Search results

This paper aims to study the influence of different reinforcement methods on crack monitoring characteristics of eddy current array sensors, and the sensors with two different reinforcement methods, SUS304 reinforcement and permalloy reinforcement, are proposed.

First, the finite element model of the sensor is established to analyze the influence of the reinforcement plate’s electromagnetic parameters on the crack identification sensitivity. Then, the crack monitoring accuracy test of sensors with two reinforcement methods is carried out. Finally, the fatigue crack monitoring experiments with bolt tightening torques of 45 and 63 N · m are carried out, respectively.

In this study, it is found that the crack identification sensitivity of the sensor can be improved by increasing the relative permeability of the reinforcement plate. The crack monitoring accuracy of the sensors with two different reinforcement methods is about 1 mm. And the crack identification sensitivity of the sensor reinforced by permalloy reinforcement plate is significantly higher than that of the sensor reinforced by SUS304 reinforcement plate.

The sensor reinforced by reinforcement plate can work normally under the squeezing action of the bolt, and the crack monitoring sensitivity of the sensor can be significantly improved by using the reinforcement plate with high relative permeability.

The flexible eddy current array sensor has the characteristics of lightweight and flexibility, which has a great application prospect in the field of fatigue crack monitoring. But the exciting layout and feature signal extraction have a great influence on the crack monitoring characteristics of the sensor. This paper aims to propose a method using crack disturbed voltage as sensitivity to characterize crack propagation.

Flexible eddy current array sensors with reverse and codirectional exciting layout are proposed, and the advantages and disadvantages of three characterization methods based on the change of trans-impedance amplitude, the change of the trans-impedance’s real and imaginary part and the crack disturbed voltage are compared and analyzed by finite element simulation. Finally, the fatigue crack monitoring experiment is carried out.

The crack disturbed voltage and the change of trans-impedance’s imaginary part can effectively characterize the crack propagation for sensors with different exciting layouts. The codirectional exciting layout sensor has better crack identification sensitivity than the reverse exciting layout sensor, especially the induction coil 2. When the distance between the exciting coil and the induction coil is 0.1, 0.2 and 0.3 mm, it is increased by 372.09%, 295.24% and 231.43%, respectively.

Crack disturbed voltage can effectively characterize the crack propagation for sensors with two different exciting layouts.

Flexible eddy current array (FECA) sensor is flexible and light in weight, which has broad application prospects in structural health monitoring. But, the sensor’s sensing channel number is more, increasing the added mass of sensor networks. This paper aims to reduce the sensing channel number by changing the sensing coil layout.

In this paper, FECA sensors with series sensing coil (SSC) layout and interactive sensing coil (ISC) layout are proposed, which reduce the number of sensor’s channels by half. Then, the variation of the output signal of the sensor when the crack expands along both sides of the hole is analyzed by simulation model. Finally, the fatigue crack monitoring experiment is carried out.

For the SSC layout, the simulation results show that the amplitude of each SSC group of the sensor increases when the crack propagates to the left or right. For the ISC layout, when the crack propagates on the right side of bolt hole, the induced voltage of each ISC group decreases. When the crack propagates on the left side of bolt hole, the induced voltage of each ISC group increases. The experiment results are consistent with simulation results, which verifies the correctness of simulation model. Compared with SSC layout, the ISC layout can judge the crack propagation direction. And the crack monitoring accuracy is 1 mm.

The research results provide a certain reference for reducing the number of sensor’s sensing channels. Results of the simulation and experiment show that the ISC layout can judge the crack propagation direction, and the crack monitoring accuracy is 1 mm.

This paper aims to illustrate the trends of income growth and income inequality and examines the dynamics and determinants of income mobility in rural China from 2003 to 2006.

The authors decomposed the Gini coefficient by different sources and analyzed income mobility using the method of income transition matrix. The authors then estimated the effects of demographic variables, labor migration, and other household characteristics on income growth using a dynamic panel data model.

The study obtained important findings on income mobility and income inequality in rural China. First, annual income inequality in rural China was smoothed during this period after a decline from 2003, with the largest contribution from the income of migration work. Second, income mobility remained rather stable and relatively high, with higher mobility in the interior provinces than in the coastal provinces. Third, the income levels of the poor and the wealthy households converged during this period after controlling other factors. Fourth, income growth depends on in the households' demographic composition, their human capital accumulation, and their chances of getting migration jobs.

The sound econometric methods applied to the most current rural household survey data provide important contributions to the literature of income inequality and income mobility in China.

To develop electrode materials for supercapacitor with superior electrochemical performance and simple preparation process, the purpose of this study is to prepare flexible CC/NiS/a-NiS electrodes with self-supporting structure by loading hydrothermally synthesized a-NiS particles along with nano-NiS on carbon cloth by electroplating method.

The effects of current densities, temperatures and pH values on the loading amount and uniformity of the active substances during the plating process were investigated on the basis of optimization of surface morphology, crystalline structure and electrochemical evaluation as the cyclic voltammetry curves, constant current charge–discharge curves and AC impedance.

The a-NiS particles on CC/NiS/a-NiS were mostly covered by the plated nano-NiS, which behaved as a bulge and provided a larger specific surface area. The CC/NiS/a-NiS electrode prepared with the optimized parameter exhibited a specific capacitance of 115.13 F/g at a current density of 1 A/g and a Coulomb efficiency of 84% at 5 A/g, which is superior to that of CC/NiS electrode prepared by electroplating at a current density of 10 mA/cm², a temperature of 55°C and a pH of 4, demonstrating its fast charge response of the electrode and potential application in wearable electronics.

This study provides an integrated solution for the development of specifically structured NiS-based electrode for supercapacitor with simple process, low cost and high electrochemical charge/discharge performance, and the simple and easy-to-use method is also applicable to other electrochemically active composites.