Search results

The paper proposes a two-level closed-loop supply chain (CLSC) dynamic competitive model based on different competitive cooperation situations, and explores the impact of competitive cooperation methods on the pricing strategies, recycling and remanufacturing strategies and competitive model selection strategies of supply chain firms.

This paper establishes a CLSC game consisting of a manufacturer and two retailers. Firstly, five CLSC models are established in both horizontal and vertical dimensions, each of which competes with one another. Secondly, the recycling and remanufacturing pricing strategies are analyzed under different competition or cooperation models. Finally, the results are verified through numerical analysis.

The overall profitability of the CLSC is highest when the manufacturer–retailer partnership alliance is in place. The relationship between retailers and manufacturers is also found to be the best way to achieve overall optimization of the CLSC.

The paper investigates the relationship between the competitive partnership and the total profit of the CLSC, taking into account how to optimize the overall benefit, and focusing on how to optimize the individual interests of each participating enterprise. The results can provide basis and guidance for managers' pricing decision and competition cooperation.

The purpose of this paper is to improve the lattice Boltzmann method’s ability to simulate a microflow under constant heat flux.

Develop the thermal lattice Boltzmann method based on double population of hydrodynamic and thermal distribution functions.

The buoyancy forces, caused by gravity, can change the hydrodynamic properties of the flow. As a result, the gravity term was included in the Boltzmann equation as an external force, and the equations were rewritten under new conditions.

To the best of the authors’ knowledge, the current study is the first attempt to investigate mixed-convection heat transfer in an inclined microchannel in a slip flow regime.

The purpose of the current paper is to develop a numerical methodology, based on the immersed boundary-lattice Boltzmann computational framework, for the Neumann and Dirichlet boundary conditions in problems involving natural and forced convection heat transfer.

The direct forcing immersed boundary method is extended to study the heat transfer by incompressible flow within the thermal lattice Boltzmann method (LBM) computational framework. The direct forcing and heating immersed boundary-LBM introduces a heat source term to the thermal LBM to account for the heat transfer occurring at the immersed boundary. New numerical treatments for the Neumann type of boundary condition and for the calculation of the local Nusselt number are developed. The developed methodologies have been applied to flows around immersed bodies with natural and forced convection, including steady as well as unsteady flows.

Numerical experiments involving immersed bodies in natural and forced convection have been performed in order to assess the validity of the direct heating IB-LBM. The flow cases studied also include steady and transient flow phenomena. Flow velocity field and isotherms have been used for qualitative comparisons with existing, published results. The surface averaged Nusselt number, Strouhal number, and lift coefficient (for the unsteady flow cases) have been used for quantitative comparison with published results. The results show that there are satisfactory agreements, qualitatively and quantitatively, between the results obtained by using the present method and those previously published.

Limited application of immersed boundary to thermal flows within the LBM has been studied by researchers; the few past studies were limited to Dirichlet boundary conditions and/or using of feedback forcing and heating approaches. In the current paper, the direct forcing and heating approach was used which helps to eliminate the arbitrary constants used in the feedback approaches. The developed new numerical treatments for the Neumann type of boundary condition and for the calculation of the local Nusselt number eliminate the need to determine surface normal and temperature gradient in the normal direction for heat transfer calculation, which is particularly beneficial in cases with deforming or changing boundaries.

This paper aims to examine how using lattice Boltzmann method (LBM) aids the study of the isothermal‐gas flow with slight rarefaction in long microtubes.

A revised axisymmetric lattice Boltzmann model is proposed to simulate the flow in microtubes. The wall boundary condition combining the bounce‐back and specular‐reflection schemes is used to capture the slip velocity on the wall. Appropriate relation between the Knudsen number and relax‐time constant is defined.

The computed‐slip velocity, average velocity and non‐linear pressure distribution along the microtube are in excellent agreement with analytical solution of the weakly compressible Navier‐Stokes equations. The calculated‐friction factors are also consistent with available experimental data. For simulations of slip flow in microtube, LBM is more accurate and efficient than DSMC method.

The laminar flow in circular microtube is assumed to be axisymmetric. The present LBM is only applied to the simulation of slip flows (0.01 < Kn₀<0.1) in microtube.

Lattice‐BGK method is a very useful tool to investigate the micro slip flows.

A revised axisymmetric D2Q9 lattice Boltzmann model is proposed to simulate the slip flow in axisymmetric microtubes.

The purpose of this paper is to develop a counter-extrapolation approach for computational heat and mass transfer with the interfacial discontinuity considered at conjugate interfaces.

By applying finite-difference approximations for the interfacial gradients along the local normal direction, the conjugate system can be simplified to the Dirichlet boundary problems for individual domains. A suitable method for the Dirichlet boundary value condition can then be used. The lattice Boltzmann method has been used to demonstrate the method. The model has been carefully validated by comparing the simulation results and theoretical solutions for steady and unsteady systems with flat or circular interfaces. Furthermore, the cooling process of a hot cylinder in a cold flow, which involves unsteady flow and heat transfer across a curved interface, has been simulated as an example to illustrate the practical usefulness of this model.

Good agreement has been observed in comparisons of simulations and theoretical solutions. The convergence and stability of the method have also been examined and satisfactory results have been obtained. Results of the cylinder cooling process show that a surface insulation layer can effectively reduce the heat transfer process and slow down the cooling process.

This method possesses several technical advantages, including the simple and straightforward algorithm, and accurate representation of the interface geometry. The basic idea and algorithm of the counter-extrapolation procedure presented here can be readily extended to other lattice Boltzmann models and even other computational technologies for heat and mass transfer systems with interface discontinuity.

The screw extruder is applied in cement-three-dimensional (3D) printing. The cement paste flow in 3D printing is the typical Herschel–Bulkley fluid. To understand the flow in the channel, the improved lattice Boltzmann method (LBM) is proposed.

For Herschel–Bulkley flow, an improved LBM is presented to avoid the poor stability and accuracy. The non-Newtonian effect is regard as a special forcing term. The Poiseuille flow is taken to discuss the detailed process of the method. With the method, the analytical solution and numerical solution are obtained and compared. Then, the effect of the initial yield stress on the numerical solution is both explored by the shear-thickening fluid and the shear-thinning fluid. Moreover, the variations of the relative errors under different lattice nodes and different power-law indexes are analyzed. Finally, the method is applied into the simulation of the flow in the extruder of cement-3D printing.

The results show that the improved method is effective for Herschel–Bulkley fluids, which can simulate the flow in the extruder stably and accurately.

The simulation can contribute to understand the cement paste flow in the screw extruder, which helps to optimize the structure of the extruder in the following periods.

The improve method provide a new way to analyze the flow in the extruder of cement-3D printing. Also, in the past research, LBM for Herschel–Bulkley fluid is ignored, whereas the study can provide the reference for the numerical simulation.

This study produced epoxy-filled urea-formaldehyde (UF) microcapsules (MCs) and T-403 amine MCs using the in situ technique. The Taguchi method was used to determine the effects of the control factors (temperature, stirring speed, core-shell ratio and surfactant concentration) affecting MCs’ core diameter and core content and optimizing their optimum levels with a single criterion. Optimum control factor levels, which simultaneously provide maximum core diameter and core content of MCs, were determined by the PROMETHEE-GAIA multi-criteria optimization method. In addition, the optimized MC yield was analyzed by thermal camera images and compression test.

Microcracks in materials used for aerospace vehicles and automotive parts cause serious problems, so research on self-healing in materials science becomes critical. The damages caused by micro-cracks need to heal themselves quickly. The study has three aims: (1) production of self-healing MCs, mechanical and chemical characterization of produced MCs, (2) single-criteria and multi-criteria optimization of parameters providing maximum MC core diameter and core content, (3) investigation of self-healing property of produced MCs and evaluation. Firstly, MCs were produced to achieve these goals.

The optimized micro cures are buried in the epoxy matrix at different concentrations. Thermal camera images after damage indicate the presence of healing. An epoxy-amine MC consisting of a 10% by weight filled aluminum sandwich panel was prepared and subjected to a quasi-static compression test. It was determined that there is a strong bond between the UF shell and the epoxy resin.

The optimization of production factors has been realized to produce the most efficient MCs that heal using less expensive and more accessible methods.

Transient response of continuous composite material (CCM) fin made of high thermally conductive composite material is presented. The continuously varying effective properties of composite material such as thermal conductivity, heat capacity and density have been modelled using the Mori-Tanaka homogenization theory and rule of mixture. Additionally, temperature dependency of thermal conductivity, heat generation (composite materials) and convection coefficient (fluid properties) have also been incorporated. Different base boundary conditions are addressed such as oscillating heat flow, oscillating temperature, step-changing heat flow and step-changing temperature. At the other boundary, the fin is assumed to have a convective tip.

Lattice Boltzmann method is implemented using an in-house source code for obtaining the numerical solution of typical non-linear heat balance equation of the aforementioned problem under various transient base boundary conditions.

The effects of various thermal parameters such as material diffusivity ratio and conductivity ratio, area ratio and Biot number on transient response of fin and temperature distribution of fins are studied and interpreted. The heat transfer rate and time for attainment of steady state temperature of metal matrix composite (MMC) fin are found to be proportionally dependent on their diffusivity ratio. Additionally for higher values of area ratio and biot number, MMC fins are reported to dissipate the heat more efficiently in comparision to homogeneous fins in terms of time required to attain the steady state and surface temperature.

Response of transient fin associated with advanced class of material can facilitates the practicing engineers for designing high-performance and/or miniaturized thermal management devices as used in electronic packaging industries.

Studies of composite fin consisting of laminating second layer of material over the first layer have been reported previously, however transient response of CCM fin fabricated by continuously varying the volume fraction of two materials along the fin length has not been reported till date. Such material finds its application in thermal management and electronic packaging industries. Results are plotted in form of a graph for different application-wise material combinations that have not been reported earlier, and it can be treated as design data.

Although the literature recognizes that coopetition plays a significant role in the success of international construction joint ventures (ICJVs), the impacts of coopetition on the performance outcomes of ICJVs remain largely unknown. This study extends this line of research by theorizing coopetition from three dimensions, i.e. coopetition intensity, coopetition balance and coopetition structure, and examining the relationships between coopetition and ICJV performance outcomes from both the contingency and configuration perspectives.

The hypotheses were tested using survey data from a sample of 188 ICJVs. Structural equation modelling was employed for the contingency approach to estimate the relationships between the three dimensions of coopetition and performance. For the configuration approach, cluster analysis was utilized to identify coopetition patterns. Subsequently, an analysis of variance was employed to analyse the relationships between these coopetition patterns and performance.

The contingency results indicate that while coopetition intensity is positively related to all types of performance, coopetition balance is only positively related to project performance and partner performance. Moreover, coopetition structure is only related to partner performance and socioenvironmental performance. The configuration approach identifies six patterns of coopetition, manifesting different levels of project, partner and socioenvironmental performance.

These findings, therefore, contribute to the ICJV literature by extending the understanding of how coopetition dimensions individually and jointly influence ICJV performance.

This study aims to employ a modern numerical approach for conducting the simulations, which uses the smoothed-profile lattice Boltzmann method. Two separate distribution functions for flow and temperature fields are used to solve the Navier–Stokes equations in the most efficient manner. In addition, the Koo–Kleinstreuer–Li model is used to calculate the dynamic viscosity and thermal conductivity in the desired volume fractions, and the effect of Brownian motion is taken into consideration.

Nowadays, because of enhanced global price of oil and critical issue of global warming, a significant demand for using renewable energy exists. The solar energy is one of the most popular forms of renewable energy. The solar collector can be used to collect and trap the energy received from the sun. The present work focuses on introducing and investigating a parabolic-trough solar collector.

To analyze all hydrodynamic and thermal views of the solar collector, the structure of nanofluid stream, distribution of temperature, local dissipations because of flow and heat transfer, volumetric entropy production, Bejan number vs Rayleigh number and volume fraction are presented. Also, three different configurations for profile of solar receiver are designed and studied.

The originality of the present work is in using a modern numerical approach for a well-known application. Also, the effect of Brownian motion is taken into account which significantly enhances the accuracy.