Search results

Purpose: This paper contains an evaluation of the results from a survey on ISO 9000 certified hotels in Egypt. This study is focused on factors influencing the choice of the registration agency; problems with registration agencies; satisfaction level with the registration agencies and the use of training and consultancy in achieving the certification. Design/methodology/approach: Postal survey was used in this study to gather the required data from a sample size of 40 certified large hotels in Egypt. The sample was drawn from a list provided by ISO 9000 certification office in Egypt. A response rate of 60 per cent was achieved. Findings: The certified hotels in Egypt performed well in their registration process and benefited from ISO implementation. They were using their registration agencies for private consultancy and it has been recommended that they should avoid using their registration agencies for private consultancy as this creates conflict of interest and constitutes a violation of ISO 62. Originality/value: Adds to the body of knowledge concerning the ISO 9000 registration agencies in the service sector with particular focus on Egypt.

On 15 December 2000, the International Organisation for Standardisation published a new series of ISO 9000 standards. There are significant changes in this third edition standard. Several specific surveys and analysis revealed the key concerned areas of the certified companies and the significant changes in the new standard are on the key system areas. Develops a new model explicatory to assist those certified organisations to link their concerned areas with that of the new standard. In this model, management activity is the key element. The information can be used in the analysis to determine the areas for continual improvement. Reveals that top management are still weak in the adoption of quality management systems, establishment and implementation of the quality policy and objectives. Recommends use of SMART approach. At the same time, certified organisations spend a lot of effort for the compliance with the process approach management. Discusses the benefits of using process approach management. Besides the plan‐do‐check‐act approach in continuous improvement, introduces the Xerox Management Model. Finally, introduces the consideration of improving quality management systems in areas of effectiveness, efficiency, productivity, flexibility and adaptability, rather than product.

This research aims to investigate the relationships among employee involvement, partnership management, and a firm's supply performance in the automotive industry in Thailand.

The measurement instruments for employee involvement, partnership management and a firm's supply performance were developed based on an extensive literature review, and validated by experts. They were pilot‐tested, and analyzed using various statistical techniques to ensure reliability and validity in structural equation modeling constructs. A hypothesized model was tested through path analysis.

The study found that the measurements of employee involvement, partnership management, and a firm's supply performance are reliable and valid for Thailand's automotive industry. Employee involvement has not only a significant direct positive impact on partnership management and firm's supply performance, but also a significant indirect positive impact on a firm's supply performance through partnership management.

The distribution of paper‐based questionnaires was a convenience sample. Although data from a sample of 211 companies was collected, only 19 percent of them provided more than one response. Future research should apply different random sampling methods, and investigate the reasons for and ways to improve the low multiple‐response rate.

The findings are beneficial to managers in the automotive industry in developing countries who want to improve partnership management and supply performance through employee involvement.

This study is one of the first to examine the linkage among internal employee involvement, external partnership management, and a firm's supply performance in the automotive industry in a newly industrialized country such as Thailand. It can be used in further research on the new concept of supply chain quality management.

The purpose of this paper is to develop an instrument that measures the effectiveness of the ISO 9001 Quality Management System (QMS), based on its components, meaning the ISO 9001 objectives; and to validate this instrument in the food manufacturing sector.

Bearing in mind the definition of “ISO 9001 effectiveness”, the ISO 9001 objectives and their indicators are identified in the literature. Based on these indicators, a measurement instrument is developed and then empirically validated through collecting preliminary data from 335 Greek food manufacturing small and medium‐sized enterprises (SMEs). After testing the assumptions of multivariate analysis, exploratory factor analysis as well as first and second order confirmatory factor analysis are applied.

The data collected reveal, as identified in the literature, the three‐dimensional nature of the ISO 9001 objectives (continuous improvement, prevention of nonconformities and customer satisfaction focus). The responding food manufacturing SMEs demonstrate a high level of achievement of these objectives. Further analysis of the data also reveals a valid latent factor reflecting the successful achievement of the ISO 9001 objectives, namely “ISO 9001 effectiveness”.

The present study focuses on food manufacturing SMEs. Therefore, it is worth validating the measurement instrument on large food manufacturing companies, food service companies, companies of specific food sub‐sectors, non‐food companies and finally on companies operating in different economic conditions to Greece.

This measurement instrument can be used by a food manufacturing SME as a self assessment tool and a benchmarking tool. In doing so, suitable strategies can be selected in order for a food SME to improve quality, gain competitive advantage and overcome the current downturn.

In this paper, a measurement instrument is developed and validated in food manufacturing SMEs, based on measures describing the ISO 9001 objectives; in other words, ISO 9001 effectiveness.

This paper aims to present a robust prediction method for estimating the quality of electronic products assembled with pin-in-paste soldering technology. A specific board quality factor was also defined which describes the expected yield of the board assembly.

Experiments were performed to obtain the required input data for developing a prediction method based on decision tree learning techniques. A Type 4 lead-free solder paste (particle size 20–38 µm) was deposited by stencil printing with different printing speeds (from 20 mm/s to 70 mm/s) into the through-holes (0.8 mm, 1 mm, 1.1 mm, 1.4 mm) of an FR4 board. Hole-filling was investigated with X-ray analyses. Three test cases were evaluated.

The optimal parameters of the algorithm were determined as: subsample is 0.5, learning rate is 0.001, maximum tree depth is 6 and boosting iteration is 10,000. The mean absolute error, root mean square error and mean absolute percentage error resulted in 0.024, 0.03 and 3.5, respectively, on average for the prediction of the hole-filling value, based on the printing speed and hole-diameter after optimisation. Our method is able to predict the hole-filling in pin-in-paste technology for different through-hole diameters.

No research works are available in current literature regarding machine learning techniques for pin-in-paste technology. Therefore, we decided to develop a method using decision tree learning techniques for supporting the design of the stencil printing process for through-hole components and pin-in-paste technology. The first pass yield of the assembly can be enhanced, and the reflow soldering failures of pin-in-paste technology can be significantly reduced.

This paper aims at studying the level of implementation of ISO 9001 in Jordanian consulting engineering firms and to what extent does the implementation effectiveness affect the success of the construction projects. Moreover, the paper seeks to identify the Critical Success Factors (CSFs) that directly influence the ISO 9001 effectiveness in Jordanian consulting engineering firms.

A questionnaire was constructed and distributed to a sample of 125 employees from six ISO 9001-consulting firms. After collecting the data, exploratory factor analysis was utilized to validate the latent constructs (CSFs, ISO 9001 Effectiveness, and Firm Performance).

The findings suggest that firms experience a high level of ISO 9001 effectiveness. Moreover, among the five identified CSFs; employee attributes, external environmental pressure and quality system attribute had a significant impact on the ISO 9001 effectiveness, while internal motivation and firm attributes were insignificant.

The significance of this study lies in exploring such topic in the developing countries, since most of current studies were focused on developed contexts such as the USA and UK. Therefore, this research acts as a response to calls in the current literature regarding considering different industries and contexts.

From two bodies of literature, the purpose of this paper is to generate theory for an updated conceptual model of drivers of Six Sigma project success by integrating extant psychology theory and empirical general team project results with a history of eight recent Six Sigma projects and extant Six Sigma literature. The new theory emphasizes the need for project leads to process information simultaneously, as well as develop prioritization abilities. Also, the new theory reverses the relations of three existing theories from general team composition theory. The new theory suggests that Six Sigma belt trainers should focus more on soft skill development.

A literature review of the two bodies of literature previously mentioned.

Eight new propositions related to the success of Six Sigma projects are developed. Further, two new constructs, “project leader simultaneity of thought” and “prioritization ability” are suggested for further investigation.

The authors suggest a few practical implications: first a greater emphasis on soft skill training would be beneficial in Six Sigma belt training. A second new point of emphasis in belt training is developing greater internal locus of control in belt candidates. Third, the authors suggest that during the team member selection process a diversity of backgrounds would be beneficial to Six Sigma project success.

This study aims to explore the barriers to implementation of ISO 9000 in China, and to identify how these barriers can be overcome.

Using a structural questionnaire survey, this paper examines the main barriers for enterprises in effective implementation of the ISO 9001 standard.

This paper highlights the problems in implementing the standard, which determines the sustainable implementation, including: short‐sighted goal for “getting certified”; over‐expectation on the ISO 9001 standard; mandatory requirement (not wholehearted commitment) in some industries; and following others (the trend) in certification. With regard to the effective audit of the ISO 9001 standard, the main problems were explored, including: lack of commitment from some certifying bodies; excessive competition between certifying bodies; and offering of a total packaged service from consultancy to certification by certifying bodies.

The ISO 9000 series have permeated into all industrial sectors. Although there are many stories of successful adoption of ISO 9001, problems in implementing the standards need to be explored, which may affect the sustainable implementation.

Based on the analysis, the paper proposes that the government should improve the legal framework and enforcement schemes to strengthen supervision and control for effective auditing of ISO 9000 standards.

By exploiting the relationships between Six Sigma and quality management systems (QMS) based on the ISO 9001 standard, this paper proposes a set of guidelines to combine and integrate both approaches in a systematic way. The guidelines are organised into integration topics, and each one is linked to the clauses of the ISO 9001 standard they refer to.

Based on the literature review, Six Sigma and QMS based on the ISO 9001 standard are thoroughly discussed and compared and beneficial synergies between them are identified. Based on this study, and to take advantage of the compatibilities and logical linkages between both approaches, guidelines for the integration of Six Sigma with the ISO 9001 requirements are developed.

Benefits resulting from the integration of Six Sigma with a QMS based on the ISO 9001 standard are mutual. The integration guidelines proposed in this paper provide a framework to unify process management practices, enhance the effectiveness of continual improvement efforts, facilitate the identification, evaluation and selection of Six Sigma projects, align the quality objectives defined for the QMS with Six Sigma project goals, establish relationships between the roles of a Six Sigma program and those inherent to an ISO 9001 QMS, and demonstrate how internal quality audits and management review benefit from a Six Sigma program.

The integration models and guidelines herein proposed can be further expanded to include other relevant normative references, particularly environmental management systems (ISO 14001) and safety and health management systems (OHSAS 18001).

The set of guidelines proposed in this paper is original and will be of practical value to the increasing number of organisations adopting a process‐model for the ISO 9001 standard, that seek to incorporate Six Sigma principles, practices, methods and tools within their QMS. The guidelines cover a wide spectrum of relevant activities that usually take place in the context of both initiatives. In addition, because each guideline is accompanied by the identification of the applicable clauses of ISO 9001, they provide a useful framework to develop, implement, maintain, and improve a QMS in parallel with a Six Sigma program.

Most of the total quality management (TQM) programmes implemented in the printing industry fail to produce the intended benefit, because of the view that quality achievement is workers responsibility. The purpose of this paper is to examine the role management plays in the implementation of TQM programme in the Ghanaian printing firms.

The study employed mixed method in gathering relevant data. A cross-sectional survey questionnaire was given to 145 managers of registered members of Ghana Printers and Paper Converters Association, Southern Sector to assess the role management plays in TQM programme. Key informant interview was conducted among ten randomly selected production managers of printing firms to complement the survey data.

The study finds out that organizational performance (OP) is not significantly influenced by the level of commitment of top management in a printing organization. Rather OP is greatly influenced and determined by leadership styles of management and the quality policy which guides printing operations.

The Ghanaian printing industry can ensure better OP by considering the kind of leadership style exhibited in the firm and develop quality policy to guides printing operations and activities. No matter the level of commitment of organizational resources, if it is not back by a good leadership style and a quality policy, TQM initiative will not yield the intended result.

The study presents managerial issues and practices critical for successful TQM programme in the Ghanaian printing industry.