Search results

The purpose of this paper is to use the theoretical perspective of structural inertia as a unique lens to study foreign sequential entry mode choices of multinational firms.

It adopts quantitative analysis of a sample of 121 Chinese publicly listed firms with 564 foreign entry incidents in the 2001-2012 period to test the hypotheses.

The empirical results show that multinational firms have a tendency to adopt the same mode in the subsequent entry as the number of prior entry mode choice of a given type (joint venture (JV) in this study) increases. The results support the theoretical prediction that organizations repeat their past activities due to structural inertia. Moreover, such an inertia effect in foreign sequential entry mode choices becomes stronger for older multinational firms, larger multinational firms and state-owned multinational firms.

Consistent with existing research, this study focuses on the entry mode choice between JV and wholly owned subsidiaries. However, it is better to examine the relationship identified in the study for different types of entry mode choices to assess result generalizability.

It reminds managers of multinational firms that they should be cautious to the influence of structural inertia that can be a barrier to strategic flexibility when they make entry mode choices.

The main contribution of this study resides in introducing structural inertia perspective to help understand the determinants of foreign sequential entry mode choices of multinational firms.

Based on the linkage-leverage-learning (LLL) framework developed by Mathews (2006), the purpose of this paper is to examine how linking, leveraging and learning capabilities influence the choice of foreign-entry mode, and the way such influences are contingent on context factors in the emerging markets.

Contrary to a prior literature applying the LLL framework, which mainly used case studies, this paper adopts a quantitative approach and is based on a sample of 321 Chinese listed companies to test the hypotheses.

The results show that multinational firms from emerging markets (EMFs) with stronger LLL capabilities are more likely to choose the wholly owned mode in foreign entries. In addition, the relationship between linking capability and wholly owned entry mode choice is weaker at higher levels of cultural distance between home and host country. At the same time, the relationship between learning capability and wholly owned entry mode choice is weaker at higher levels of cultural distance between home and host country, and of institutional distance between prior entries and the focal entry.

An entry mode strategy for firms without ownership advantages and the identification of boundary conditions for applying different LLL capabilities are recommended. The generalizability of the findings from a single-country setting still needs further validation with other emerging economies.

This paper treats internationalization of firms from emerging countries with a different perspective. The underlying idea in this study is that internationalization is not only a process for EMFs to utilize externally accessible assets abroad, but also a process of simultaneously combining internationalization with experiential learning and capability utilization in overseas markets. In addition, the authors also contribute to the literature by providing strong empirical evidence for validating the LLL model and extending the existing entry mode studies.

The purpose of this paper is to develop a small data set forecasting method to improve the effectiveness when making managerial decisions.

In the grey modeling process, appropriate background values are one of the key factors in determining forecasting accuracy. In this paper, grey compensation terms are developed to make more appropriate background values to further improve the forecasting accuracy of grey models.

In the experiment, three real cases were used to validate the effectiveness of the proposed method. The experimental results show that the proposed method can improve the accuracy of grey predictions. The results further indicate that background values determined by the proposed compensation terms can improve the accuracy of grey model in the three cases.

Previous studies determine appropriate background values within the limitation of traditional grey modeling process, while this study makes new background values without the limitation. The experimental results would encourage researchers to develop more accuracy grey models without the limitation when determining background values.

The purpose of this paper is to investigate the relationship between leader-member exchange (LMX), job satisfaction (JS), life satisfaction (LS), and psychological capital (PC) for employee relation management.

A total of 319 valid questionnaires were received from employees of financial and electronics manufacturing industries in Taiwan, and they were then analyzed using a structuring equation model with SPSS 12.0 and LISREL 8.8.

Good LMX increases psychological capital. Psychological capital enhances both JS and LS, and psychological capital serves as a full mediator for both JS and LS. A moderating effect of industrial characteristics is found between LMX and LS and between psychological capital and LS.

The findings suggest that managers need to focus on leadership style in order to develop employees’ life and JS through building psychological capital.

This study not only obtained further support for predictions derived from the LMX theory but was also a more extensive analysis of the meaningful relationships between job and LS with a mediating effect of psychological capital on employee relation management.

Purpose: The purpose has multiple purposes. Hence, this study has been conducted not only to shed light on the factors associated with place attachment but also to make people understand the two-way association between firm performance and CSR activities of small-scale tourism companies.

Significance and Scope: This chapter is specifically written in association with the tourism industry to make readers understand the implication of place attachment with CSR activities. This chapter also has a role in theoretical optimization as it highlights possible two-way associations between firm performance and CSR.

Research Gap: The lack of studies associated with this point is the major cause of concern. Therefore, this study has been conducted specifically to understand the importance of place attachment for CSR activities of small-scale tourism companies. Moreover, almost all of the studies conducted in this vein highlighted only the reasons for place attachment and their association with the CSR of the small-scale tourism industry. None of the studies are inclined toward model extension and enhancement.

Data Collection: Data have been collected through published material to develop postulates and models authentically.

Findings: After the compilation of data, it has been presumed that place attachment is one of the important elements in CSR activities of small-scale tourism businesses. However, the model can be reassessed in two-way association as a decline in the company's performance may also cause a decline in CSR activities and also in place attachment.

The purpose of this research is to achieve a novel magnetic nutation drive for an industry robotic wrist reducer.

A novel magnetic nutation drive is proposed, and the structure and principle of the designed magnetic nutation drive are described in this study. Three-dimensional finite element analysis is used to compute the magnetic and torque of the magnetic nutation drive. Furthermore, a prototype of this novel magnetic nutation drive device is developed with 3D printing technology and tested to verify the feasibility of the proposed structure and principle.

The simulation and experimental results indicated that the proposed magnetic nutation drive device could meet the desired specifications, and that this novel magnetic nutation drive device successfully realized the non-contact transmission ratio of 105:1 required for a robotic wrist reducer.

This novel magnetic nutation drive is low-cost and easy to make and use, and which provides the non-contact transmission ratio of 105:1 required for a robotic wrist reducer.

For the first time, this research applies the permanent magnet drive technology to nutation drive and puts forward a new non-contact nutation drive mode. The novel drive mode can solve some problems of the traditional mechanical contact nutation drive, such as vibration, friction loss, mechanical fatigue and necessity of lubrication. The proposed non-contact nutation drive device can achieve a high reduction ratio with compact structure and can be suitable for industry application.

The purpose of this paper is to provide an overview of studies published in the Journal of Entrepreneurship in Emerging Economies (JEEE) between 2014 and 2019. The review also provides suggestions for future research in JEEE.

Integrative literature of 90 empirical and conceptual articles published in JEEE between 2014 and 2019. The selected articles were analyzed using content analysis.

Analysis of the 90 published articles shows that JEEE has covered a number of relevant topics related to entrepreneurship and innovation in emerging economies. In particular, scholars have adopted a variety of methods to describe such activities in emerging economies. The review also highlights the lack of comparative studies in JEEE and studies, which significantly take into account or focus on the emerging economy context.

The findings suggest that future scholars wishing to submit to JEEE should consider taking a more detailed account of the emerging context.

Since its first publication in 2014, this study represents the first review of articles found in JEEE. Specifically, the study provides a platform for future scholars wishing to submit to JEEE to take stock of the studies in the journal, thus giving them a better understanding of the field. The study also provides directions regarding areas of possible future research, which might be of interest to scholars wishing to submit to JEEE.

At present, the conventional method of preparing cationic fluorinated acrylic latex is to emulsify copolymerised monomers with cationic surfactants. However, there has been a wide concern about using Gemini surfactants to prepare cationic polymer latex to improve its properties. The purpose of this paper was to focus on the synthesis of novel self-crosslinked cationic fluorinated acrylic latex (SCFAL), during which the copolymerised monomers were initiated with a water soluble azo initiator and emulsified with mixed surfactants of Gemini emulsifier and alkyl polyglycoside (APG).

The novel SCFAL was prepared successfully by the semi-continuous seeded emulsion polymerisation of butyl acrylate, methyl methacrylate, hexafluorobutyl methacrylate (HFMA) and hydroxy propyl methacrylate (HPMA) in aqueous medium.

The conversion is the maximum and the coagulation percentage the minimum when the amounts of emulsifier and initiator are 8 and 0.6 per cent, respectively. The average particle size of the latex is significantly reduced with the increase of the amount of emulsifiers used. However, the average particle size of the latex is increased with the increase of the amount of HPMA. The particle size of the latex is of a unimodal distribution, which means that the particle size was reasonably uniform. Contact angle is increased with the increase of the amount of the HFMA.

The novel SCFAL can be widely used as significant components in the field of coatings, leather, textile, paper, adhesives and so on.

SCFAL, which was emulsified with novel mixed surfactants of Gemini surfactant and APG, has been prepared successfully. Influences of amount of initiator, emulsifier, HPMA and HFMA on emulsion polymerisation and/or properties of novel latex are investigated in detail.

This paper aims to provide SIF calculation method for engineering application.

In this paper, the stress intensity factors (SIFs) calculation method is applied to the anisotropic Ni-based single crystal film cooling holes (FCHs) structure.

Based on contour integral, the anisotropic SIFs analysis finite element method (FEM) in Ni-based single crystal is proposed. The applicability and mesh independence of the method is assessed by comparing the calculated SIFs using mode of plate with an edge crack. Anisotropic SIFs can be calculated with excellent accuracy using the finite element contour integral approach. Then, the effect of crystal orientation and FCHs interference on the anisotropic SIFs is clarified. The SIFs of FCH edge crack in the [011] orientated Ni-based single crystal increases faster than the other two orientations. And the SIF of horizontal interference FCHs edge crack is also larger than that of the inclined interference one.

The SIFs of the FCH edge crack in the turbine air-cooled blade are innovatively computed using the sub-model method. Both the Mode I and II SIFs of FCHs edge crack in blade increase with crack growing.

The purpose of this paper is to develop a combined method for three-dimensional incompressible flow and heat transfer by the spectral collocation method (SCM) and the artificial compressibility method (ACM), and further to study the performance of the combined method SCM-ACM for three-dimensional incompressible flow and heat transfer.

The partial differentials in space are discretized by the SCM with Chebyshev polynomial and Chebyshev–Gauss–Lobbatto collocation points. The unsteady artificial compressibility equations are solved to obtain the steady results by the ACM. Three-dimensional exact solutions with trigonometric function form and exponential function form are constructed to test the accuracy of the combined method.

The SCM-ACM is developed successfully for three-dimensional incompressible flow and heat transfer with high accuracy that the minimum value of variance can reach. The accuracy increases exponentially along with time marching steps. The accuracy is also improved exponentially with the increasing of nodes before stable accuracy is achieved, while it keeps stably with the increasing of the time step. The central processing unit time increases exponentially with the increasing of nodes and decreasing of the time step.

It is difficult for the implementation of the implicit scheme by the developed SCM-ACM. The SCM-ACM can be used for solving unsteady impressible fluid flow and heat transfer.

The SCM-ACM is applied for two classic cases of lid-driven cavity flow and natural convection in cubic cavities. The present results show good agreement with the published results with much fewer nodes.

The combined method SCM-ACM is developed, firstly, for solving three-dimensional incompressible fluid flow and heat transfer by the SCM and ACM. The performance of SCM-ACM is investigated. This combined method provides a new choice for solving three-dimensional fluid flow and heat transfer with high accuracy.