Search results

This paper covers the development of a novel defect model for concrete highway bridges. The proposed defect model is intended to facilitate the identification of bridge’s condition information (i.e. defects), improve the efficiency and accuracy of bridge inspections by supporting practitioners and even machines with digitalised expert knowledge, and ultimately automate the process.

The research design consists of three major phases so as to (1) categorise common defect with regard to physical entities (i.e. bridge element), (2) establish internal relationships among those defects and (3) relate defects to their properties and potential causes. A mixed-method research approach, which includes a comprehensive literature review, focus groups and case studies, was employed to develop and validate the proposed defect model.

The data collected through the literature and focus groups were analysed and knowledge were extracted to form the novel defect model. The defect model was then validated and further calibrated through case study. Inspection reports of nearly 300 bridges in China were collected and analysed. The study uncovered the relationships between defects and a variety of inspection-related elements and represented in the form of an accessible, digitalised and user-friendly knowledge model.

The contribution of this paper is the development of a defect model that can assist inexperienced practitioners and even machines in the near future to conduct inspection tasks. For one, the proposed defect model can standardise the data collection process of bridge inspection, including the identification of defects and documentation of their vital properties, paving the path for the automation in subsequent stages (e.g. condition evaluation). For another, by retrieving rich experience and expert knowledge which have long been reserved and inherited in the industrial sector, the inspection efficiency and accuracy can be considerably improved.

The purpose of this paper is to study the complex aerosol dynamic processes by using this newly developed stochastically weighted operator splitting Monte Carlo (SWOSMC) method.

Stochastically weighted particle method and operator splitting method are coupled to formulate the SWOSMC method for the numerical simulation of particle-fluid systems undergoing the complex simultaneous processes.

This SWOSMC method is first validated by comparing its numerical simulation results of constant rate coagulation and linear rate condensation with the corresponding analytical solutions. Coagulation and nucleation cases are further studied whose results are compared with the sectional method in excellent agreement. This SWOSMC method has also demonstrated its high numerical simulation capability when used to deal with simultaneous aerosol dynamic processes including coagulation, nucleation and condensation.

There always exists conflict and tradeoffs between computational cost and accuracy for Monte Carlo-based methods for the numerical simulation of aerosol dynamics. The operator splitting method has been widely used in solving complex partial differential equations, while the stochastic-weighted particle method has been commonly used in numerical simulation of aerosol dynamics. However, the integration of these two methods has not been well investigated.

The purpose of this paper is to analyse consumer purchasing behaviour in different cultural settings by exploring the value of consumer reviews from various countries.

This study uses online review mining technology to collect, process and analyse user review data from multiple countries. The main procedures of this research are data collection, data pre-processing, feature extraction and sentiment analysis. Online reviews from the American, British and Indian websites for the iPhone 5s are analysed.

Every country has unique cultural characteristics, and these cultural differences affect consumers’ perceptions, attitudes and purchasing behaviours. The results show that consumers from different countries exhibit different levels of attention towards the same product and have different emotional inclinations for the same product feature. In addition, the study also identified the advantages and disadvantages of the product.

The user reviews provide abundant feedback information that serves as a good intelligence resource for companies. Under the premise of different language habits, this paper uses a universal approach to analyse consumer behaviour from online reviews in different countries, which can help reveal consumers’ emotional inclination towards each feature of a product. This approach can be extended to other brands of mobile phones or other industries.

Multinational companies should analyse the cultural characteristics of target groups when proposing transnational development strategies. Companies can understand the perceptions of their products based on the consumer reviews and can formulate their marketing and product strategies by considering consumer purchasing behaviours arising from cultural differences.

This study identifies differences in consumer behaviour in different cultural settings by using a data mining method, which can help companies understand consumer perceptions and the performance and quality of product features.

The purpose of this paper is to conduct a survey on research in fabric and cloth simulation using mass spring model. Also in this paper some of the common methods in process of fabric simulation in mass spring model are discussed and compared.

This paper reviews and compares presented mesh types in mass spring model, forces applied on model, super elastic effect and ways to settle the super elasticity problem, numerical integration methods for solving equations, collision detection and its response. Some of common methods in fabric simulation are compared to each other. And by using examples of fabric simulation, advantages and limitations of each technique are mentioned.

Mass spring method is a fast and flexible technique with high ability to simulate fabric behavior in real time with different environmental conditions. Mass spring model has more accuracy than geometrical models and also it is faster than other physical modeling.

In the edge of digital, fabric simulation technology has been considered into many fields. 3D fabric simulation is complex and its implementation requires knowledge in different fields such as textile engineering, computer engineering and mechanical engineering. Several methods have been presented for fabric simulation such as physical and geometrical models. Mass spring model, the typical physically based method, is one of the methods for fabric simulation which widely considered by researchers.

Considering the response lag and viscous slip oscillation of the system caused by cylinder piston friction during automatic polishing of aero-engine blades by a robotic pneumatic end-effector, the purpose of this study is to propose a constant force control method with adaptive friction compensation.

First, the mathematical model of the pneumatic end-effector is established based on the continuous LuGre model, and the static parameters of the LuGre model are identified to verify the necessity of friction compensation. Second, aiming at the problems of difficult identification of dynamic parameters and unmeasurable internal states in the LuGre model, the parameter adaptive law and friction state observer are designed to estimate these parameters online. Finally, an adaptive friction compensation backstepping controller is designed to improve the response speed and polishing force control accuracy of the system.

Simulation and experimental results show that, compared with proportion integration differentiation, extended state observer-based active disturbance rejection controller and integral sliding mode controller, the proposed method can quickly and effectively suppress the polishing force fluctuation caused by nonlinear friction and significantly improve the blade quality.

The pneumatic force control method combining backstepping control with the friction adaptive compensation based on LuGre friction model is studied, which effectively suppresses the fluctuation of normal polishing force.

Megaproject performance measurement (MPM) has received great attention in the project management community, but it primarily focused on the design of performance measures or frameworks. Yet, whether MPM utilization can improve megaproject performance and how project actors use MPM to improve megaproject performance is less well understood. This study aims to investigate whether and how the use of MPM can contribute to better megaproject performance.

Through the lens of the lever of control, this study conceptualizes MPM utilization as diagnostic use and interactive use. A holistic research model and related hypotheses integrating MPM use, project complexity and megaproject performance were established. The model was validated using a partial square-structural equation modeling method.

Based on 214-megaproject data collected through a questionnaire survey in China, the results show positive effects of diagnostic use and interactive use on megaproject performance. Both, however, have substitutional interaction effects. The moderating results suggest that the higher project complexity weakens the positive effects of MPM utilization on megaproject performance.

This study advances megaprojects performance measurement and management literature by validating the value of MPM utilization on performance. It also presents practical implications for project managers to improve performance by appropriate MPM utilization.

Cryptocurrencies, such as Bitcoin, generate innovative and fast exchanges without any physical form and facilitate online payments; thus, they may bring about revolutions of the future economic system. Recent investigations reveal that China, the second largest Bitcoin market, accounts for a huge volume of Bitcoin trading and mining, which can cast distinct influences on future values of Bitcoin. Therefore, it would be of great significance to probe into the repurchase intention of Bitcoin of the Chinese individuals.

One hundred and forty-three questionnaires were collected from Chinese respondents. SPPS was employed for data analysis of the proposed hypotheses.

The results show that expectation has a positive impact on perceived enjoyment and perceived ease of use. A positive relationship between perceived ease of use and perceived enjoyment was confirmed. The findings also reveal that expectation, perceived enjoyment and perceived ease of use have significant impact on satisfaction. Moreover, it is found that perceived enjoyment, perceived ease of use and satisfaction significantly influence the repurchase intention of Bitcoin.

This study encourages future comparative studies to be conducted. Besides, it is recommended to find out other possible antecedents of repurchase intention. Moreover, this study suggested negative effects of Bitcoin to be explored.

In a practical standpoint, this study provides valuable suggestions about cryptocurrencies use and regularization. For instance, education and learnability issues of novice users need to be considered. Further, the regularization/implementation of cryptocurrencies/blockchain technologies is also suggested.

This is the pioneer endeavor which investigates the repurchase intention of Bitcoin. The findings explore some of the possible antecedents which influence repurchase intention of Bitcoin. These findings provide valuable insights and enrich the existing body of literature in the domain of Bitcoin.

The purpose of this paper is to analyze the influence of different factors on forestry production, with an aim to explore the degree of connection between forestry economic growth and influencing factors such as forestry investment, labor input, afforestation area, scientific and technologies progress, and the reform of property-rights regimes.

According to the data of China Forestry Statistical Yearbook from 1978 to 2017, this paper uses the grey correlation analysis to observe and analyze the factors influencing China’s forestry economics growth.

The results show that capital investment demonstrates the largest impact on the forestry output value, followed by property system, afforestation area, labor input and technologies progress. The correlation coefficients of the above factors are 0.874451654,0.85827468,0.835138412,0.832985604 and 0.825747493. This means that forestry capital investment plays a major role in contributing to forest economic growth; forest property system also plays a positive role in the growth of forestry economy.

This paper uses continuous data collected during 1978‒2017, which are quite extensive as compared to data used in the existing research, considering the influencing factors are comprehensive, especially the impact of property right system reform on forestry economic growth.

Drawing on social identification theory, this research aims to explore an important mechanism – patients’ perceived empathy from a hospital, which is defined as caring, individualized attention provided by the hospital – that explains how service quality influences patients’ loyalty to the hospital.

This study adopts a structural equation modelling framework to estimate the mediation relationship between service quality and patient loyalty using two studies based on hospital employees and patients.

In Study 1, hospital staff survey data showed that service quality enhanced patients’ perceived empathy from the hospital. In Study 2, the authors confirmed and extended the findings of Study 1 by using patient survey data that suggested that patients’ empathy mediated the relationship between service quality and patients’ loyalty to the hospital.

The results of the two studies suggested that service quality increased patients’ empathy, which in turn improved patients’ loyalty to a hospital. The results extend the customer loyalty literature by exploring the critical antecedents and mechanisms of customer loyalty in the healthcare context. The studies interpret healthcare phenomena from the service aspect of fulfilling patients’ unique needs and providing a good hospital service experience. Moreover, the authors offer an insightful approach to explaining the service quality–patient loyalty linkage in the healthcare industry. Important theoretical and managerial contributions and suggestions for future research are discussed.

In the past few decades, traditional project management theories mainly focused on quality, cost and schedule. However, with larger scale and wider influence of infrastructure projects, especially in megaprojects, social problems have gradually become pressing issues in the field of project governance. As the public is the main body of society, public participation has attracted the attention from both the academic field and industry field. Despite people are gradually realizing the significance of public participation, a deeper and more systematic understanding is still needed to be developed in this field. Therefore, this paper aims to conduct a systematic literature review on public participation in infrastructure projects. Based on existing literatures, this paper draws a knowledge map and develops a research framework in this field. Also, this paper tries to provide some theoretical and practical directions for the future.

In total, 142 papers from Web of Science Core collection were selected to be used in this systematic review. Quantitative analysis of this paper is concentrated on the knowledge map with bibliometric tools. Qualitative analysis is concentrated on identifying the research framework.

This paper reviewed existing literatures and the results are as below. Firstly, the results show a knowledge map containing knowledge domains, knowledge frontiers and knowledge evolution of research fields in public participation. Secondly, the results indicate a research framework in this field, including situational dimension, implementation dimension, individual dimension and influence dimension. Moreover, each dimension has several research topics, respectively. Finally, according to the results, the paper proposes practical suggestions for stakeholders and research directions for further study.

It is the first paper to draw a holistic knowledge map and build up a multilevel framework for public participation in the field of infrastructure projects. This paper bridges the gap in both quantitative and qualitative identification of existing literatures in this field. Besides, this paper proposes some practical suggestions and research directions for further study and development of public participation.