Search results

Transfer relations represent analytical solutions of the linear theory of circular arches, relating each one of the kinematic and static variables at an arbitrary cross-section to the kinematic and static variables at the initial cross-section. The purpose of this paper is to demonstrate the significance of the transfer relations for structural analysis by means of three examples taken from civil engineering.

The first example refers to an arch bridge, the second one to the vault of a metro station and the third one to a real-scale test of a segmental tunnel ring.

The main conclusions drawn from these three examples are as follows: increasing the number of hangers/columns of the investigated arch bridge entails a reduction of the maximum bending moment of the arch, allowing it to approach, as much as possible, the desired thrust-line behavior; compared to the conventional in situ cast method, a combined precast and in situ cast method results in a decrease of the maximum bending moment of an element of the vault of the studied underground station by 46%; and the local behavior of the joints governs both the structural convergences and the bearing capacity of the tested segmental tunnel ring.

The three examples underline that the transfer relations significantly facilitate computer-aided engineering of circular arch structures, including arch bridges, vaults of metro stations and segmental tunnel rings.

This research aims to systematically explore the cognitive and emotional effects of values-related and performance-related negative brand publicity and investigate how the psychological effects translate into different behavioural outcomes. In addition, it examines the relative effectiveness of two major brand response strategies in mitigating negative publicity.

Two experimental studies were conducted to test the hypotheses. Study 1 examines the effects of values- and performance-related negative brand publicity, using a 3 (negative brand publicity: values-related vs performance-related vs control) × 2 (brand: Dove vs Axe) between-subjects experiment. Study 2 further compares the effects of two major brand response strategies on consumers’ post-crisis perceived trustworthiness and trust and responses towards a brand involved in negative publicity. A 2 (negative brand publicity: values-related vs performance-related) × 2 (brand response strategy: reduction-of-offensiveness vs corrective action) between-subjects design was used.

The results suggest that values-related negative brand publicity is perceived as being more diagnostic and elicits a stronger emotion of contempt, but a weaker emotion of pity than performance-related negative brand publicity. Moreover, values-related negative brand publicity has a stronger negative impact on consumer responses than performance-related negative brand publicity. Interestingly, compared to perceived diagnosticity of information and the emotion of pity, the emotion of contempt is more likely to cause differences in consumer responses to these two types of negative brand publicity. Regarding brand response strategy, corrective action is more effective than reduction-of-offensiveness for both types of negative brand publicity, but the advantage of corrective action is greater for the performance-related case.

This research enriches the negative publicity and brand perception literature, showing the asymmetric cognitive, emotional and behavioural effects of values- and performance-related negative brand publicity. It also identifies the psychological mechanisms underlying consumer responses to negative brand publicity, and it provides empirical evidence for the relative effectiveness of two major brand response strategies.

Given the growing preference for internet celebrity restaurants, it is crucial to explore how internet celebrity restaurants can maintain customer loyalty. Therefore, this study aims to examine the connections between brand cognition [emotion value, brand symbol (BS) and brand experience (BE)], brand resonance (BR) and revisit intention.

In this paper, the authors use a theoretical model to test the relationship between cognition and intention. A total of 366 volunteers were recruited to participate in this research. Hypothesis testing and a moderated mediation model were used to measure the results.

BR acts as a mediator in the interaction between emotion value, BS, experience and repurchase intention (RI). Surprisingly, the authors also discover that electronic word-of-mouth (e-WOM) acceptance negatively modifies the relationship between brand cognition and BR. Internet exposure (IE) helps consumers perceive BE and BSs more favorably.

Managers should be aware of how internet celebrity BR is built. Specifically, they can use cultural or emotional elements to maintain relationships with consumers. Furthermore, to lessen the negative consequences of e-WOM, managers should work to maintain positive WOM consistency.

The research advances our knowledge of RI in internet celebrity restaurants settings. This study pioneers an investigation of how brand cognition is related to RI through BR’s mediating effect. It enriches this research perspective of the emerging restaurant literature. By analyzing the boundary impact of internet transmission on resonance, it also advances the literature.

We empirically investigate the hypothesis that the less transparent (more difficult to value) the target’s assets are the more likely it is that the acquiring firm can obtain higher short- and long-term returns. We analyze a sample of 1,538 friendly acquisitions partitioned in two separate dimensions: acquisitions of public versus private firms, and acquisitions of a firm’s assets versus acquisitions of a firm’s assets and its management. Using a sample of (nondiversifying) real estate transactions with a public REIT as the acquirer, we find that acquisitions of public firms have insignificant short-term abnormal returns. Acquisitions of private targets have positive and significant short-term abnormal returns. The acquirer’s abnormal returns are higher in both cases when the transactions involve acquisition of the target firm’s management. We find parallel results when analyzing the acquirer’s Q over the merger year and the three following years. Our conclusions are robust to the type of financing (cash, stock, or a combination) used in the acquisition.

It is a very prominent problem that Chinese universities lack school-running characteristics. In the past ten years, because of undergraduate teaching assessment requirements of the Ministry of Education, universities attach great importance to school-running characteristics. What is the reality and how to improve the effectiveness of creating the school-running characteristics of universities? It is a problem that needs to be solved. The purpose of this paper is to discuss these issues.

Using the survey method, literature study, case studies and other methods, this study reviewed ten years of school-running characteristics construction and explored some laws of creating school-running characteristics.

This study found although universities in China are beginning to attach great importance to the school-running characteristics, but they are still staying in the summarization of characteristics. School-running characteristics are very rough. Creating school-running characteristics are mainly efforts responding to the superior government. Creating school-running characteristics should be based on category characteristic. Universities need to change in competition and create characteristics within its history and culture. Universities need to refine the core idea of education, develop a big picture and then renew them in the assessment cycle.

The originality of this study was that it put forward some new laws including changing from summarizing to creating its own school-running characteristics, putting category characteristic as the prerequisite and considering the core idea of education as the focus of school-running characteristics. This research will enrich the theory building of higher education research and has some value in promoting the creation of school-running characteristics.

Product liability refers to the liability of producers, distributors and suppliers for consumers’ property losses or personal injury caused by that product. This paper conducted a survey related to product liability issues in Shenzhen City, and did an in‐depth analysis of current problems. Finally, the paper puts forward corresponding suggestions for improvement of Shenzhen City product liability status.

The purpose of this paper is to propose meta‐synthetic ideas and knowledge asset management approaches to build a comprehensive strategic framework for Beijing City in China.

Methods include a review of relevant literature in both English and Chinese, case studies of different types of support frameworks in the UK, the USA, Singapore and Hong Kong, formulation of a meta‐synthetic support framework for Beijing City, and justification of its application to policy development by various studies. Three stages of meta‐synthetic support frameworks are proposed.

The suggested meta‐synthetic support frameworks are highly appropriate for the optimisation of, and innovation in, management and services systems of government information resources. The proposed knowledge asset management approaches offer significant practical value in improving the competence and capabilities of service‐oriented government, providing a set of solutions to identified, urgent problems, including a joint administration system for creating value, a release and distribution management system for sharing and protecting value, and a licensing and authorisation management system for adding value.

This paper focuses on the formulation of a theoretical support framework for the reuse of government information resources and the justification of its effectiveness to guide policy development at strategic level. Case studies of its application at operational level are ongoing and will be discussed in future papers.

The suggested meta‐synthetic support frameworks support the efficiency, effectiveness and economy of intelligent traffic administration, good governance of value‐added services based on government information resources, and intellectual activity around city travel and traffic. The study has wide implications for the improvement of service‐oriented government performance, public satisfaction and the image of government.

The paper presents the adaptation of meta‐synthetic ideas and knowledge asset management approaches to collaboration, optimisation, innovation and compliance management issues in the reuse of government information resources. The advantages of different types of support systems and frameworks are integrated as a coherent whole for a strategic framework of legal, regulatory and standards support to China and Beijing.

Currently, the Tang tomb mural cultural relic resources are presented in a multi-source and heterogeneous manner, with a lack of effective organization and sharing between resources. Therefore, this study aims to propose a multidimensional knowledge discovery solution for Tang tomb mural cultural relic resources.

Taking the Tang tomb murals collected by the Shaanxi History Museum as an example, based on clarifying the relevant concepts of Tang tomb mural resources and considering both dynamic and static dimensions, a top-down approach was adopted to first construct an ontology model of Tang tomb mural type cultural relics resources. Then, the actual case data was imported into the Neo4J graph database according to the defined pattern hierarchy to complete the static organization of knowledge, and presented in a multimodal form in knowledge reasoning and retrieval. In addition, geographic information system (GIS) technology is used to dynamically display the spatiotemporal distribution of Tang tomb mural resources, and the distribution trend is analysed from a digital humanistic perspective.

The multi-dimensional knowledge discovery of Tang tomb mural cultural relics resources can help establish the correlation and spatiotemporal relationship between resources, providing support for semantic retrieval and navigation, knowledge discovery and visualization and so on.

This study takes the murals in the collection of the Shaanxi History Museum as an example, revealing potential knowledge associations in a static and intelligent way, achieving knowledge discovery and management of Tang tomb murals, and dynamically presents the spatial distribution of Tang tomb murals through GIS technology, meeting the knowledge presentation needs of different users and opening up new ideas for the study of Tang tomb murals.

The purpose of this paper is to improve the properties of Sn−9Zn solder, so as to meet the requirements of industrial applications.

The effects of Praseodymium on property and Sn whisker growth under aging treatment in Sn−9Zn lead‐free solder were investigated.

The results indicate that with the addition of rare earth Pr, the wettability and mechanical properties of Sn−9Zn solder were improved. The best wettability and comprehensive property of soldered joint is obtained when the content of Pr is 0.08 wt.%. After aging treatment at 150°C for 360 h, the mechanical properties of Sn−9Zn−0.08Pr decreased but are still obviously higher than that of Sn−9Zn. Moreover, when the content of Pr reached 0.1 wt.%, plenty of Sn−Pr compounds were found in the Sn−9Zn solder. The inevitable oxidation of Sn−Pr compounds would cause a high stress accumulated within PrSn3 phases, which would be served as driving force to induce the Sn whisker sprout and growth after aging treatment at 150°C for 120 h to 360 h. Compared with the results in Sn−9Zn−0.5Ga−0.7Pr solder that Sn whisker observed until the addition of Pr reached 0.7 wt.%, it could be inferred that the addition of Ga may react against the sprout of Sn whisker.

It is found that the addition of Pr can improve the properties of solder and avoid Sn whisker growth in the right range and proper conditions. The cost of the solder with added Pr is limited to RMB 2 yuan/kg so it can be widely used in industry.

The purpose of this paper is to investigate the growth behavior and mechanism of Sn whisker induced by RE addition in Sn‐Zn‐Ga‐Pr solder at ambient condition.

By means of aging treatment, FIB and SEM microstructure analysis, the whisker growth behavior was investigated.

It was found that the morphologies of tin whisker are changed during air exposure. After 60 days aging, the average length of the longest whiskers could reach up to 70 μm, some whiskers even can grow to a length of 100 μm. It was discussed that the oxidation of Pr‐Sn intermetallics provides driving force for whisker growth.

Tin whisker growth is a complex reliability issue for lead‐free solder. The current research can be helpful in re‐understanding the issue of tin whisker growth as well as an enriched understanding on the effects of REs on lead‐free solders.