Search results

The purpose of this paper is to investigate the dependence of dark current on threading dislocations (TDs) in relaxed Ge layer for Ge/Si heterojunction photodetectors.

The analysis of the effects of TDs is based on SRH generation and recombination mechanism used in two‐dimensional drift‐diffusion numerical simulation.

It is found that the TDs in Ge layer acting as the recombination centers lead to large dark current densities of devices, and the recombination rate is affected by the impurity out‐diffusion from Si substrate. Besides, the TDs, being the acceptor‐like defects simultaneously, form band barrier at Si/Ge interface with lightly doped Si substrates, thus limiting the minority carrier transport and resulting in low dark current densities.

The simulation results are excellently consistent with the experimental data and indicate that the reduction of threading dislocation densities (TDDs), especially in Ge buffer layer, dramatically decreases dark currents densities of Ge/Si photodetectors. The investigation can be applied to imbue devices with desired characteristics.

This paper aims to clarify the friction properties of 304 steel surface modification. The surface modification includes laser texturing processing and nitriding treatment on 304 steel surface, and then the friction properties’ test was conducted on different friction directions and different upper test samples by using microfriction and wear testing machine.

The diameter and spacing of 100-, 150-, 200-, 300-μm pit array on the surface of 304 steel were calculated using a M-DPSS-50 semiconductor laser device. Then, the textured surface was nitriding-treated using a nitriding salt bath device. The chemical composition, surface morphology and surface microhardness of the composite-modified surface were measured by X-ray diffraction and by using an optical microscope and a microhardness tester. The tribological characteristics of the composite-modified surface were tested by MRTR microcomputer-controlled multifunctional friction and wear testing machine.

The result showed that a rule pit texture surface was obtained by the texture processing. The microhardness of nitriding treatment surface reached 574.27HV0.1, which significantly higher than 222.58HV0.1 of 304 steel. The composite-modified surface has excellent anti-friction and wear resistance properties when the upper specimen was GCr15 steel and ZrO2, respectively. The composite-modified surface has excellent anti-friction and anti-wear properties after long time friction under different angles. However, the friction coefficient and wear morphology of the friction pairs are not affected by the friction angle.

Because of the chosen research approach, the research results may lack generalizability. Therefore, researchers are encouraged to test the proposed propositions further.

The paper conducted a systematic study of the tribological characteristics of 304 steel composite modification surface and provided a good basis for the extensive application of 304 steel.

The study provides a good basis for the extensive application of 304 steel.

This paper fulfils an identified need to study the extensive application of 304 steel.

As quality becomes increasingly prioritized in supply chain management, understanding how supply chain quality risk management (SCQRM) practices impact quality performance (QP) is essential. This study investigates the effects of two SCQRM practices – risk prevention (RP) and proactive product recall (PPR) – on QP, with a particular focus on the mediating role of supply chain quality integration (SCQI).

A structured survey was administered to gather data from 400 Chinese manufacturing firms. Structural equation modeling was employed to evaluate the proposed relationships among SCQRM practices (RP and PPR), SCQI and QP.

The findings reveal that both RP and PPR significantly and positively influence QP. Specifically, in the structural model, RP exerts a positive effect on SCQI, while PPR also positively impacts SCQI. Additionally, SCQI serves as a mediator between RP and QP, as well as between PPR and QP.

This study contributes to the supply chain management literature by elucidating the beneficial effects of RP and PPR on QP and identifying SCQI as a key mediating factor in these relationships. Leveraging information processing theory (IPT), the study provides new theoretical insights into the mechanisms through which SCQRM enhances QP via SCQI.

In innovation networks, firm innovation performance is affected by external tie strength and internal knowledge absorptive capacity. This study aims to empirically examine the path relationship between tie strength, absorptive capacity and firm innovation performance in Chinese manufacturing industries, thus enhance our understanding on the mechanism between innovation network and innovation performance.

The authors have conducted a survey among Chinese manufacturers in four industries (textile and garment, household appliance, IT and electronics and motor vehicle assemblers) that are located in North, East, Central and South China, respectively, with a valid response from 278 manufacturers. Structural equation model is used to analyze the results.

This study demonstrates that in Chinese Manufacturing industry, tie strength is positively related to innovation performance. The authors also find that absorptive capacity has a positive impact on innovation performance and it mediates the relationship between tie strength and innovation performance. Then, the authors analyze the effect of ownership, industry and sub-region, and the results show that in private firms and traditional manufacturers, and the firms located in North and Eastern China, tie strength has no direct effect on innovation outcomes, but it can influence innovation indirectly through absorptive capacity.

This study further supports that in Chinese guanxi culture, strong ties with other innovation partners can improve the firm’s absorptive capacity and thus improve innovation performance. The results also suggest that a firm’s absorptive capacity has a significant mediating effect on the relationship between tie strength and innovation performance.

The purpose of this paper is to define the Internet as a virtual space supported by technologies and presented in the form of socioeconomic relations from the perspective of political economy. The Internet space is a unique virtual commodity different from ordinary commodities and has the following effect characteristics: super replicability, space- and time-transcendence, open-source shareability and reality–virtuality transformation.

Internet space can also be imagined as a piece of virtual land. Internet space can be deemed as a piece of virtual land and its value can be divided into labor value and virtual value. The pricing model of virtual value is mainly determined by the gain and discount rate and this value comes from the transfer and markup of social value. In the context of the Internet Plus era, Internet space has become an essential economic factor that influences human economic activities.

Therefore, it is of practical significance and theoretical value to introduce Internet space as an economic variable into the framework of economic theory. The realistic logic of Internet space is to influence human economic behaviors with the combination of information binding.

The theoretical mechanism is to have an impact on the micro-market price by changing market relations from two-dimensional to three-dimensional. Its path to functioning at the macro level is to influence economic behaviors by changing the expectations of investment and consumption, resulting in new economic trends.

This paper aims to draw on a number of indicators of innovation to evaluate and compare two central regions – Hubei and Hunan – with three leading regions of China – Beijing, Shanghai and Guangdong.

The paper focuses on absorptive capacity at the level of domestic regions of China, using data on R&D expenditures, human resources in higher education and in high-tech industries. The paper uses social network analysis to investigate innovation networks based on patents from the SIPO and USPTO.

Results indicate that, in Hubei and Hunan, R&D expenditures do not translate into as many innovative outputs as in the coastal and Southern regions. Moreover, high-tech industries contribute towards a relatively low proportion of the regional outputs of Hubei and Hunan, where especially the electronics industry is very poorly represented. Findings also suggest that Hubei and Hunan have a relatively limited access to foreign technologies embedded in ties with international partners. By contrast, the more advanced three regions tend to develop collaborative activities across national boundaries to a higher extent than across regional boundaries.

The analysis of China's regional innovation system has implications for research on national innovation systems. Policy-makers can benefit from the comparative analysis of regions.

The study is primarily exploratory, and the findings contribute to the literature and ongoing discussion on data sources and methods for the analysis of regional innovation.

The purpose of this paper is to apply the theory of cultural diplomacy to explore and explain the role and function of the Confucius Institution project and its implications for understanding of China's soft power projection.

This paper first presents the theories of soft power and cultural diplomacy as an analytic framework. It then delineates an interpretative illustration of the CI project as a platform for China's cultural diplomacy. The paper concludes with a discussion of the CI project's implications for understanding of China's soft power projection.

The paper argues that the Confucius Institute project can be understood as a form of cultural diplomacy that is state‐sponsored and university‐piloted, a joint effort to gain China a more sympathetic global reception. As such, the Confucius Institution project involves a complex of soft power techniques. However, it is not entirely representative of soft power capability, because the problems embedded in the project and in the wider society run counter to the Chinese government's efforts to increase the Confucius Institutions’ attractiveness and popularity.

This article sheds light on Chinese universities in the role of “unofficial cultural diplomats.” On this topic, further research may need to explore more fundamental issues that bear far‐reaching significance and impact, i.e. the mechanics of Chinese university involvement in Confucius Institutes. Interesting questions arising from this study may help open up a wider spectrum of research topics for understanding the university‐state relationship, cross‐border higher education, as well as the possibilities and limits of educational globalization. At this stage, this article serves as a start to move scholarship in that direction.