Search results

The purpose of this paper is to develop a coated glass fiber fabric which can be used as the outer shell of firefighters' protective clothing and replace aramid fabric.

The silicone resin with excellent heat resistance was selected as the base solution. Silica nanoparticles, mica powder and ferric oxide were added into the coating solution, which was coated on the glass fiber fabrics. The vertical burning, thermal protective performance (TPP) value, second-degree burn time and water repellency of the coated fabrics were characterized.

Results showed that the dosages of the thickening filler were in the range 4%–6%; the coating solution has good viscosity. The optimal composition of fillers added in the silicone resin is silica nanoparticles 6%, ferric oxide 5% and mica powder 6%. The TPP value of the optimum coated fabric is 413 kW·s/m². The second-degree burn time is 4.98 s, which is obviously higher than that of the original glass fiber fabric (3.49 s) and that of the aramid fabric (3.82 s). The coated fabric has better thermal stability than aramid fabric.

The production cost of this coated glass fiber fabric was much lower than that of the aramid fabric.

A novel approach of modelling of flow in yarn package has been presented which illustrates a comprehensive analysis of flow properties in package dyeing process by coupling the Navier- Stokes equations with Brinkman equations. Navier-Stokes equations are also combined with Darcy’s law to be used as reference. The model allows the user to specify inflow rate, liquor pressures, package geometry (inner radius, outer radius, and height), package permeability, fluid viscosity, and temperature. The results of simulation present the velocity and pressure distribution of the flow through the package (both in the tube and the yarn assembly). The influence of shear stress on flow within the package is also discussed.

The pulsed plasma thruster (PPT) is one sort of promising electric thrusters, but the low efficiency is always a big problem for PPT. Many researches have been working on solving this problem. However, there is still no significant breakthrough. This paper aimed to discuss some methods for improving the PPT's efficiency.

The causes for the low efficiency by analyzing the theoretical models of PPT are discussed, and the influences on PPT's performance investigated in terms of the structural or electrical parameters.

The change of structural or electrical parameters which influence the thrust efficiency significantly are taken into account. In the process of designing PPT, optimized structural and electrical parameters should be chosen to attain a better performance.

This analysis is mainly based on the parallel‐rail PPT.

The result of analysis is adopted, the higher thrust efficiency of PPT is expectable.

By introducing theoretical models and analyzing results of some researcher's experiments, this paper offers a method of designing PPT and attempts to help designer to choose appropriate structural and electrical parameters.

Examines the eleventh published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

With the rapid development of materials informatics and the Semantic Web, the semantic-driven solution has emerged to improve traditional query technology, which is hard to discover implicit knowledge from materials data. However, it is a nontrivial thing for materials scientists to construct a semantic query, and the query results are usually presented in RDF/XML format which is not convenient for users to understand. This paper aims to propose an approach to construct semantic query and visualize the query results for metallic materials domain.

The authors design a query builder to generate SPARQL query statements automatically based on domain ontology and query conditions inputted by users. Moreover, a semantic visualization model is defined based on the materials science tetrahedron to support the visualization of query results in an intuitive, dynamic and interactive way.

Based on the Semantic Web technology, the authors design an automatic semantic query builder to help domain experts write the normative semantic query statements quickly and simply, as well as a prototype (named MatViz) is developed to visually show query results, which could help experts discover implicit knowledge from materials data. Moreover, the experiments demonstrate that the proposed system in this paper can rapidly and effectively return visualized query results over the metallic materials data set.

This paper mainly discusses an approach to support semantic query and visualization of metallic materials data. The implementation of MatViz will be a meaningful work for the research of metal materials data integration.

This study aims to analyze the temperature difference between aluminum-based brake disc (ABD) and cast steel brake disc (CSBD) for rail vehicles in the braking process, which is related to the popularization and use of ABD.

Two friction pairs composed of ABD, CSBD and copper-based powder metallurgy brake pad were studied in this paper. The temperature characteristics of the two friction pairs were compared by 1:1 braking test and simulation calculation.

When the speed is 160–250 km/h and the braking pressure is 18 and 29 kN, the calculated maximum temperature of CSBD is 574°C and 681°C, respectively, which is higher than that of ABD 49°C–148°C and 73°C–217°C. Under the test conditions, the maximum temperature of CSBD is 487°C and 624°C respectively, which is higher than that of ABD 63°C–95°C and 63°C–188°C. The temperature difference between ABD and CSBD increases with the increase of braking pressure and speed. The surface temperature distribution of CSBD is “three-peak,” whereas that of ABD is “single-peak.”

This paper reveals the temperature difference between ABD and CSBD and provides data support for promoting the use of ABD.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-08-2024-70320/

The study aims to pioneer an innovative approach for the evaluation of government portal websites (GPWs) by introducing an eye-tracking-based method. The research meticulously pinpoints and analyses the distinct usability issues and challenges that users encounter while navigating and interacting with GPWs.

This study devises an eye-tracking-based GPW usability evaluation approach, which focuses on the major functions (i.e. government information disclosure, government services and interactive responses) of GPWs. An Entropy Weighted Technique for Order Preference by Similarity to an Ideal Solution (EW-TOPSIS) method is employed to process eye-tracking indicator results for deriving GPW usability results.

The proposed approach is demonstrated to assess the usability of 12 GPWs in pilot smart cities in China, and it is found that most GPWs have lower-than-average usability. GPWs with low usability require more cognitive load that exhibit increased fixation and saccade. The comparisons among the GPW usability results from (1) the eye-tracking experiment, (2) questionnaire surveys and (3) the ready-made performance evaluation report validate the effectiveness of eye-tracking-based GPW usability evaluation.

The work contributes to shifting the GPW usability evaluation approach from a subjective judgment paradigm to an objective paradigm, as well as provides implications for enhancing GPW usability, including improving search function, reducing website complexity and prioritizing user needs.

The study aims to examine the effects of guanxi and harmonious leadership on acquisition performance and the role of sociocultural integration as a mediating mechanism impacting the above links, with a focus on Chinese cross-border acquisitions in The Netherlands.

Data were collected through survey questionnaire with 91 respondents who work in Dutch-acquired companies. Regression analysis was used for exploring the relationship.

The study finds that both guanxi and harmonious leadership are positive to acquisition performance, and sociocultural integration represents a significant mediating mechanism by which guanxi and harmonious leadership can result in improved acquisition performance.

This study contributes to culture research by emphasizing the clarification of specific Chinese cultural values and cultural practices in cross-border acquisitions and examining the role of guanxi and harmonious leadership in acquisition performance. Meanwhile, this study helps to unveil Chinese cross-border acquisitions in The Netherlands by examining the mediating force – sociocultural integration.

With the increasing spread of ontologies in various domains, units have gradually become an essential part of ontologies and units ontologies have been developed to offer a better expression ability for the practical usage. From the perspectives of architecture, comparison and reuse, the purpose of this paper is to provide a comprehensive survey on four mainstream units ontologies: quantity-unit-dimension-type, quantities, units, dimensions and values, ontology of units of measure and units ontology (UO) of the open biomedical ontologies, in order to address well the state of the art and the reuse strategies of the UO.

An architecture of units ontologies is presented, in which the relations between key factors (i.e. units of measure, quantity and dimension) are discussed. The criteria for comparing units ontologies are developed from the perspectives of organizational structure, pattern design and application scenario. Then, the authors compare four typical units ontologies based on the proposed comparison criteria. Furthermore, how to reuse these units ontologies is discussed in materials science domain by utilizing two reuse strategies of partial reference and complete reference.

Units ontologies have attracted high attention in the scientific domain. Based on the comparison of four popular units ontologies, this paper finds that different units ontologies have different design features from the perspectives of basis structure, units conversion and axioms design; a UO is better to be applied to the application areas that satisfy its design features; and many challenges remain to be done in the future research of the UO.

This paper makes an extensive review on units ontologies, by defining the comparison criteria and discussing the reuse strategies in the materials domain. Based on this investigation, guidelines are summarized for the selection and reuse of units ontologies.

Impulse buying has been the focus of attention in the marketing. With the rise of online shopping, online impulse buying phenomenon becomes increasingly serious. Whereas, the impulse buying behavior in an online environment is rarely discussed in relevant literature. The purpose of this paper is to explore the impact of the type of product and time pressure on consumer online impulse buying intention; this is a relatively new issue of marketing academia in China.

In this paper, the experimental methodology was adopted to explore the impact of consumer online impulse buying tendencies, the departure from the type of product and the time pressure.

Results show that low-involvement feeling products stimulate consumer online impulse buying tendencies. Simultaneously, there is an interaction effect between time pressure and product type, which is, under the influence of time pressure, the enhancement of low-involvement feeling products on consumer online impulse buying tendency is more significant.

This study discusses the interaction between time pressure and product type on consumers’ online impulse buying tendency, which has not been studied before. While discussing the impact of product types on consumers’ impulse buying tendency on the internet, this paper considers the impact of time pressure on consumers’ impulsive buying tendency, and applies the term of time pressure, a psychological research term, to the field of marketing research, so as to make the cross-links between disciplines closer.