Search results

Twin-wire welding-based additive manufacturing (TWAM) is a unique process which uses gas metal arc welding (GMAW)-based twin-wire weld-deposition to create functionally gradient materials (FGMs). Presented study aims to focus on creating metallic objects with a hardness gradient using GMAW of twin-wire weld deposition setup.

By using dissimilar filler wires in twin-wire weld-deposition, it is possible to create metallic objects with varying hardness. This is made possible by individually controlling the proportion of each filler wire used. ER70S-6 and ER110S-G are the two filler wires used for the study; the former has lower hardness than the latter. In the current study, methodology and various experiments carried out to identify the suitable process parameters at a given location for a desired variation of hardness have been presented. A predictive model for obtaining the wire speed of the filler wires required for a desired value of hardness was also created. Subsequently, sample parts with gradient in various directions have been fabricated.

For dissimilar twin-wire weld-deposition used here, it is observed that the resultant hardness is in the volumetric proportion of the hardness of the individual filler wires. This aids the fabrication of FGMs using arc based weld-deposition with localized control of hardness, achieved through the control of the ratio of wire speeds of the individual filler wires. Four sample parts were fabricated to demonstrate the concept of realizing FGMs through TWAM. The fabricated parts showed good match with the desired hardness variation.

This paper successfully presents the capability of TWAM for creating gradient metallic objects with varying hardness. Although developed using ER70S-6 and ER110S-G filler wire combination, the methodology can be extended for other filler wire combinations too for creating FGMs

GMAW-based twin-wire welding for additive manufacturing is a novel process which uses dissimilar filler wires for creating FGMs. This paper describes methodology of the same followed by illustration of parts created with bi-directional hardness gradient.

Amongst various additive manufacturing (AM) techniques for realizing the complex metallic objects, weld-deposition (arc)-based directed energy AM technique is attaining more focus over commercially available powder bed fusion techniques. This is because of the capability of high deposition rates, high power and material utilization, simpler setup and less initial investment of arc-based AM. Nevertheless, realization of sudden overhanging features through arc-based weld-deposition techniques is still a challenging task because of the necessity of support structures. This paper aims to describe a novel methodology for producing complex metallic objects with sudden overhangs without using supports.

The realization of complex metallic objects with sudden overhangs (without using supports) is possible by reorienting the workpiece and/or deposition head at every instance using higher order kinematics (5-axis setup) to make sure the overhanging feature is in line to the deposition direction.

In the absence of universally applicable support mechanism, deposition of overhanging features remains one of the main challenges in AM. A separate support structure is often necessary for depositing the overhanging features. Small overhang features are usually possible by a little overextension from the previous layer. Nevertheless, deposition of large gradually varying overhangs and sudden overhangs with complex features without support structures is a challenging task in any AM process. This demands higher order kinematics which calls for inclined and/or orthogonal slicing and area filling.

The unique aspect of this paper is the identification of sudden overhang feature from a tessellated computer-aided design (.stl) file and generates an orthogonal tool path for deposition for sudden overhangs. An in-house MATLAB routine has been developed and presented for performing the same. This methodology helps in realization of sudden overhangs without use of supports. To validate proposed technique, various illustrative case studies have been taken up for deposition.

The use of a gas metal arc welding-based weld-deposition, referred to as wire-direct energy deposition or wire-arc additive manufacturing, is one of the notable additive manufacturing methods for producing metallic components at high deposition rates. In this method, the near-net shape is manufactured through layer-by-layer weld-deposition on a substrate. However, as a result of this sequential weld-deposition, different layers are subjected to different types of thermal cycles and partial re-melting. The resulting microstructural evolution of the material may not be uniform. Hence, the purpose of this study is to assess microstructure variation along with the lamination direction (or build direction).

The study was carried out for two different boundary conditions, namely, isolated condition and cooled condition. The microstructural evolution across the layers is hypothesized based on experimental assessment; this included microhardness, scanning electron microscopy imaging and electron backscatter diffraction analysis. These conditions subsequently collaborated with the help of thermal modeling of the process.

During a new layer deposition, the previous layer also is subject to re-melt. While the newly added layer undergoes rapid cooling through a combination of convection, conduction and radiation losses, the penultimate layer, sees a slower cooling curve due to its smaller exposure area. This behavior of rapid-solidification and subsequent re-melting and re-solidification is a progressing phenomenon across the layers and the bulk of the layers have uniform grains due to this remelt-re-solidification phenomenon.

This paper studies the microstructure variation along with the build direction for thin-walled components fabricated through weld-deposition. This study would be helpful in addressing the issue of anisotropy resulting from the distinctive thermal history of each layer in the overall theme of metal additive manufacturing.

The unique aspect of this paper is the postulation of a generic hypothesis, based on experimental findings and supported by thermal modeling of the process, for remelt-re-solidification phenomenon followed by temperature raising/lowering repetitively in every layer deposition across the layers. This is implemented for different types of base plate conditions, revealing the role of boundary conditions on the microstructure evolution.

This study aims to improve the mechanical properties of an object produced by fused deposition modelling with high-grade polymer.

The study uses an ensembled surrogate-assisted evolutionary algorithm (SAEA) to optimize the process parameters for example, layer height, print speed, print direction and nozzle temperature for enhancing the mechanical properties of temperature-sensitive high-grade polymer poly-ether-ether-ketone (PEEK) in fused deposition modelling (FDM) 3D printing while considering print time as one of the important parameter. These models are integrated with an evolutionary algorithm to efficiently explore parameter space. The optimized parameters from the SAEA approach are compared with those obtained using the Gray Relational Analysis (GRA) Taguchi method serving as a benchmark. Later, the study also highlights the significant role of print direction in optimizing the mechanical properties of FDM 3D printed PEEK.

With the use of ensemble learning-based SAEA, one can successfully maximize the ultimate stress and percentage elongation with minimum print time. SAEA-based solution has 28.86% higher ultimate stress, 66.95% lower percentage of elongation and 7.14% lower print time in comparison to the benchmark result (GRA Taguchi method). Also, the results from the experimental investigation indicate that the print direction has a greater role in deciding the optimum value of mechanical properties for FDM 3D printed high-grade thermoplastic PEEK polymer.

This study is valid for the parameter ranges, which are defined to conduct the experimentation.

This study has been conducted on the basis of taking only a few important process parameters as per the literatures and available scope of the study; however, there are many other parameters, e.g. wall thickness, road width, print orientation, fill pattern, roller speed, retraction, etc. which can be included to make a more comprehensive investigation and accuracy of the results for practical implementation.

This study deploys a novel meta-model-based optimization approach for enhancing the mechanical properties of high-grade thermoplastic polymers, which is rarely available in the published literature in the research domain.

This paper aims to develop build strategies for rapid manufacturing of components of varying complexity with the help of illustration.

The build strategies are developed using a hybrid layered manufacturing (HLM) setup. HLM, an automatic layered manufacturing process for metallic objects, combines the best features of two well-known and economical processes, viz., arc weld-deposition and milling. Depending on the geometric complexity of the object, the deposition and/or finish machining may involve fixed (3-axis) or variable axis (5-axis) kinematics.

Fixed axis (3-axis) kinematics is sufficient to produce components free of undercuts and overhanging features. Manufacture of components with undercuts can be categorized into three methods, viz., those that exploit the inherent overhanging ability, those that involve blinding of the undercuts in the material deposition stage and those that involve variable axis kinematics for aligning the overhang with the deposition direction.

Although developed using the HLM setup, these generic concepts can be used in a variety of metal deposition processes.

This paper describes the methodology for realizing undercut features of varying complexity and also chalks out the procedure for their manufacture with the help of case studies for each approach.

The purpose of this paper is to develop a build strategy for inclined thin-walled parts by exploiting the inherent overhanging capability of the cold metal transfer (CMT) process, which release wire-arc additive manufacturing from tedious programming work and restriction of producible size of parts.

Inclined thin-walled parts were fabricated with vertically placed welding torch free from any auxiliary equipment. The inclined features were defined and analyzed based on the geometrical model of inclined parts. A statistical prediction model was developed to describe the dependence of inclined geometrical features on process variables. Based on these models, a build strategy was proposed to plan tool path and output process parameters. After that, the flow work was illustrated by fabricating a vase part.

The formation mechanism and regulation of inclined geometrical features were revealed by conducting experimental trials. The inclined angle can be significantly increased along with the travel speed and offset distance, whereas the wall width is mainly dependent on the ratio of wire feed speed to travel speed. In contrast to other welding process, CMT has a stronger overhanging capability, which provides the possibility to fabricate parts with large overhanging features directly with high forming accuracy.

This paper describes a novel build strategy for inclined thin-walled parts free from any auxiliary equipment. With the proposed strategy, a complex structural component can be deposited directly in the rectangular coordinates additive manufacturing system, indicating infinite possibilities on the producible size of the parts. Moreover, equipment requirements and tedious program work can also be significantly reduced.

This review paper aims to provide an overview of applications of direct rapid manufacturing assisted mold with conformal cooling channels (CCCs) and shows the potential of this technique in different manufacturing processes.

Key publications from the past two decades have been reviewed.

This study concludes that direct rapid manufacturing technique plays a dominant role in the manufacturing of mold with complicated CCC structure which helps to improve the quality of final part and productivity. The outcome based on literature review and case study strongly suggested that in the near future direct rapid manufacturing method might become standard procedure in various manufacturing processes for fabrication of complex CCCs in the mold.

Advanced techniques such as computer-aided design, computer-aided engineering simulation and direct rapid manufacturing made it possible to easily fabricate the effective CCC in the mold in various manufacturing processes.

This paper is beneficial to study the direct rapid manufacturing technique for development of the mold with CCC and its applications in different manufacturing processes.