Search results

The objective of this work was to use the spinning waste in form of short fibres for the preparation of nano size fillers in nanocomposite applications. The present paper concerns with the jute fibres as the source to produce nanocellulose by high energy planetary ball milling process and its potential applications as fillers in biodegradable nanocomposite plastics used in automotives, packaging and agriculture applications. Influence of various milling conditions like nature of milling (i.e. dry or wet), milling time and ball size are studied on the particle size distribution and morphology of jute nanoparticles obtained. Wet milling in the deionised water resulted into particle size refinement below 500 nm with narrow size distribution after 3 hours of milling at the cost of small amount of contaminations introduced from milling media.

Noise is an unwanted sound which creates the pollution and adverse effects on individual. One of the simple ways to reduce the noise is to place the acoustic material in the path between the source and the receiver so that sound waves get either absorbed or blocked while reaching towards the receiver. There are various techniques available to measure sound absorption or sound barrier (blocking) caused by the acoustic material. However these techniques are also associated with certain limitations. Our objective was to design and fabricate simple technique to measure sound barrier which overcomes these limitations and allows larger sample size and random scatter of sound wave to accurately predict actual field measurements. A sound source (i.e. a speaker) and a microphone, placed in different pipes separated by sample in between, were used for the measurement of sound barrier property of porous materials (nonwovens, woven fabric, and foam), nonporous materials (rubber, cardboard) and their composite structures at four different frequencies 250 Hz, 500 Hz, 1,000 Hz, and 2000 Hz. Different set of readings were taken in absence and presence of the sample by measuring the transmitted sound across the sample.

The purpose of this article is the effect of doping minor Ni on the microstructure evolution of a Sn-xNi (x = 0, 0.05 and 0.1 wt.%)/Ni (Poly-crystal/Single-crystal abbreviated as PC Ni/SC Ni) solder joint during reflow and aging treatment. Results showed that the intermetallic compounds (IMCs) of the interfacial layer of Sn-xNi/PC Ni joints were Ni₃Sn₄ phase, while the IMCs of Sn-xNi/SC Ni joints were NiSn₄ phase. After the reflow process and thermal aging of different joints, the growth behavior of interfacial layer was different due to the different mechanism of element diffusion of the two substrates. The PC Ni substrate mainly provided Ni atoms through grain boundary diffusion. The Ni₃Sn₄ phase of the Sn0.05Ni/PC Ni joint was finer, and the diffusion flux of Sn and Ni elements increased, so the Ni₃Sn₄ layer of this joint was the thickest. The SC Ni substrate mainly provided Ni atoms through the lattice diffusion. The Sn0.1Ni/SC Ni joint increases the number of Ni atoms at the interface due to the doping of 0.1Ni (wt.%) elements, so the joint had the thickest NiSn₄ layer.

The effects of doping minor Ni on the microstructure evolution of an Sn-xNi (x = 0, 0.05 and 0.1 Wt.%)/Ni (Poly-crystal/Single-crystal abbreviated as PC Ni/SC Ni) solder joint during reflow and aging treatment was investigated in this study.

Results showed that the intermetallic compounds (IMCs) of the interfacial layer of Sn-xNi/PC Ni joints were Ni₃Sn₄ phase, while the IMCs of Sn-xNi/SC Ni joints were NiSn₄ phase. After the reflow process and thermal aging of different joints, the growth behavior of the interfacial layer was different due to the different mechanisms of element diffusion of the two substrates.

In this study, the effect of doping Ni on the growth and formation mechanism of IMCs of the Sn-xNi/Ni (single-crystal) solder joints (x = 0, 0.05 and 0.1 Wt.%) was investigated.

This study aims to develop multifunctional, namely, superhydrophobic, flame-retardant and antibacterial, coatings over cotton fabric, using casein as green-based flame-retardant and silver nanoparticles as antibacterial agent by solution immersion method.

The cotton fabric is first coated with casein to make it flame-retardant. AgNPs synthesized using Cinnamomum zeylanicum bark extract is coated over the casein layer. Finally, stearic acid is used to coat the cotton to make it superhydrophobic. X-ray diffraction, transmission electron microscopy analysis and ultraviolet-visible spectroscopy are used to investigate the produced AgNPs. The as-prepared multifunctional cotton is characterized by scanning electron microscopy, energy dispersive X-ray analysis and attenuated total reflection-infrared studies. Flame test, limiting oxygen index test and thermogravimetric analyzer studies have also been performed to study the flame-retardant ability and thermal stability of treated fabric, respectively. The antibacterial effect of the coatings is evaluated by disc-diffusion technique. Water contact angle is determined to confirm the superhydrophobic nature of cotton fabric.

The outcomes of this study showed that the prepared multifunctional cotton fabric had maximum contact angle of greater than 150° with good flame retardancy, high thermal stability, greater washing durability and high antibacterial activity against the growth of Pseudomonas aeruginosa and Acinetobacter indicus. Additionally, the as-prepared superhydrophobic cotton showed an excellent oil–water separation efficiency.

The trilayered multifunctional cotton fabric has limiting washing durability up to 20 washing cycles. Treated functional fabric can be used as an antibacterial, therapeutic, water repellent and experimental protective clothing for medical, health care, home curtains and industrial and laboratory purposes.

The study brings out the robustness of this method in the development of multifunctional cotton fabrics.

In the recent years, the industries show interest in natural and synthetic fibre-reinforced hybrid composites due to weight reduction and environmental reasons. The purpose of this experimental study is to investigate the properties of the hybrid composites fabricated by using carbon, untreated and alkaline-treated hemp fibres.

The composites were tested for strengths under tensile, flexural, impact and shear loadings, and the water absorption characteristics were also observed. The finite element analysis (FEA) was carried out to analyse the elastic behaviour of the composites and predict the strength by using ANSYS 15.0.

From the experimental results, it is observed that the hybrid composites can withstand the maximum tensile strength of 61.4 MPa, flexural strength of 122.4 MPa, impact strength of 4.2 J/mm² and shear strength of 25.5 MPa. From the FEA results, it is found that the maximum stress during tensile, flexural and impact loading is 47.5, 2.1 and 1.03 MPa, respectively.

The results of the untreated and alkaline-treated hemp-carbon fibre composites were compared and found that the alkaline-treated composites perform better in terms of mechanical properties. Then, the ANSYS-predicted values were compared with the experimental results, and it was found that there is a high correlation occurs between the untreated and alkali-treated hemp-carbon fibre composites. The internal structure of the broken surfaces of the composite samples was analysed using a scanning electron microscopy (SEM) analysis.

Understanding of quick commerce (q-commerce) and its relevance in modern retail.

Analysis of market entry strategies and competitive landscapes.

Insights into operational challenges and solutions in rapid delivery services.

Exploration of consumer behavior shifts and business adaptation in response to global events.

The case examines Zepto’s innovative approach in the quick commerce sector, emphasizing its strategies, challenges and the impact of the pandemic on its operations and growth.

This case study is suitable for undergraduate-level students, particularly in courses related to business management, e-commerce, marketing and supply chain management.

Teaching notes are available for educators only.

CSS 11: Strategy.

The construction industries at present are focusing on designing sustainable concrete with less carbon footprint. Considering this aspect, a Fibre-Reinforced Geopolymer Concrete (FGC) was developed with 8 and 10 molarities (M). At elevated temperatures, concrete experiences deterioration of its mechanical properties which is in some cases associated with spalling, leading to the building collapse.

In this study, six geopolymer-based mix proportions are prepared with crimped steel fibre (SF), polypropylene fibre (PF), basalt fibre (BF), a hybrid mixture consisting of (SF + PF), a hybrid mixture with (SF + BF), and a reference specimen (without fibres). After temperature exposure, ultrasonic pulse velocity, physical characteristics of damaged concrete, loss of compressive strength (CS), split tensile strength (TS), and flexural strength (FS) of concrete are assessed. A polynomial relationship is developed between residual strength properties of concrete, and it showed a good agreement.

The test results concluded that concrete with BF showed a lower loss in CS after 925 °C (i.e. 60 min of heating) temperature exposure. In the case of TS, and FS, the concrete with SF had lesser loss in strength. After 986 °C and 1029 °C exposure, concrete with the hybrid combination (SF + BF) showed lower strength deterioration in CS, TS, and FS as compared to concrete with PF and SF + PF. The rate of reduction in strength is similar to that of GC-BF in CS, GC-SF in TS and FS.

Performance evaluation under fire exposure is necessary for FGC. In this study, we provided the mechanical behaviour and physical properties of SF, PF, and BF-based geopolymer concrete exposed to high temperatures, which were evaluated according to ISO standards. In addition, micro-structural behaviour and linear polynomials are observed.

Recently, composites have concerned considerable importance as a potential operational material. Lots of work have been carried out to enhance the mechanical properties of composites. The main aim of this paper is to develop bamboo mat as reinforcing material with bagasse fiber as filler using epoxy resin matrix composite.

In this research, the effect of fiber surface treatments on mechanical properties of epoxy resin composite with bagasse as filler has been developed and investigated. The extracted bamboo fibers were treated with NaOH to improve the surface roughness fiber. Using treated and untreated bamboo fiber handwoven mat has been produced to be used as reinforcement and bagasse fiber has been converted into powder to be filled as filler. Composite material is fabricated using bamboo fiber and bagasse fiber as filler with epoxy resin as a matrix using hand layup technique.

Then, tensile, flexural and compressive strength and water absorption tests were conducted on sodium hydroxide treated and untreated fiber composites. The test results comparing with and without alkali treated composites show that there was significant change in their strength and water absorption properties on alkali treated fiber.

This study is an original research paper.

A study on the mechanical characteristics of cementitious mortar reinforced with basalt fibres at ambient and elevated temperatures was carried out. To investigate their effect, chopped basalt fibres with varying percentages were added to the cement mortar.

All the specimens were heated using a muffle furnace. Flexural strength and Compressive strength tests were performed, while monitoring the moisture loss to evaluate the performance of basalt fibre reinforced cementitious mortars at elevated temperatures.

From the study, it is clear that basalt fibres can be used to reinforce mortar as the fibres remain unaffected up to 500 °C. Minimal increases in flexural strengths and compressive strengths were measured with the addition of basalt fibres at both ambient and elevated temperatures. SEM pictures revealed fibre matrix interaction/degradation at different temperatures.

The current study shows the potential of basalt fibre addition in mortar as a reinforcement mechanism at elevated temperatures and provides experimental quantifiable mechanical performances of different fibre percentage addition.

This study aims to identify the major factors influencing the consumers to prefer milk products and also to analyze the awareness level of the Indian consumers.

In this study, the data is obtained through a structured questionnaire from Indian consumers considering convenience sampling under the nonprobability sampling technique. The consumer preference is explained using a multiple-regression model followed by analysis of variance (ANOVA), which shed insight on the significant differences between the variables that influence consumer preference for dairy products.

Investigation is done to analyze the factors influencing the consumers' buying behavior toward milk and its products. The results showed that quality, health consciousness, price and availability are the most influencing factors to buy milk products. Quantity of milk showed a significant relationship between age, monthly income and family size.

This study helps marketing managers to frame the marketing strategies based on consumer preference, quality, health consciousness, price and availability. The research outcome will not only be advantageous for the entrepreneurial perspective but also takes care of consumer likeliness. Though the research reveals the opinion of Indian consumers, it limits the likeliness of the western world. Because of the scarcity of resources, several dairy products are unexplored, which could pave the future scope of research.

The novelty of this study is to identify the quality, health consciousness, price and availability are the most influencing factors to buy milk products considering ANOVA and the multiple regression model.