevance feedback, interactive cross language information access, out‐of‐vocabulary term translation, and data fusion. The goal is to obtain more insights about the wide range usages of machine translation in cross language information access, and to help the community to identify promising future directions for both machine translation and cross language access.

Machine translation can be applied effectively in many places in the whole cross language information access process. Queries translated by a machine translation system are high quality and are more robust in handling potential untranslated terms. Translation enhancement, a relevance feedback method using machine translation generated returned documents, is not only a valid technique by itself, but also helps to generate more robust cross language information access performance when combined with other relevance feedback techniques. Machine translation is also found to play a significant role in resolving untranslated terms and in data fusion.

This set of comparative empirical studies on integrating machine translation and cross language information access was performed on a common evaluation framework, and examined integration at multiple points of the cross language access process. The experimental results demonstrate the value of further integrating machine translation in cross language information access, and identify interesting future directions for both machine translation and cross language information access research.