Search results

The purpose of this paper is to study the effect of the nano tube fillers on the corrosion protection properties of the self-curing epoxy (SEP) coatings.

The self-curing epoxy (SEP) resin was synthesized via a reaction between diisopropoxy-bis ethylacetoacetato titanate and the epoxy resin. Halloysite nanotubes (HNTs) was surface modified by grafting (3-glycidoxypropyl) trimethoxysilane to obtain modified HNTs (mHNTs). The HNTs and mHNTs are used as nano tube fillers for the SEP coating. The thermal stability of the coatings was assessed via thermo-gravimetric analysis. The field-emission scanning electron microscopy (SEM) was conducted to analyze the surfaces and cross sections of the coatings. The anticorrosive efficiencies of the coatings were investigated by electrochemical measurements and a neutral salt spray test.

The results demonstrated that the additions of HNTs and mHNTs have little effect on the thermal degradation temperature of the SEP coating. However, the addition of the nanotubes reduced the corrosion resistance of the SEP coating.

The SEP coating itself showed excellent corrosion resistance without any reinforcement particles and is hence promising for application in the heavy-duty anticorrosion field of heat exchangers.

The purpose of this research is to investigate a new approach with its supporting building information modelling (BIM) + augmented reality (AR) tool to enhance architectural visualisation in building life cycle. Traditional approaches to visualise architectural design concentrate on static pictures or three-dimensional (3D) scale models which cause problems, such as expensive design evolution, lack of stakeholders’ communication and limited reusability. The 3D animated fly-throughs still occur on a computer screen in two-dimensions and seem cold and mechanical, unless done with advanced production software.

The method of this research included case study and interview. It was, first, stated, from the building process perspective, how the BIM + AR for Architectural Visualisation System (BAAVS) was realised by integrating two types of visualisation techniques: BIM and AR, and four stages of building life cycle. Then the paper demonstrated four case studies to validate the BAAVS. Finally, four interviews were made with each case manager and team members to collect feedback on utilising BAAVS technology. Questions were asked in the areas of benefits, drawbacks and technical limitations with respect to BAAVS.

Feedback from the stakeholders involved in the four cases indicated that BAAVS was useful and efficient to visualise architectural design and communicate with each other.

This paper demonstrates BAAVS that integrated BIM and AR into architectural visualisation. The system supports an innovative performance that allows: designers to put virtual building scheme in physical environment; owners to gain an immersive and interactive experience; and property sellers to communicate with customers efficiently.

The purpose of this paper is to set new trends of integrated Building Information Modelling (BIM) for the construction industry. BIM has been accepted by construction to some extent as an innovative approach/technology to improve project performance in the aspects of productivity, efficiency and safety. However, maximisation BIM requires strategic research direction to drive this technology across the full spectrum of the project life cycle.

This paper identifies the new trends for adopting BIM in the aspect of integration within Architecture, Engineering and Construction (AEC) sectors.

Research findings identify three stages where project performance can be improved by using BIM: pre-construction phase, construction phase and the maintenance/operation phase.

BIM must evolve to be fully integrated with other technologies, thereby contributing to project performance in various stages of project life cycle.

The purpose of this paper is to determine (1) the relationship between microstructure and fatigue cracking behavior and (2) effect of rolling on the process of crack initiation and propagation in FeCrAl alloys.

The qualitative and quantitative fracture studies were performed using scanning electron microscopy and the non-contact optical measurement system (IFMG5).

The results show that the formation of facets, rough facets and parallel stripes in the crack initiation and early crack propagation zones are closely related to the sensitivity of crack behavior to the microstructure of the material. Besides, the rolling process has a significant influence on the small crack initiation and propagation behavior. Quantitative analysis demonstrates that the size of the stress intensity factor and plastic zone size in the rough zone is associated with the rolling process.

The findings of this study have the potential to enhance the understanding of the microstructural crack formation mechanisms in FeCrAl alloys and shed light on the impact of rolling on the long-term and ultra-long fatigue behavior of these alloys. This new knowledge is vital for improving manufacturing processes and ensuring the safety and reliability of FeCrAl alloys used in nuclear industry applications.

Unconventional machining processes, particularly ultrasonic vibration cutting (UVC), can overcome such technical bottlenecks. However, the precise mechanism through which UVC affects the in-service functional performance of advanced aerospace materials remains obscure. This limits their industrial application and requires a deeper understanding.

The surface integrity and in-service functional performance of advanced aerospace materials are important guarantees for safety and stability in the aerospace industry. For advanced aerospace materials, which are difficult-to-machine, conventional machining processes cannot meet the requirements of high in-service functional performance owing to rapid tool wear, low processing efficiency and high cutting forces and temperatures in the cutting area during machining.

To address this literature gap, this study is focused on the quantitative evaluation of the in-service functional performance (fatigue performance, wear resistance and corrosion resistance) of advanced aerospace materials. First, the characteristics and usage background of advanced aerospace materials are elaborated in detail. Second, the improved effect of UVC on in-service functional performance is summarized. We have also explored the unique advantages of UVC during the processing of advanced aerospace materials. Finally, in response to some of the limitations of UVC, future development directions are proposed, including improvements in ultrasound systems, upgrades in ultrasound processing objects and theoretical breakthroughs in in-service functional performance.

This study provides insights into the optimization of machining processes to improve the in-service functional performance of advanced aviation materials, particularly the use of UVC and its unique process advantages.

The purpose of this paper is to summarize the current applications of BIM, the integration of related technologies and the tendencies and challenges systematically.

Using quantitative and qualitative bibliometric statistical methods, the current mode of interaction between BIM and other related technologies is summarized.

This paper identified 24 different BIM applications in the life cycle. From two perspectives, the implementation status of BIM applications and integrated technologies are respectively studied. The future industry development framework is drawn comprehensively. We summarized the challenges of BIM applications from the perspectives of management, technology and promotion, and confirmed that most of the challenges come from the two driving factors of promotion and management.

The technical challenges reviewed in this paper are from the collected literature we have extracted, which is only a part of the practical challenges and not comprehensive enough.

We summarized the current mode of interactive use of BIM and sorted out the challenges faced by BIM applications to provide reference for the risks and challenges faced by the future industry.

There is little literature to integrate BIM applications and to establish BIM related challenges and risk frameworks. In this paper, we provide a review of the current implementation level of BIM and the risks and challenges of stakeholders through three aspects of management, technology and promotion.

The purpose of this paper is to model the paths of risks associated with building information modeling (BIM) adoption in the Chinese architecture, engineering and construction industry.

A total of 16 risks were identified from the literature review and grouped into nine categories. The data were collected through a questionnaire survey with 95 professionals in China. The partial least square structural equation modeling was used to analyze the data.

The results suggested the risk categorization was confirmed, and that 15 hypothetical risk paths were statistically significant, which formed 13 chains of risk paths. “Inadequate relevant knowledge and expertise” was the primary root risk category of all the 13 chains of risk paths. Additionally, “technological issues,” “poor information sharing and collaboration,” and “liability for data input” had direct effect on the “cost overrun with BIM,” while all the other risks indirectly influence cost via these three risk categories.

Most of the respondents were designers because few clients and contractors have adopted BIM. In addition, the impact and likelihood of risks were accessed by respondents’ judgment based on their experience, which is a common problem of risk management research. As this study focuses on the Chinese architecture, engineering and construction industry, there would be geographical limitation on the findings.

This study provides practitioners with a clear understanding of the risks associated with BIM adoption and enables practitioners to take measures to mitigate the root risks and assure the potential benefits of BIM.

Although there have been studies on the risks associated with BIM adoption, most of them lacked empirical evidence and failed to examine the interactions between risks. This study is different from these prior studies, because it focuses on the interrelationships between risks and identifies the risk paths and root risks using the empirical data. Therefore, this study expands the literature relating to both BIM and risk management. Also, this study enables practitioners to take measures to mitigate the root risks and assure the potential benefits produced by BIM, thereby contributing to the practice.

This paper aims to propose novel flexible structure-supported tilting-pad aerostatic bearings and to improve operational stability and vibration reduction of aerostatic bearings.

The authors established an aerostatic bearing-rotor test rig and designed two aerostatic tilting-pad bearings with different flexible support structure and an ordinary aerostatic tilting-pad bearing and then examined their effects in dynamic performance to assess the vibration reduction performance of different flexible structures. Furthermore, the authors proposed three gas supply methods and conducted experiments to study the influence of gas supply methods in the performance of bearings.

The experimental results show that among the three structures, the double-layer flexible structure-supported tilting-pad bearing demonstrates outstanding vibration damping performance and it significantly enhances the operational stability of the bearing-rotor system. Furthermore, the experimental results indicate that the gas supply method has a significant impact on the performance of the aerostatic bearing. There is a certain pressure difference between the gas supply pressure for the loading pads and that for the nonloading pads, which is advantageous for increasing the operational stability and reducing system vibration.

The authors designed novel flexible aerostatic tilting-pad journal bearing structures, which can enhance the operational stability and reduce vibrations of the bearing. Additionally, this article proposes an air supply method advantageous for increasing the stability of the bearing and reducing system vibrations.

This paper aims to review the status of development of building information modelling (BIM), its trends and themes across the six continents of the world.

A total of 914 journal articles sought from the search engine of Web of Science (WOS) based on the country/region option of the WOS to group them into continents. A best-fit approach was then applied in selecting the suitable software programmes for the scientometric analysis and comparisons and deductions were made.

The findings revealed that there are differences in the development of BIM across the six continents of the world. South America and Africa are lagging in the BIM research and Australia and Asia are growing, whilst Europe and North America are ahead. In addition, there exist differences in the research themes and trends in these continents as against the single view presented in extant studies.

This study introduced a new approach to carry out a comparative and taxonomic review and has provided both academic researchers and industrial practitioners with a clear status of development of BIM research and the trend across the six continents of the world.

In recent years, deep learning and extended reality (XR) technologies have gained popularity in the built environment, especially in construction engineering and management. A significant amount of research efforts has been thus dedicated to the automation of construction-related activities and visualization of the construction process. The purpose of this study is to investigate potential research opportunities in the integration of deep learning and XR technologies in construction engineering and management.

This study presents a literature review of 164 research articles published in Scopus from 2006 to 2021, based on strict data acquisition criteria. A mixed review method, consisting of a scientometric analysis and systematic review, is conducted in this study to identify research gaps and propose future research directions.

The proposed research directions can be categorized into four areas, including realism of training simulations; integration of visual and audio-based classification; automated hazard detection in head-mounted displays (HMDs); and context awareness in HMDs.

This study contributes to the body of knowledge by identifying the necessity of integrating deep learning and XR technologies in facilitating the construction engineering and management process.