Mahdi Dahmardeh and Sung-Do Kim
The aim of this article was to understand about cultural representation in these coursebooks and if it is reflected the status of English as a lingua franca.
Abstract
Purpose
The aim of this article was to understand about cultural representation in these coursebooks and if it is reflected the status of English as a lingua franca.
Design/methodology/approach
This article is a report on a case study in the form of content analysis of different categories of culture represented in English language coursebooks used in schools of Iran. In order to do so, references to source, target, international and universal cultures were classified into four aspects: perspectives, products, practices and persons.
Findings
Generally, the findings suggested that despite the high frequency of cultural elements, the representation favoured the source culture, while the target, international and universal cultures were heavily under-represented.
Research limitations/implications
Apart from the valuable contributions of the study, the implications of the study are that despite the high frequency of cultural elements, the representation favoured the source culture, while the target, international and universal cultures were heavily under-represented. Therefore, the imbalance in the content of materials on different cultures needs to be redressed. While the main concern of this investigation is the frequency of appearance, which replicates the extent of source, target, international and universal cultures represented in the coursebooks, the impact of the materials, affected by how the cultural elements are used and perceived by teachers and pupils, is beyond the scope of the present study; hence, future studies in this area are deeply encouraged, and it is recommended for further research.
Practical implications
The implications for resolving the imbalance in cultural representation are also being explained.
Originality/value
Bearing in mind the importance of coursebooks as well as the role of culture in teaching the English language, this article aims at understanding about cultural representation within the newly developed Iranian English language coursebooks for schools, an issue that has never been studied by Iranian scholars with respect to the newly published materials.
Details
Keywords
The purpose of this paper is to show, with concrete cases, how to forgo or substantially moderate strategy that is structured within action plans: moves to alleviate coping with…
Abstract
Purpose
The purpose of this paper is to show, with concrete cases, how to forgo or substantially moderate strategy that is structured within action plans: moves to alleviate coping with obstacles encountered in programme execution.
Design/methodology/approach
The paper presents a series of real‐life examples of planned withdrawal – or not – from situations clearly uneconomic, unable to meet their original purposes, counterproductive, or otherwise a futile allocation of resources and effort.
Findings
The paper finds that studied protection can spell out beforehand, with foresight and determination (and often, due expression of trust), the success of an undertaking.
Research limitations/implications
Getting the future right often seems more difficult than getting it wrong.
Originality/value
Planners, strategists and designers should profit from the types of examples reviewed to confirm the solidity of their own procedural foresight.
Details
Keywords
Sungsoo Pyo and Richard L. Howell
During the early 1970s, per capita income of Koreans increased rapidly. The increased income was due to the speedy industrialization. Both increased income and mounting stress…
Abstract
During the early 1970s, per capita income of Koreans increased rapidly. The increased income was due to the speedy industrialization. Both increased income and mounting stress from jobs and the industrialized environment together induced Koreans to travel away from home to relax and regain strength to work.
Hyoung Seok Kang, Sang Do Noh, Ji Yeon Son, Hyun Kim, Jun Hee Park and Ju Yeon Lee
In this paper, a three-dimensional (3D) printer-based manufacturing line and supporting system, which supports personalized/customized manufacturing for individual businesses or…
Abstract
Purpose
In this paper, a three-dimensional (3D) printer-based manufacturing line and supporting system, which supports personalized/customized manufacturing for individual businesses or start-up companies, was studied to evaluate the practicality of using additive manufacturing for personalization/mass customization.
Design/methodology/approach
First, factory-as-a-service (FaaS) system, which provides factory as a service to customers, was proposed and designed to manufacture various products within a distributed manufacturing environment. This system includes 3D printer-based material extrusion processes, vapor machine/computer numerical control machines as post-processes and assembly and inspection processes with an automated material handling robot in the factory. Second, a virtualization module for the FaaS factory was developed using a simulation model interfaced with a cloud-based order and production-planning system and an internet-of-things-based control and monitoring system. This is part of the system for manufacturing operations, which is capable of dynamic scheduling in a distributed manufacturing environment. In addition, simulation-based virtual production was conducted to verify and evaluate the FaaS factory for the target production scenario. Main information of the simulation also has been identified and included in the virtualization module. Finally, the established system was applied in a sample production scenario to evaluate its practicality and efficiency.
Findings
Additive manufacturing is a reliable, feasible and applicable technology, and it can be a core element in smart manufacturing and the realization of personalization/mass customization.
Originality/value
Various studies on additive manufacturing have been conducted with regard to replacing the existing manufacturing methods or integrating with them, but these studies mostly focused on materials or types of additive manufacturing, with few advanced or applied studies on the establishment of a new manufacturing environment for personalization/mass customization.
Details
Keywords
Sang-Do Choi, Tae-Soo Eum, Eun Taek Shin and Chang Geun Song
Complicated motion of vortex is frequently observed in the wake of islands. These kinds of swirling fluid cause the trap of sediments or pollutants, subsequently inducing the dead…
Abstract
Purpose
Complicated motion of vortex is frequently observed in the wake of islands. These kinds of swirling fluid cause the trap of sediments or pollutants, subsequently inducing the dead zone, odor or poor water quality. Therefore, the understanding of flow past a circular cylinder is significant in predicting water quality and positioning the immersed structures. This study aims to investigate the flow properties around a structure using Navier-slip boundary conditions.
Design/methodology/approach
Boundary conditions are a major factor affecting the flow pattern because the magnitude of flow detachment on a surface can redistribute the tangential stress on the wall. Therefore, the authors performed an analysis of laminar flow passing through a circular structure to investigate the effect of boundary conditions on the flow pattern.
Findings
The authors examined the relationship between the partial-slip boundary conditions and the flow behavior at low Reynolds number past a circular cylinder considering velocity and vorticity distributions behind the cylinder, lift coefficient and Strouhal number. The amplitude of lift coefficient by the partial slip condition had relatively small value compared with that of no-slip condition, as the wall shear stress acting on the cylinder became smaller by the velocity along the cylinder surface. The frequency of the asymmetrical vortex formation with partial slip velocity was increased compared with no-slip case due to the intrinsic inertial effect of Navier-slip condition.
Originality/value
The ability to engineer slip could have dramatic influences on flow, as the viscous dominated motion can lead to large pressure drops and large axial dispersion. By the slip length control, no-slip, partial-slip and free-slip boundary conditions are tunable, and the velocity distributions at the wall, vortex formation and wake pattern including the amplitude of lift coefficient and frequency were significantly affected by slip length parameter.
Details
Keywords
Yu-Mi Lee, Na-Young Lee, Myung-Sub Chung, Sang-Do Ha and Dong-Ho Bae
The purpose of this paper is to analyze the fat, saturated fatty acid and trans fatty acid contents in ready-to-eat foods distributed at amusement parks to develop an appropriate…
Abstract
Purpose
The purpose of this paper is to analyze the fat, saturated fatty acid and trans fatty acid contents in ready-to-eat foods distributed at amusement parks to develop an appropriate food safety management system for children.
Design/methodology/approach
In all, 322 ready-to-eat food samples categorized into 17 types were collected from nine Korean amusement parks and their fat, saturated fatty acid and trans fatty acid contents were assessed.
Findings
Fat, saturated fatty acid and trans fatty acid contents were relatively high in flour-based products. On the basis of the Korea Food and Drug Administration classification, the samples in 12 categories were classified as high-fat foods. The samples in nine categories were classified as high-saturated fatty acid foods. Most samples also contained non-negligible levels of trans fatty acids. The fat, saturated fatty acid and trans fatty acid contents of samples even in the same category varied markedly.
Social implications
This research will inform the necessity of an appropriate safety management system for ready-to-eat foods distributed at amusement.
Originality/value
Although the fat contents of foods distributed around school area were often observed, the potential risk of those in ready-to-eat foods distributed at amusement parks have rarely been assessed. As patterns of food intakes vary world-widely, a periodic monitoring data like this study may be useful for international organizations and researchers.
Details
Keywords
This paper is a focused examination of the parallel collectivistic and individualistic tendencies of South Korean consumers. The “We-Me” concept argues that the two seemingly…
Abstract
This paper is a focused examination of the parallel collectivistic and individualistic tendencies of South Korean consumers. The “We-Me” concept argues that the two seemingly countervailing tendencies can actually co-exist. The paper discusses the phenomenon, its underlying causes, and the strategic implications of how to market to such consumers.