This paper presents the numerical examination of wind pressure distributions on U-plan shaped buildings having four different depth ratios (DR) as 0.5, 1, 2 and 4 over wind…
Abstract
Purpose
This paper presents the numerical examination of wind pressure distributions on U-plan shaped buildings having four different depth ratios (DR) as 0.5, 1, 2 and 4 over wind incidence angle (WIA) of 0°. The purpose of this study is to investigate the effect of irregular building form, DRs, distances from the reentrant corner, wind velocity values on and around wind pressure distributions of the buildings. With this aim, ANSYS Fluent 20.0 Computational Fluid Dynamics (CFD) program is used for the analysis.
Design/methodology/approach
Four U-shaped buildings having the same height, width and wing length but having different DR in plan were analyzed by the application of CFD package of ANSYS 20. With this purpose, wind pressure distributions on and around U-plan shaped buildings were analyzed for the wind velocity values of 2 and 5 m/s over WIA of 0°. Comprehensive results were obtained from the analyses.
Findings
While the change in the DR values did not create a significant change in positive pressure coefficients on A and E surfaces, negative pressure values increased as the DR decreased. The negative pressure coefficients observed on the A and E surfaces become higher than the positive pressure coefficients with the decrease in the DR. On contrary to that condition, with the decrease in the DR, G surfaces take higher positive pressure coefficients than the negative pressure coefficients. The reason for this is that the DR decreases and negative pressure values on G surface significantly decrease. The effect of the DR on the pressure coefficients is remarkable on B and D surfaces. The negative pressure coefficients on the B and D surfaces tend to increase as the DR decreases.
Research limitations/implications
This study focused on DRs and wind velocity values effect on pressure coefficients to limit variables. Different building wing dimensions did not take into account.
Originality/value
Although there are a number of studies related to wind behavior of irregular plan shaped buildings, irregular building forms have not been extensively investigated parametrically, especially in terms of the effect of DR on wind pressures. This study is therefore designed to fill this gap by analyzing impacts of various parameters like building shape with various DRs, WIA and wind velocity values on wind pressure distributions and velocity distributions on and around the building.
Details
Keywords
The purpose of this research is to show significant points which can be used in the architectural design process by investigating the basic principles of earthquake resistant…
Abstract
Purpose
The purpose of this research is to show significant points which can be used in the architectural design process by investigating the basic principles of earthquake resistant design (ERD) in a deductive format and to contribute to the architectural perception in ERD.
Design/methodology/approach
First, the structural irregularity types are examined depending on the rules defined in the Turkish Earthquake Code, 2007 (TEC). Then, architectural design failures related to earthquake resistance of buildings under earthquake loading are visualized and solution suggestions in literature are described in detail by supported drawings.
Findings
The problems causing structural irregularities are investigated deeply with given solutions in literature. It is obtained that the significant factors affecting the earthquake performance of structures are: architectural form, structural configuration, slenderness ratio, the location and rate of floor openings, projection rates and symmetry, rigidity and strength differences between floors, short columns, pounding effect. Social implications – The practical design decision rules can contribute to the phenomena of earthquake resistant architectural design and can encourage adoption of these rules in building industry.
Originality/value
This study aims to gain an understanding of the problems in projects in terms of structural irregularities, and then manage to solve the problems using problem‐oriented approaches. The suggested solutions can be adopted and applied to future projects for designing earthquake resistant buildings.
Details
Keywords
The purpose of this research is to investigate natural illumination properties of one of the classrooms in the School of Architecture at Izmir Institute of Technology, located in…
Abstract
Purpose
The purpose of this research is to investigate natural illumination properties of one of the classrooms in the School of Architecture at Izmir Institute of Technology, located in Turkey, which is the northern hemisphere.
Design/methodology/approach
In this study, the definitions of the basic terms in daylighting, such as daylight factor, illuminance, glazing ratio, are given first. Then, a luxmeter and a lighting simulation software, Velux, are used in order to calculate variable lighting factors during daytime, at different storeys, at different directions, for the classes. Velux is a proprietary software and it enables natural lighting analysis practically.
Findings
Chosen classrooms are examined regarding their having sufficient natural illumination. The height of windows from the floor is changed, and the resultant effects on natural lighting in the classrooms are determined by using the lighting simulation program, Velux. The study shows that daylight factor and illumination near the window decreases as the height of the window above the floor increases. However, the illumination increases away from the window, giving greater uniformity to the lighting. At the same time, the usable depth of the classroom increases. The tall and narrow windows bring the daylight near themselves.
Social implications
Practical window design decisions can help architects to provide effective and healthy natural lighting for interiors.
Originality/value
Adjustment of the dimensions of the windows is important in order to balance the energy consumption of buildings. This study investigates natural lighting depending on both experimental measurements and simulation software, Velux.