Search results

The purpose of this study was to produce yarns from three different spinning techniques, i.e.Murata Vortex Spinning (MVS) ring spinning and rotor spinning. Those yarns were then used to produce fabrics. Then, the effect of silicone softener on tactile comfort of fabric was investigated.

Three different yarns, i.e. Ring, Rotor and MVS yarns, were used to make fabrics using CCI sample loom which were then subjected to post treatments like desizing, scouring and bleaching. After the completion of the dyeing process, silicone-based softener was used to improve the hand feel of fabrics. The structures of three yarns were evaluated using Scanning electron microscopy. The fabrics were evaluated against compression, bending and surface properties using Kawabata evaluation system.

The fabric made of MVS yarn depicted more geometrical roughness, coefficient of friction and bending rigidity but less compressibility as compared to fabrics made with other yarns. It was observed that softener concentration has a direct relationship with thickness and bending rigidity of the fabric, and inverse relationship with coefficient of friction and geometrical roughness of the fabric.

MVS yarn has some superior properties over rotor and ring spun yarn like high production rates, high resistance to pilling, clear appearance and stability against deformation but has disadvantage that it has less compressibility. Therefore, softener is applied on the fabric, to address this issue, so that it could also be used for apparels application.

This study aims to evaluate the dyeing of the p-aramid fibre with cationic dyes and investigate the effect of dyeing in the protection of the fibre from ultraviolet (UV) light.

P-aramid fabric has been dyed with cationic dyes using benzyl alcohol as swelling agent to promote the penetration of dye molecules into the fibre. The fabrics were evaluated against colour strength (K/S) value and colour fastness properties after dyed with cationic dyes using full factorial design. This design was used to study the effect of factors that affect the response variables as well as to study the interactions among the factors on response variable. The bursting strength, scanning electron microscopy analysis and X-ray diffraction analysis of undyed and dyed p-aramid fabric were performed before and after exposure to UV light to investigate the changes in mechanical behaviour.

The results show that the p-aramid fabric dyed with cationic dyes has good K/S values and good fastness properties. The exposure of undyed p-aramid fabric to UV light causes serious loss in strength over short duration i.e. 40 h. Dyeing of p-aramid fabric enhances the resistance to UV light which reduces the loss in strength.

Most of the work is patented and no one has done the process optimization for the industry, so this study offers promising outcomes concerning the dyeing of p-aramid fabric with enhanced shade depth and good colour fastness characteristics.

The post-COVID-19 scenario has presented significant learning challenges for university students worldwide. The swift shift from face-to-face to online classes posed greater difficulties because students were not mentally, financially, or physically prepared for this change, nor were they provided with adequate training to operate the learning management system (LMS). Online learning necessitates a school-like environment at home, which is challenging for students to replicate. This study aimed to determine the effect of online learning on students’ academic achievement and to explore the challenges they faced in adapting to this new mode of learning. A quantitative research approach was employed, gathering primary data from 230 respondents in the Faculty of Social Sciences at the National University of Modern Languages, Islamabad. This was done using a validated closed-ended questionnaire featuring a five-point Likert scale. The collected data underwent analysis via the Friedman test using SPSS 20v. The results revealed that online learning negatively impacted students’ academic achievement due to factors such as lack of internet accessibility, decreased motivation towards academics, low satisfaction levels, and difficulties in understanding academic concepts, particularly in the natural sciences. The study recommends a focus on implementing new teaching methods such as reciprocal teaching, digitalizing classrooms, offering remedial classes, and enhancing student motivation through teacher engagement.

This study aims to investigate the mediating effect of innovation on the relationship between KM (KM) capabilities and organisational performance in the context of construction firms operating in Pakistan. Worldwide innovation predicts the performance of any firm. Today, the construction industry in Pakistan is booming, which reinforces the need for a study on innovation and KM in this sector.

This empirical study uses a correlational research design. An online survey questionnaire was used as a data collection method. Through convenient sampling, the sample comprised 277 employees from different construction firms working under the Defence Housing Authority (a construction company operating in major cities) in Pakistan. Data were analysed through partial least squares-structural equation modelling (Smart PLS-SEM version 3) to assess the hypothesis.

Data analysis reveals that KM dimensions, knowledge acquisition, application and protection positively and significantly influence organisational performance; however, knowledge conversion is insignificant. Furthermore, innovation positively and substantially mediates the relationship between knowledge acquisition, application, protection, organisational performance and the insignificant terms of knowledge conversion.

This study is limited to the construction industry, and future research should be conducted on larger scales for better generalisation. Other mediators between KM and organisational performance (i.e. organisational complexity, workplace environment, employee knowledge-sharing attitude) should be investigated.

These results are crucial and encourage managers in the construction industry, especially from a developing country like Pakistan, to understand the importance of innovation, the application of KM and the essential role it has in boosting business performance.

This research contributes to the scholarly debate on the mediating role of innovation in the relationship between KM and organisational performance. It also expands the literature on KM through an empirical investigation on the innovation of the construction industry in Pakistan from a management perspective.

Research on adopting leadership style like ambidextrous leadership to enhance employees' innovative work behavior (IWB) is in an initial stage. Moreover, employees need a high knowledge sharing attitude to show more IWB. The purpose of this study is to empirically test the impact of ambidextrous leadership on IWB with the mediating role of knowledge sharing and the moderating role of innovativeness as a project requirement (IAPR).

The simple random sampling technique was used to collect data from 542 employees of project-based construction companies operating in Pakistan. Smart partial least squares-structural equation modeling (Smart PLS SEM v.3.2.8) was used to test the hypotheses.

The result revealed that ambidextrous leadership has a significant and positive effect on knowledge sharing but negative effect on IWB at the workplace. Additionally, the mediating role of knowledge sharing has been tested and proved to be a potential mediator between ambidextrous leadership and IWB. Also, IAPR as moderator has a significant and positive effect on knowledge sharing and IWB.

The managers need to develop an ambidexterity-oriented strategy and communicate this strategy across the members of the whole organization. These processes can be facilitated by ambidextrous leaders with complex behavioral repertoires and specific constellations and characteristics of top management teams.

The relationship between ambidextrous leadership and IWB is the new contribution through the mediating of knowledge sharing between AL and IWB also moderation role IWB between knowledge sharing and IWB.

Open banking, with its promise to revolutionise electronic transactions through open application programming interfaces (APIs), aims to bridge the gap between banks and non-banks, enhancing lending, payments, investments and funds distribution. However, does this bold innovation truly resonate with consumers? This study delves into consumer intentions to adopt open banking in Indonesia by leveraging the technology readiness model, scrutinising its antecedents and moderating factors, and identifying the key attributes that users anticipate.

Through quantitative and qualitative approaches, this study answers the following questions: (1) Are financial service users ready to use open banking/open API applications? (2) What are the key attributes that consumer expects of open banking/open API? First, the authors developed a structural model based on the technology readiness model, distributed the questionnaire in eight major cities in Indonesia, analysed it using PLS-SEM and utilised a machine learning approach to unpack the main attributes expected from open banking.

This study’s findings indicate that customers are generally prepared to embrace open banking innovations. Nonetheless, to enhance public acceptance, certain factors should be emphasised, including organisational support, user-friendly technology, a comprehensive range of features, consumer financial literacy and banks' readiness to adopt open banking. In contrast to prior research, this study reveals that loyalty to traditional banking positively moderates the connection between customer value and the intention to utilise open banking. Additionally, the authors did not observe a significant moderating effect of financial literacy on the relationship between perceived customer value and the intention to use open banking.

To the best of the authors’ knowledge, this study is one of the few that comprehensively analyses the consumers' readiness for open banking in developing contexts. This study is expected to produce a theoretical contribution as well as effective and optimal policies for the financial services sector.

The purpose of the study is to develop a macroeconometric model for evaluation of trade policies and forecasting of trade performance of Pakistan with different regions or group of countries.

These regions or group of countries are Organization of Islamic Cooperation, Organization of Economic Cooperation and Development, Association of Southeast Asian Nations, South Asian Association for Regional Cooperation and the rest of the world. A macroeconometric model containing 15 behavioral equations and eight identities.

Cointegration results suggest that there exist long-run relationships among variables of all behavioral equations. Additionally, results of different policy shocks based on unit value of export (export price), unit value of import (import price), exchange rate, foreign direct investment, interest rate and foreign exchange reserve suggest that the model is useful for economic planning to sustain growth performance of Pakistan.

In this study, the authors develop for the first time ever a macroeconometric model for the evaluation and forecasting of regional trade policy and performance for Pakistan.

By combining relevant literature and using quantitative methodology, this study aims to look into the role of knowledge management (KM) as a mediator between entrepreneurial competencies (ECs) and the sustainable performance (SP) of manufacturing small and medium-sized enterprises (SMEs).

The relationships in the proposed model were examined with data collected from 122 Malaysian SMEs using a cross-sectional technique and a standardized questionnaire and analyzed using structural equation modeling path analysis.

According to the findings, ECs have a positive and considerable impact on KM as well as the SP of manufacturing SMEs. Importantly, KM partially mediates between ECs and the SP of manufacturing SMEs.

This research provides a theoretical contribution through the integration of ECs, KM and SP within a unified framework that takes into account the viewpoints of the resource-based view, the knowledge-based view and the triple bottom line. The results corroborate that ECs directly affect SP and indirectly through KM. Nevertheless, the study’s use of cross-sectional survey data makes it impossible to draw conclusions about causes. This is because ECs, KM and SP all have effects on time that this empirical framework cannot account for.

The findings of this research provide valuable insights for managers and decision-makers in SMEs, who are expected to show an increasing interest in adopting KM processes into their companies through which ECs can be translated into SP.

By applying the proposed framework, SMEs can conduct their activities in ways that do not harm environmental and societal well-being while achieving appropriate economic performance at the same time.

As a result, the findings of this study can add to the literature on ECs and KM, as well as boost the chances of SME sustainability. Directions for future research are also provided in relation to a better understanding of the factors affecting the SP of SMEs.

The study aims to investigate the relationship between transformational, transactional leadership and employee retention with the mediating effect of employee engagement.

Using judgemental sampling, data were collected from 650 employees serving at different levels in the pharmaceutical industry of Bangladesh. Structural equation modeling was employed to test the hypothesized relationships using AMOS.

The study found that transformational and transactional leadership significantly impact employee retention. The direct effects of transformational leadership (TFL) on employee engagement were found to be significant, while transactional leadership (TSL) has no significant direct influence on employee engagement. The output of the mediation analysis revealed that employee engagement significantly mediates the relationship between TFL and employee retention, whereas it showed an insignificant relationship between TSL and employee retention.

Based on the findings and the literature support, it can be postulated that an appropriate leadership style, especially TFL, that drives employee engagement can influence employees to stay with the organization longer. The study recommends that managers and leaders comprehend the importance of leadership and its appropriateness to retain valued employees by ensuring high workplace engagement.

The study would provide a unique insight into TFL and TSL practices and their impact on the pharmaceutical industry’s employee retention. This study also extends the research on employee engagement as a mediator between TFL and TSL and employee retention.