Search results

This paper aims to develop a novel miniature 3-axis force sensor which can detect the interaction forces during tissue palpation in MIS (minimally invasive surgery). MIS offers many significant merits compared with traditional open surgery, the wound to the patients and the postoperative pains are alleviated and reduced dramatically. However, the inherent drawback due to lack of force feedback still exists while conducting some operation procedures. For example, tissue palpation performed easily during open surgery could not be realized in an MIS manner.

The force sensor is based on the resistive-based sensing method that utilizes strain gauges to measure the strain when the external loads are acting on the tip of the sensor. A novel flexible tripod structure with bending and compression deformations is designed to discriminate the magnitudes and directions of the three orthogonal force components. A linear characteristic matrix is derived to disclose the relationship between the sensitivity and the geometric parameters of the structure, and a straightforward geometric parameterized optimization method considering the sensitivity isotropy is proposed to provide the sensor structure with high sensitivity and adequate stiffness.

The sensor prototype can perform force measurement with sensing ranges of ± 3.0 N in axial direction and ± 1.5 N in radial direction, and the resolutions are 5 per cent and 1 per cent, respectively. It is concluded that this force sensor is compatible with MIS instruments and the ex-vivo experiment shows that the sensor can be used to perform tissue palpation during MIS procedures.

This paper is intended to address the significant role of force sensing and force feedback during MIS operations, and presents a new application of the resistive-based sensing method in MIS. A tripod structure is designed and a straightforward optimization method considering the sensitivity isotropy of the sensor is proposed to determine geometric parameters suited for the given external loads.

The purpose of this study is to establish a method for accurately extracting torch and seam features. This will improve the quality of narrow gap welding. An adaptive deflection correction system based on passive light vision sensors was designed using the Halcon software from MVtec Germany as a platform.

This paper proposes an adaptive correction system for welding guns and seams divided into image calibration and feature extraction. In the image calibration method, the field of view distortion because of the position of the camera is resolved using image calibration techniques. In the feature extraction method, clear features of the weld gun and weld seam are accurately extracted after processing using algorithms such as impact filtering, subpixel (XLD), Gaussian Laplacian and sense region for the weld gun and weld seam. The gun and weld seam centers are accurately fitted using least squares. After calculating the deviation values, the error values are monitored, and error correction is achieved by programmable logic controller (PLC) control. Finally, experimental verification and analysis of the tracking errors are carried out.

The results show that the system achieves great results in dealing with camera aberrations. Weld gun features can be effectively and accurately identified. The difference between a scratch and a weld is effectively distinguished. The system accurately detects the center features of the torch and weld and controls the correction error to within 0.3mm.

An adaptive correction system based on a passive light vision sensor is designed which corrects the field-of-view distortion caused by the camera’s position deviation. Differences in features between scratches and welds are distinguished, and image features are effectively extracted. The final system weld error is controlled to 0.3 mm.

This study aims to provide a comprehensive overview of the current state of the art in powder bed fusion (PBF) techniques for additive manufacturing of multiple materials. It reviews the emerging technologies in PBF multimaterial printing and summarizes the latest simulation approaches for modeling them. The topic of “multimaterial PBF techniques” is still very new, undeveloped, and of interest to academia and industry on many levels.

This is a review paper. The study approach was to carefully search for and investigate notable works and peer-reviewed publications concerning multimaterial three-dimensional printing using PBF techniques. The current methodologies, as well as their advantages and disadvantages, are cross-compared through a systematic review.

The results show that the development of multimaterial PBF techniques is still in its infancy as many fundamental “research” questions have yet to be addressed before production. Experimentation has many limitations and is costly; therefore, modeling and simulation can be very helpful and is, of course, possible; however, it is heavily dependent on the material data and computational power, so it needs further development in future studies.

This work investigates the multimaterial PBF techniques and discusses the novel printing methods with practical examples. Our literature survey revealed that the number of accounts on the predictive modeling of stresses and optimizing laser scan strategies in multimaterial PBF is low with a (very) limited range of applications. To facilitate future developments in this direction, the key information of the simulation efforts and the state-of-the-art computational models of multimaterial PBF are provided.